BISS code in a specific channel
Moderators: admin, GTMedia Team
-
- Posts: 8
- Joined: Wed Feb 06, 2019 5:17 pm
BISS code in a specific channel
Hi, someone knows how to activate the BISS code of a specific channel, I have a channel with its BISS code, I add the code to the biss in key edit, but then the channel does not desemcrypta remains in black, as I have to say to the channel that activates the code that I have put in key edit, thanks...
Re: BISS code in a specific channel
Can you let us members know what channel you wish to decode, on what sat plus any other details. If any member has this channel and have the codes that work they can PM this info to you.
Den
Den
-
- Posts: 8
- Joined: Wed Feb 06, 2019 5:17 pm
Re: BISS code in a specific channel
It is an occasional channel, it is a signal that I transmit occasionally and I need to see its download, I put the biss code, I have a more "professional" receiver that desemcripta, and I'm sure the gtmedia will do it but not how it is done.
Re: BISS code in a specific channel
Need to know a few specific parameters about this feed in order to be able to test it. Without these parameters your key is useless.
Re: BISS code in a specific channel
While you in the channel press
Menu
Network
Right Arrow
Type 6666
Go to Biss
Press ADD boton
It will pop up channel info
Download to the Key section and enter your key for channel
Menu
Network
Right Arrow
Type 6666
Go to Biss
Press ADD boton
It will pop up channel info
Download to the Key section and enter your key for channel
Re: BISS code in a specific channel
Hi,
That specific channel might be transmitting biss flag off.
So, you must add encryption flag to that channel use by GTMediaDBeditor to change your userDBbackup
"IS_Scramble : 0 ---> 1" , restore userDBbackup file,
Maybe Biss working.
Good luck
That specific channel might be transmitting biss flag off.
So, you must add encryption flag to that channel use by GTMediaDBeditor to change your userDBbackup
"IS_Scramble : 0 ---> 1" , restore userDBbackup file,
Maybe Biss working.
Good luck
-
- Posts: 8
- Joined: Wed Feb 06, 2019 5:17 pm
Re: BISS code in a specific channel
Thank you very much first for your collaboration, in a week I return to transmit the signal and try again to add the biss code when the channel is transmitting, thanks.