Search found 8560 matches
- Sat May 18, 2024 10:40 pm
- Forum: GTMEDIA GT SERIES (Android DVB & IPTV BOX)
- Topic: 4:2:2 Chroma
- Replies: 4
- Views: 172
Re: 4:2:2 Chroma
Feralkiwi are saying the apps downloaded into the box are somehow interfering with the processing of the video?The video I was able to view was I think 50Mb/s and 1280x720P.Could suggest which apps maybe responsible for the interference?Thanks C.H. Other apps running will use processor time and int...
- Thu May 16, 2024 8:46 pm
- Forum: GTMEDIA GT SERIES (Android DVB & IPTV BOX)
- Topic: 4:2:2 Chroma
- Replies: 4
- Views: 172
Re: 4:2:2 Chroma
The issue with 4:2:2 has been with video at high bit rates.
15Mb/s is jumpy, 40Mb/s shows a few lines only.
Processing time?
other apps interrupting?
Owen
15Mb/s is jumpy, 40Mb/s shows a few lines only.
Processing time?
other apps interrupting?
Owen
- Wed May 15, 2024 8:54 pm
- Forum: GTMEDIA FINDER SERIES
- Topic: GT finder 2两个版本有什么不同?
- Replies: 1
- Views: 796
Re: GT finder 2两个版本有什么不同?
The green is the earlier hardware that has a 3.7v under powered battery.
Buy the black one with the 7.2 volt battery.
Owen
Buy the black one with the 7.2 volt battery.
Owen
- Tue May 14, 2024 10:30 pm
- Forum: GTMEDIA V8 SERIES
- Topic: v8 update to v347
- Replies: 15
- Views: 373
- Mon May 13, 2024 9:47 pm
- Forum: GTMEDIA GT SERIES (Android DVB & IPTV BOX)
- Topic: Taking a screenshot
- Replies: 17
- Views: 1090
Re: Imagem
Até o momento eu ainda não consegui configurar uma boa imagem no meu Gtx Combo, a minha tv é uma smart 4k, já tentei 4:2:2, 4:4:4 Rgb, em uma jogo de futebol a imagem parece em camera lenta e sem brilho, já aqui com outro aparelho de outra marca também android 4k é bonita a imagem com brilho nitide...
- Mon May 13, 2024 7:13 am
- Forum: GTMEDIA V7 SERIES
- Topic: Aggiornamento crd tv sat con gt media v7 pro
- Replies: 8
- Views: 283
Re: Aggiornamento crd tv sat con gt media v7 pro
Most PayTV cards receive a data signal via the PayTV set top box each month or even weekly.
The card times out and needs to be placed back into the payTV receiver to wait for the data signal authorizing it again.
Owen
- Sun May 12, 2024 9:09 pm
- Forum: GTMEDIA FINDER SERIES
- Topic: GTMedia V8 Finder V-71HD upgrade Firmware
- Replies: 20
- Views: 2501
- Sun May 12, 2024 4:32 am
- Forum: GTMEDIA FINDER SERIES
- Topic: Release V8 Finder BT03 sample
- Replies: 7
- Views: 7297
Re: Release V8 Finder BT03 sample
Those units will not power on if connected to the charger.southernconnectdriver wrote: ↑Sat May 11, 2024 2:09 pmI have this bt03 but it's only showing red light and it's not connecting please is there any solution to the power port
Will not power on if not charged.
Owen
- Fri May 10, 2024 9:49 pm
- Forum: GTMEDIA GT SERIES (Android DVB & IPTV BOX)
- Topic: Taking a screenshot
- Replies: 17
- Views: 1090
Re: Taking a screenshot
If you mean that you do not see that screen at power on, you may have set a startup app in customize.
I have mine set to DVB app so it boots into the DVB app / TV.
Owen
I have mine set to DVB app so it boots into the DVB app / TV.
Owen
- Fri May 10, 2024 9:46 pm
- Forum: GTMEDIA GT SERIES (Android DVB & IPTV BOX)
- Topic: Taking a screenshot
- Replies: 17
- Views: 1090
Re: Taking a screenshot
Normally just press exit twice to return there.
Owen
Owen
- Thu May 09, 2024 7:49 pm
- Forum: España
- Topic: V8UHD muerto 🤦🤦🤦🤦
- Replies: 13
- Views: 454
Re: V8UHD muerto 🤦🤦🤦🤦
If you have a multi meter or volt meter, check 12 volts is reaching the main board.
Owen
Owen
- Thu May 09, 2024 7:45 pm
- Forum: España
- Topic: V8UHD muerto 🤦🤦🤦🤦
- Replies: 13
- Views: 454
Re: V8UHD muerto 🤦🤦🤦🤦
Does it have any lights on the front panel?
Owen
Owen
- Tue May 07, 2024 10:01 pm
- Forum: GTMEDIA GT SERIES (Android DVB & IPTV BOX)
- Topic: GT Combo has no video signal
- Replies: 2
- Views: 163
Re: GT Combo has no video signal
No idea of what to fix. To avoid this again add earth wires from TV to combo and to the TV antenna ground so any ground currents do not use the HDMI cable. Even a AV cable will help, but then the combo does not have one. I had issues with an electric fence clicking the video and a AV cable stopped i...
- Sun May 05, 2024 2:21 am
- Forum: GTMEDIA V7 SERIES
- Topic: Scanning 82.0W and 91.1W
- Replies: 5
- Views: 182
Re: Scanning 82.0W and 91.1W
It may be a low signal that is just got by your other unit, but is below the sensitivity of your new unit.
