Search found 118 matches

by Yankee495
Tue Mar 27, 2018 1:33 am
Forum: Freesat & GTMedia V8
Topic: NewsMax tv
Replies: 15
Views: 1713

Re: NewsMax tv

I just checked 125.0w and TP-3900-V-29080 is dead. Hi. I may not be the best to just signal by. I have some hail damage on my dish which did hurt the signal a little but I'm going to replace it soon with a 10' dish that a friend gave me if it has Ku compatible mesh, I haven't seen it yet. If not, I...
by Yankee495
Tue Mar 27, 2018 12:19 am
Forum: Freesat & GTMedia V8
Topic: NewsMax tv
Replies: 15
Views: 1713

Re: NewsMax tv

I watch This TV on 3900v and that transponder is dead. Not the whole bird, just that one transponder so I don't know what to think.

EDIT: It's back but weak. Also, I have a black screen with sound.
by Yankee495
Tue Apr 25, 2017 10:42 pm
Forum: Softcam :Biss/PowerVu/Tandberg
Topic: powervu keys
Replies: 104
Views: 24407

Re: powervu keys

840 wrote:try 115 west ,the tv channels are there and i think the radio channels are on 105 west.


Thank you. If that's where it went, I'll never get it because I'm too far out of Eutelsat 115 West B's foot print.

See here: http://www.eutelsat.com/en/satellites/E ... rages.html
by Yankee495
Tue Apr 25, 2017 8:52 pm
Forum: Softcam :Biss/PowerVu/Tandberg
Topic: powervu keys
Replies: 104
Views: 24407

Re: powervu keys

I used to get 139 west AMC8 4080v 30000 but I think it wasn't encrypted. I can't get it now no matter what I do. Does it take keys now? Yes, you need keys now. Thanks iq180 but now it's totally dead. No signal at all. I read that the radio stations are moving off of AMC8 to AMC 18 and I'm scanning ...
by Yankee495
Sat Apr 22, 2017 2:17 pm
Forum: Softcam :Biss/PowerVu/Tandberg
Topic: powervu keys
Replies: 104
Views: 24407

Re: powervu keys

I used to get 139 west AMC8 4080v 30000 but I think it wasn't encrypted. I can't get it now no matter what I do.

Does it take keys now?
by Yankee495
Fri Mar 17, 2017 5:45 am
Forum: Freesat & GTMedia V8
Topic: DiSEqC 1.2 positions
Replies: 4
Views: 2085

Re: DiSEqC 1.2 positions

Wow Owen, I get it. I know about hex and hex editing and see what you did there. It should be able to do 256 positions with two characters of storage space, from 00 to FF hex. I would think you can't use more than the two character hex entry and 256 would be plenty! If the firmware file is too diffi...
by Yankee495
Fri Feb 17, 2017 11:01 pm
Forum: Freesat & GTMedia V8
Topic: V8 Finder enjoy
Replies: 7
Views: 2938

Re: V8 Finder enjoy

Fantastic! I'll be getting one of these!
by Yankee495
Fri Feb 17, 2017 10:52 pm
Forum: Freesat & GTMedia V8
Topic: Freesat V8 super getting stuck and quick changing
Replies: 2
Views: 1315

Re: Freesat V8 super getting stuck and quick changing

Yes, I'm getting total box freeze ups if I change channels real fast by holding down the channel button. It has happened two times in a week. I think it may depend on what satellite you're on because sometimes I can do it and it will not lock up, but I don't do it often anyway. I don't remember whic...
by Yankee495
Sun Jan 08, 2017 4:25 am
Forum: Freesat & GTMedia V8
Topic: How to Record a Specific Channel on V8 Super?
Replies: 9
Views: 2151

Re: How to Record a Specific Channel on V8 Super?

