Page 1 of 2
Freesat V7 Firmware 2018.11.19
Posted: Tue Nov 20, 2018 9:08 am
by Nettomo
Freesat V7 Firmware 2018.11.19
Hallo,
leider stürzt auch diese Firmware ewig ab.
"CCcam"
Besonders schlimm ist es von zb. Astra - "Vivid" und "Hustler TV",
schalte ich von "tagesschau24" auf "Brazzers TV" ist sofot Ende.
Getestet auf 2 Freesat V7 HD Geräten.
--------------------
Freesat V7 Firmware 2018.11.19
Hello,
unfortunately, this firmware crashes forever.
"CCcam"
It is particularly bad of zb. Astra - "Vivid" and "Hustler TV",
I switch from "tagesschau24" to "Brazzers TV" is over immediately.
Tested on 2 Freesat V7 HD devices.
greeting Uwe
Re: Freesat V7 Firmware 2018.11.19
Posted: Tue Nov 20, 2018 11:27 am
by Nettomo
Hi xuromi,
das stimmt nicht,
die Firmware vom 2018.08.03 läuft mit CCcam besser.
----------------------
Hi xuromi,
that's not true,
the firmware from 2018.08.03 runs better with CCcam.
greeting Uwe
Re: Freesat V7 Firmware 2018.11.19
Posted: Tue Nov 20, 2018 11:31 am
by Nettomo
Ich schrieb es bereits hier:
viewtopic.php?f=32&t=10435
-------------------------------------
I already wrote it here:
viewtopic.php?f=32&t=10435
Re: Freesat V7 Firmware 2018.11.19
Posted: Tue Nov 20, 2018 12:26 pm
by Nettomo
So habe nun das FREESAT_V7_HD_20180803 wieder installiert,
mit CCcam läuft alles stabiel.
-------------------------------
So have now reinstalled the FREESAT_V7_HD_20180803,
everything is stable with CCcam.
Re: Freesat V7 Firmware 2018.11.19
Posted: Tue Nov 20, 2018 1:08 pm
by Nettomo
Hi xuromi,
ich kann natürlich nur von Deutschen Servern reden
------------------
Hi xuromi,
Of course I can only speak about German servers
Re: Freesat V7 Firmware 2018.11.19
Posted: Tue Nov 20, 2018 2:37 pm
by gigano
Hallo,
leider stürzt auch diese Firmware ewig ab. habe der alte software von 3.8.2018 geladen und habe keine problem mehr.
Re: Freesat V7 Firmware 2018.11.19
Posted: Tue Nov 20, 2018 7:15 pm
by Feralkiwi
xuromi wrote:Do not call me a liar. I've tried all the firms since May of this year. The result, same problem in those channels. That is, in my case, I have seen that problem in all the firms. If you do well, it will be the clines that you use, it is not a problem of the firm.
A lot of the Ccam problems are from the ISP Modem box blocking your Ccam access to the net.
Other users using other ISP's will get different results than you do.
See this
discussion re IPTV blocking by ISP JAZZTEL.
Owen
Re: Freesat V7 Firmware 2018.11.19
Posted: Wed Nov 21, 2018 8:53 am
by Nettomo
Hallo,
ich muß "mikelsat" zustimmen:
Es ist bei mir immer die selbe FritzBox,
die selbe CCcam-Line und die selben Freesat V7 Geräte.
"Jedoch habe ich immer die Aktuelle Firmware aufgespielt."
Die Freesat Geräte habe ich für Freunde je nach bedarf eingerichtet,
jedoch kann ich einmal die Geräte Freesat V8 Super,Golden ausprobieren.
------------------------------------------
Hello,
I have to agree with "mikelsat":
It is always the same FritzBox with me,
the same CCcam-Line and the same Freesat V7 devices.
"However, I have always uploaded the latest firmware."
The freesat devices I have set up for friends as needed,
However, I can try the devices Freesat V8 Super, Golden.
greeting Uwe
Re: Freesat V7 Firmware 2018.11.19
Posted: Wed Nov 21, 2018 12:47 pm
by Nettomo
Update:
Ich habe nun V8 Super, Golden(Sat) getestet,
beide Geräte stürzen(reboot) genauso ab wie der Freesat V7 HD.
Dieses zb. passiert wenn CCcam zwischen den verschiedenen verschlüsselungen umschaltet.
Mit der Firmware vom 03.08.2018 läuft CCcam.
----------------- Google translation -----------------
I have now tested V8 Super, Golden(Sat),
Both devices crash (reboot) as well as the Freesat V7 HD.
This zb. happens when CCcam switches between the different encryptions.
With the firmware from 03.08.2018 runs CCcam.
greeting Uwe
Re: Freesat V7 Firmware 2018.11.19
Posted: Wed Nov 21, 2018 3:50 pm
by tasimans
Please repair YouTube search!!! Don,t work long ago!