Owen
Owen
- Fri May 03, 2024 9:13 pm
- Forum: GTMEDIA V8 SERIES
- Topic: No HDMI signal v8 turbo and v8 uhd Help Help!
- Replies: 6
- Views: 260
Re: No HDMI signal v8 turbo and v8 uhd Help Help!
It maybe that your switch does not like the resolution that the boxes are outputting. Have you tried changing the resolution? Your HDMI switch? Has it had a fault that has damaged the UHD and Turbo? I burnt out a HDMI switch by plugging in 12V instead of the 5V it wanted. I now place red tape over t...
- Fri May 03, 2024 9:06 pm
- Forum: GTMEDIA GT SERIES (Android DVB & IPTV BOX)
- Topic: 3 questions from a newbie
- Replies: 2
- Views: 115
Re: 3 questions from a newbie
I think you can watch a channel on the same TP as you are recording a channel. There is only one satellite receiver, so only one tP can be seen. You should also be able to watch a channel off the DVT-T. A factory reset should return the satellite list, but will remove everything else you have done. ...
- Fri May 03, 2024 9:02 pm
- Forum: GTMEDIA V8 SERIES
- Topic: V8X enter BISS CW
- Replies: 1
- Views: 129
Re: V8X enter BISS CW
If you start on the channel and then go to add BISS key, the correct sid / freq etc will be there.
Then just replace the 16 x zero with the key.
When you press info on a channel at the bottom right there are three numbers with a / between them.
1165/1167/1
VPID / APID / SID
Owen
Then just replace the 16 x zero with the key.
When you press info on a channel at the bottom right there are three numbers with a / between them.
1165/1167/1
VPID / APID / SID
Owen
- Sun Apr 28, 2024 9:17 pm
- Forum: 中国
- Topic: 谁有GT V8X 亚洲的卫星列表 共享下
- Replies: 1
- Views: 603
Re: 谁有GT V8X 亚洲的卫星列表 共享下
The best way is to add each satellite to your unit and then blind scan in the channels.
I see satellites from 100.5e to 177w.
My lists would have many satellites and channels you will not see from the north.
Your list will have satellites I do not see from the south.
Owen
I see satellites from 100.5e to 177w.
My lists would have many satellites and channels you will not see from the north.
Your list will have satellites I do not see from the south.
Owen
- Sun Apr 28, 2024 9:11 pm
- Forum: GTMEDIA X8 SERIES
- Topic: Poder descubrir las Key Biss
- Replies: 5
- Views: 268
Re: Poder descubrir las Key Biss
Hola Den Son feeds ocasionales. En el menú oculto que trae el deco v8x ....en la opción de keys .... aparece vacío el segmento de keys. Aun así...el deco funciona descifrando y abriendo esos canales, pero no entrega la opción de visualizar aquellas keys descifradas. I thought that if you export the...
- Sun Apr 28, 2024 9:09 pm
- Forum: GTMEDIA X8 SERIES
- Topic: V8X see channel bitrate
- Replies: 2
- Views: 130
Re: V8X see channel bitrate
Looked at my V8X and can not find any way to see bit rate.
Unless here is some hidden service page, it looks like there is no way.
Owen
Unless here is some hidden service page, it looks like there is no way.
Owen
- Tue Apr 16, 2024 10:38 pm
- Forum: GTMEDIA GT SERIES (Android DVB & IPTV BOX)
- Topic: Taking a screenshot
- Replies: 17
- Views: 1090
Re: Taking a screenshot
Yes I just tested and just the TV picture a black screen is saved. With menu graphics over the picture, as you have found yes just the graphics. There is some error in this or rights protection is stopping the video part from being screen shot. I have been told that Windows PC screen shots has added...
- Tue Apr 16, 2024 7:56 pm
- Forum: Others
- Topic: Dual satellite tuner receiver?
- Replies: 2
- Views: 409
Re: Dual satellite tuner receiver?
I find it best to have the USALS ku mover on port one of a DiSEqC switch as if a power surge happens the switch reverts to port one.
Remember you can not use a 22kHz switch before USALS or DiSEqC movers. The control pulses are 22kHz, so the 22kHz switch will pulse as well.
Owen
Remember you can not use a 22kHz switch before USALS or DiSEqC movers. The control pulses are 22kHz, so the 22kHz switch will pulse as well.
Owen
- Mon Apr 15, 2024 8:13 pm
- Forum: GTMEDIA GT SERIES (Android DVB & IPTV BOX)
- Topic: Taking a screenshot
- Replies: 17
- Views: 1090
Re: Taking a screenshot
Press and hold the power button.
Then select screen shot.
The pic is then in local disk, pictures/screenshots.
I do not know how you get it out of there?
Owen
Then select screen shot.
The pic is then in local disk, pictures/screenshots.
I do not know how you get it out of there?
Owen
- Fri Apr 12, 2024 11:49 pm
- Forum: GTMEDIA V8 SERIES
- Topic: V8UHD Blind Search Freeze
- Replies: 3
- Views: 415
Re: V8UHD Blind Search Freeze
You can enter the TP info into the TP list and do a auto (manual) scan, just leave the TP that gets stuck off the list.
Owen
Owen
- Fri Apr 12, 2024 8:46 pm
- Forum: GTMEDIA GT SERIES (Android DVB & IPTV BOX)
- Topic: Booting
- Replies: 1
- Views: 280