Also wondering if under DVR Config should "Time Shift" be ON or OFF? What does it do, and under Jump, there are 5 settings: 1 Min, 5 Min, 10 Min, 5 Sec, 10 Sec, and 30 Sec. What are those Jump Settings for? Any replies would be very much appreciated. Turn Time Shift ON. Time Shift is dela...
by Yankee495
Thu Dec 01, 2016 8:06 am
Forum: Freesat & GTMedia V7
Topic: Re: Firmware Update Request
Replies: 6
Views: 2728

Re: Firmware Update Request

Well, there is another reason to fix the dish taking off problem. When I go to Anik F2 to look at the guide on CityTV as soon as I hit the EPG button the dish takes off over to Decades, the last channel I was on. I can't get it to show me the EPG for CityTV. This dish moving on its own is a serious ...
by Yankee495
Wed Nov 23, 2016 6:55 am
Forum: Freesat & GTMedia V7
Topic: Upcoming V7 COMBO ATSC
Replies: 5
Views: 1956

Re: Upcoming V7 COMBO ATSC

cpr43 wrote:Hello Yankee

We have a post going on here:

viewtopic.php?f=32&t=962


Great! I didn't see it for sale though, it said 0 available but maybe it was just sold out. I'll check out your post.
by Yankee495
Wed Nov 23, 2016 6:50 am
Forum: Freesat & GTMedia V7
Topic: Upcoming V7 COMBO ATSC
Replies: 5
Views: 1956

Re: Upcoming V7 COMBO ATSC

dhj wrote:Being a V8 owner I don't usually check the V7 forum so I just happened on this. Surprised its V7, thought V8 was the latest models.


Me too, I would've assumed it'd be a V8. I'm looking forward to more specifications on it so I can compare it to a V8.
by Yankee495
Thu Nov 17, 2016 11:54 am
Forum: Freesat & GTMedia V8
Topic: chipset of freesat
Replies: 1
Views: 1302

Re: chipset of freesat

I think I read the V8 specifications somewhere but I forgot where so I am not sure about the V8 but the V7 uses a Montage SOC.

Montage M88CS6001-U Dual-Core SoC with built-in demodulator
64MB of DDR2-1066 SDRAM
4MB Flash Memory

Maybe a Freesat will post it here for us. I'm curious to know also.
by Yankee495
Thu Nov 17, 2016 11:00 am
Forum: Freesat & GTMedia V7
Topic: Upcoming V7 COMBO ATSC
Replies: 5
Views: 1956

Upcoming V7 COMBO ATSC

Hello everyone, I just noticed that there is a new V7 satellite receiver with a built in ATSC tuner over on freesat.cc I assume this is has the same specifications as the V7 HD but with an added ATSC tuner. This is perfect for turning a computer monitor into a television with all of your channels on...
by Yankee495
Sun Nov 13, 2016 5:36 am
Forum: GTMedia OTT Box
Topic: Here is how to Upgrade S905X
Replies: 4
Views: 2039

Re: Here is how to Upgrade S905X

Yankee495 It works for me. It also did the update without erasing anything from my setting. Thank you very much!! You're welcome. I didn't lose my settings either. I love this box already (THANK YOU Mr Fang)!!! I did find a bug when pairing a Bluetooh keyboard. It has two settings apps and both pop...
by Yankee495
Sun Nov 13, 2016 5:15 am
Forum: GTMedia OTT Box
Topic: Here is how to Upgrade S905X
Replies: 4
Views: 2039

Re: Here is how to Upgrade S905X

Hello, thanks for your service...but how can you say ithere is no problem' ? Are you the development ? Do you use a rotor using usals for the positionning ? As it is impossible to put longitude and latitude in the usals screen, the rotor cannot work. It is ok if you only use one satellite but NOT w...
by Yankee495
Fri Nov 11, 2016 2:00 am
Forum: GTMedia OTT Box
Topic: Here is how to Upgrade S905X
Replies: 4
Views: 2039

