GTMEDIA Forum

For Mars software you have to visit there (Facebook) page.

Den

Glad to hear that you are now sorted.

Den

With the connection RF TO TV, you must retune your TV to get the signal from the receiver, they use the old system before everything went digital. The output are on (CH. 10 209Mhz) and (CH. 36 591Mhz), which will be connected to (Aerial) input on the TV, make sure that you have NO other connections ...

Upgrade is required on receivers with (OS) software, works OK with (Mars) software and Softcam from cloud 24 Feb 2024.

Den

Are there going to be any updates against the said receivers, for users who wish to view the BBC SAT BACK channels now at 15w.

Den

The HEX for BBC ONE LONDON HD is 4484 BBC TWO HD 4440 ITV ONE HD 44c8 CH 4 HD 4500 CH 5 HD 4540 CBBC HD 46c0 CBEEBIES HD 4700 FIVE SELECT 4f20 BBC NEWS 1100 BBC PARLIAMENT 1280 BBC THREE HD 4600 BBC FOUR HD 4680 BBC RED BUTTON 1c00 TBN UK 4ec0 There are others for the (SD) channels Den

PM Sent.

Den

To get to the softcam, Menu / Network / OK / 6666 / Key Edit / OK / Move Curser to Biss / OK.

Will PM details.

Den

When you go to the transponder search, put in the following, SCAN MODE / Normal, FTA Only / No, Scan Channel / TV, Network Search / No.

Den

What type of scan were you carrying out.

Den

With you saying that you were getting channels from 15w, can you confirm what these were.
Did you scan in the BBC channels on your V8.

Den

With any GTMedia that has (OS) software, you MUST do a BACK-UP of your CHANNEL LIST and SOFTCAM before you carry out a UPDATE. With the BBC SAT BACK channels now moved to 15w, the FOOTPRINT is now more on UK/NORTH SEA, with two powerful signals along side this footprint. What is your location, check...

Lets confirm first, what satellite's / channels do you wish to view, then users will then confirm.

Den

Let users know what satellite / transponder.

Den

Have any members of your family or a neighbour got a authorise receiver that you can use to update the card.

Den

Some information which should help you set your receiver to USALS. Menu / Install / Satellite List / On the left of the screen, you should have a list of Satellites, with a Satellite which should be (High-Lighted). The information about this satellite will be on the Right, with the Arrows on the Rem...

Can you confirm what receiver that you have and with what software, then users will be able to explain how to put in your USALS details.

Den

The last update for this receiver with (OS) software was V249 30 Nov 2023. Which is on this forum. Before you carry out ANY UPDATE, you must SAVE your CHANNEL LIST ETC / ALSO the SOFTCAM (if you use that to decode some channels) to a USB, carry out the UPDATE then reinput your CHANNEL LIST / SOFTCAM...

Like with any card, you need to use a authorise receiver to keep you card up to date.

Den

I use this (HDMI Switch), when switching from a motor system (V8UHD) to a Diseq system (V8 Turbo), works just find, have been using
it for a while now,

Den

Within the receiver have you checked the (Scart Output) and the (Display Mode).
1. What software do you have on your receivers.
2. What was the purpose of the (HDMI Switch).

Den

With out a PC, you will be lost, have a word with a few of your friends, to see if they have a PC, or even a old one that they give you to use.
Then let us know what you require from the V8UHD receiver.

Den

You may at some point, have to use a authorised receiver to keep the card updated, to be able to use in your receiver.

Den

With your last post you are shouting, do not do it.

Den

Try Aliexpress.

Den