Understanding softcam export files

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

Post Reply
silverado5150
Posts: 3
Joined: Thu Nov 08, 2018 6:05 pm

Understanding softcam export files

Post by silverado5150 »

When viewing the softcam after export, how is the provider ID assigned to a particular channel? I read where the sat and TP can be entered after the key data but what about the ones already decoded by the V7?

When there are hundreds of them, it's unclear which is which.

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: Understanding softcam export files

Post by cpr43 »

Unfortunally there is no way to tell.

Jordannascimento
Posts: 12
Joined: Tue Apr 17, 2018 12:35 am

Re: Understanding softcam export files

Post by Jordannascimento »

Gostaria de saber como editar a SC, e como ela funciona alguém poderia me esclarecer?

Astron888
Posts: 60
Joined: Wed Oct 17, 2018 4:33 pm

Re: Understanding softcam export files

Post by Astron888 »

Jordannascimento wrote:Gostaria de saber como editar a SC, e como ela funciona alguém poderia me esclarecer?
Olá Jordannascimento,estou também com a mesma dúvida como isso funciona,porque estava indo tudo bem mas depois da ultima actualização ficou tudo complicado.

Jordannascimento
Posts: 12
Joined: Tue Apr 17, 2018 12:35 am

Re: Understanding softcam export files

Post by Jordannascimento »

Astron888 wrote:
Jordannascimento wrote:Gostaria de saber como editar a SC, e como ela funciona alguém poderia me esclarecer?
Olá Jordannascimento,estou também com a mesma dúvida como isso funciona,porque estava indo tudo bem mas depois da ultima actualização ficou tudo complicado.
O seu ja funcionou com SC ASTRON888? O meu ainda não consegui fazer funcionar através de , somente com card :roll: ouvi falar que Sc pega em HD não sei se procede
Last edited by Jordannascimento on Tue Nov 13, 2018 5:56 pm, edited 1 time in total.

User avatar
Feralkiwi
网站管理员
Posts: 8341
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Understanding softcam export files

Post by Feralkiwi »

silverado5150 wrote:When viewing the softcam after export, how is the provider ID assigned to a particular channel? I read where the sat and TP can be entered after the key data but what about the ones already decoded by the V7?

When there are hundreds of them, it's unclear which is which.
If you go to the conditional access / key edit / CW and then press "Add" from the channel you want data for, you will see the numbers for that channel in the entry page.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Astron888
Posts: 60
Joined: Wed Oct 17, 2018 4:33 pm

Re: Understanding softcam export files

Post by Astron888 »

Jordannascimento wrote:
Astron888 wrote:
Jordannascimento wrote:Gostaria de saber como editar a SC, e como ela funciona alguém poderia me esclarecer?
Olá Jordannascimento,estou também com a mesma dúvida como isso funciona,porque estava indo tudo bem mas depois da ultima actualização ficou tudo complicado.
O seu ja funcionou com SC ASTRON888? O meu ainda não consegui fazer funcionar através de , somente com card :roll: ouvi falar que Sc pega em HD não sei se procede
Ainda não,por isso que não confirmo e gostaria mesmo de entender melhor o seu funcionamento

Jordannascimento
Posts: 12
Joined: Tue Apr 17, 2018 12:35 am

Re: Understanding softcam export files

Post by Jordannascimento »

Astron888 wrote:
Jordannascimento wrote:
Astron888 wrote:
Jordannascimento wrote:Gostaria de saber como editar a SC, e como ela funciona alguém poderia me esclarecer?
Olá Jordannascimento,estou também com a mesma dúvida como isso funciona,porque estava indo tudo bem mas depois da ultima actualização ficou tudo complicado.
O seu ja funcionou com SC ASTRON888? O meu ainda não consegui fazer funcionar através de , somente com card :roll: ouvi falar que Sc pega em HD não sei se procede
Ainda não,por isso que não confirmo e gostaria mesmo de entender melhor o seu funcionamento
estou na mesma condição que você cara, aqui só pegou o Card mas não consegui colocar o SC pra rodar

Astron888
Posts: 60
Joined: Wed Oct 17, 2018 4:33 pm

Re: Understanding softcam export files

Post by Astron888 »

Jordannascimento wrote:
Astron888 wrote:
Jordannascimento wrote:
Astron888 wrote:
Jordannascimento wrote:Gostaria de saber como editar a SC, e como ela funciona alguém poderia me esclarecer?
Olá Jordannascimento,estou também com a mesma dúvida como isso funciona,porque estava indo tudo bem mas depois da ultima actualização ficou tudo complicado.
O seu ja funcionou com SC ASTRON888? O meu ainda não consegui fazer funcionar através de , somente com card :roll: ouvi falar que Sc pega em HD não sei se procede
Ainda não,por isso que não confirmo e gostaria mesmo de entender melhor o seu funcionamento
estou na mesma condição que você cara, aqui só pegou o Card mas não consegui colocar o SC pra rodar
Melhor esperar alguma ajuda cara

silverado5150
Posts: 3
Joined: Thu Nov 08, 2018 6:05 pm

Re: Understanding softcam export files

Post by silverado5150 »

When there are hundreds of them, it's unclear which is which.[/quote]
If you go to the conditional access / key edit / CW and then press "Add" from the channel you want data for, you will see the numbers for that channel in the entry page.

Owen[/quote]

Interesting information, however my V7 doesn't have any CW menu categories listed. It's still running the factory FW it came with. It works fine so I saw no reason to update anything. Thanks. Perhaps this information can help others.

dr21
Posts: 12
Joined: Sat Nov 24, 2018 7:25 pm

Re: Understanding softcam export files

Post by dr21 »

I doubt factory firmware would have any SC code in it. You'd need to update firmware first.

Post Reply

Return to “GTMEDIA V7 SERIES”