Here is how to Upgrade S905X

First, you need to download the new Firmware from here: http://freesat.cn/forum/viewtopic.php?f=41&t=487&sid=3961c1fcad5835dc8d84c2c2bd507aea Copy that Zip file to a USB stick just as it is, do NOT unzip it. Next go to Apps then click "Update & Backup". Under "Update Local...
by Yankee495
Fri Oct 28, 2016 11:12 pm
Forum: GTMedia OTT Box
Topic: S905X Update
Replies: 4
Views: 2112

Re: S905X Update

I downloaded the update but I didn't find instructions in it. I think my S905X is on the way and should be here soon. As usual I'll go through it and learn everything I can about it and post what I find. It looks like a very cool media box with amazing specs. I bet it'll stream SAT2IP from a V8 Supe...
by Yankee495
Thu Oct 27, 2016 9:57 pm
Forum: Freesat & GTMedia V8
Topic: New DB Editor Tool Released
Replies: 1
Views: 1094

New DB Editor Tool Released

New DB Editor Tool Released In case you missed it the new DB Editor tool (Satellite/Channel/Favorites editor) has been released. I've been checking it out and it seems to be a very good upgrade of features and I haven't had any problems with it. It has a new "All Favorites" list like "...
by Yankee495
Mon Oct 24, 2016 8:28 am
Forum: Freesat & GTMedia V8
Topic: No Chinese shit anymore
Replies: 9
Views: 2642

Re: No Chinese shit anymore

You have to scan some channels before it will exit the menu because there is no where to exit to. Set up a satellite, scan a channel and hit exit. And, the Chinese are building a lot of things these days so you better throw that iPhone out the car window! By the way, sell the car, it has Chinese cra...
by Yankee495
Mon Oct 24, 2016 8:23 am
Forum: Freesat & GTMedia V8
Topic: Building Network For Sat2IP
Replies: 15
Views: 4669

Re: Building Network For Sat2IP

There seems to be some confusion about staying in the SAT2IP menu, you do not have to stay in it. And yes, the TV will stay on one channel while the computer views another, if they are on the same TP. I have V8 crashes if I use wifi with the newest FW and I had a little trouble with the older FW but...
by Yankee495
Fri Oct 21, 2016 7:40 pm
Forum: Freesat & GTMedia V8
Topic: Building Network For Sat2IP
Replies: 15
Views: 4669

Re: Building Network For Sat2IP

Ok, I connected the V8 by wifi to my Cisco AP, it's wireless N and I used the 2.4 GHz radio. I could not find the connection speed because I am just learning Cisco IOS. I don't think it has any throttling going on, but again, I'll have to look up and learn how to check. According to the Web Interfac...
by Yankee495
Fri Oct 21, 2016 6:19 pm
Forum: Freesat & GTMedia V8
Topic: Building Network For Sat2IP
Replies: 15
Views: 4669

Re: Building Network For Sat2IP

Great, your network is set up good. I have a wireless N access point too but have not tried it since I upgraded my network. I am using it wired right now but let me see how it works on the wifi. I'll look at my AP settings too, there may be settings in there that need turned on for Multicast . You m...
by Yankee495
Fri Oct 21, 2016 5:15 pm
Forum: Freesat & GTMedia V8
Topic: Building Network For Sat2IP
Replies: 15
Views: 4669

Re: Building Network For Sat2IP

OFF: Trying to find a software that can acts like a relay of SAT2IP server. My idea is the Software connects with STB with SAT2IP protocol and enconde audio/video (on the fly) to another file format (bitrates, codec, etc). I think its the best way to share SAT2IP over internet because uPNP cant wor...
by Yankee495
Fri Oct 21, 2016 4:35 pm
Forum: Freesat & GTMedia V8
Topic: Building Network For Sat2IP
Replies: 15
Views: 4669

Re: Building Network For Sat2IP

Yes, exactaly, Sorry i didnt understand well when you asked. I dont know if STB will support this. maybe a hardware limit. if you learn a way please let us know :D About my SAT2IP problems: I think its a "Network Discover" from windows is crashing SAT2IP. when i turn on box and turn on sa...

Go to advanced search