Re: Freesat V7 Firmware 2018.11.19
Posted: Wed Nov 21, 2018 5:20 pm
by gigano
Wie bei mir, V8 Super, V8 Golde, V7 Combo, V7 HD, V7S alle stürtzen ab.
Re: Freesat V7 Firmware 2018.11.19
Posted: Wed Nov 21, 2018 5:49 pm
by Nettomo
Hi gigano,
für die Geräte Freesat V7 HD V8 Super/Golden,
rate ich di zu der Firmware vom 03.08.2018.
Die läuft mit CCcam an stabilsten.
Gruß Uwe
PS: PM
Re: Freesat V7S
Posted: Wed Nov 21, 2018 7:57 pm
by thom lungu
mr owen how to add biss keys to freesat v7s please
Re: Freesat V7 Firmware 2018.11.19
Posted: Wed Nov 21, 2018 8:22 pm
by Juan
Nettomo wrote:Freesat V7 Firmware 2018.11.19
Hallo,
leider stürzt auch diese Firmware ewig ab.
"CCcam"
Besonders schlimm ist es von zb. Astra - "Vivid" und "Hustler TV",
schalte ich von "tagesschau24" auf "Brazzers TV" ist sofot Ende.
Getestet auf 2 Freesat V7 HD Geräten.
--------------------
Freesat V7 Firmware 2018.11.19
Hello,
unfortunately, this firmware crashes forever.
"CCcam"
It is particularly bad of zb. Astra - "Vivid" and "Hustler TV",
I switch from "tagesschau24" to "Brazzers TV" is over immediately.
Tested on 2 Freesat V7 HD devices.
greeting Uwe
Re: Freesat V7 Firmware 2018.11.19
Posted: Wed Nov 21, 2018 8:38 pm
by STRETCH
Go to MENU / NETWORK press OK, Type 6666 / then go to KEY EDIT press OK.
Then action the keys to the section that you require
Den
Re: Freesat V7 Firmware 2018.11.19
Posted: Wed Nov 21, 2018 9:04 pm
by spok2010
This version changed nothing. 65 W and 75 W continues off and 34.5 W (MTN) too. At last, what changed?
Re: Freesat V7 Firmware 2018.11.19
Posted: Thu Nov 22, 2018 8:53 am
by Nettomo
Es ist doch Fakt,
das im Moment viele Freesat Geräte die selben Probleme haben.
Gruß Uwe
----------------- Google translation -----------------
It's a fact
that at the moment many Freesat devices have the same problems.
greetings Uwe
Re: Freesat V7 Firmware 2018.11.19
Posted: Fri Nov 23, 2018 2:16 am
by Rogivan
spok2010 wrote:This version changed nothing. 65 W and 75 W continues off and 34.5 W (MTN) too. At last, what changed?
a bobosat já implantou o has mode 25 enquanto na atualização foi colocado o 21 e 22 tá muito atras
Re: Freesat V7 Firmware 2018.11.19
Posted: Sun Nov 25, 2018 10:26 am
by rafael_aroldo
xuromi wrote:lo que he notado en esta versión es que donde antes ponia señal y calidad ahora pone: S y Q.
Eso por qué es?
Falha de tradução. Em espanhol: Calidad; em inglês: Quality; em português: Qualidade.
Q
No freesatV7HD não ocorreu essa falha.
Re: Freesat V7 Firmware 2018.11.19
Posted: Sun Nov 25, 2018 2:41 pm
by rafael_aroldo
xuromi wrote:Jaja. Eso ya lo se compañero. Antes salía palabra completa.
No se por qué tocan lo que ya está bien. Y lo que sigue mal no lo arreglan.
Aunque esto para mi es una chorrada siempre que no afecte al rendimiento.
Hahaha. Faltou em portunhol. Não sei qual seria...
Re: Freesat V7 Firmware 2018.11.19
Posted: Tue Nov 27, 2018 8:25 pm
by Rajabuhamisi
Gt media pleas help as on 68.5 Ten spots to open on freesat V7 hd
Re: Freesat V7 Firmware 2018.11.19
Posted: Tue Nov 27, 2018 8:55 pm
by STRETCH
TEN SPORTS, on this satellite are in Encryption (IRDETO 2 / CONAX ) which is NOT supported.
Den
Re: Freesat V7 Firmware 2018.11.19
Posted: Sat Dec 08, 2018 9:16 pm
by Nettomo
Hallo Owen,
wird denn in der nächsten Firmware das "CCcam" Problem behoben sein ?
Gruß Uwe
----------------- Google translation -----------------
Hello Owen,
will be fixed in the next firmware, the "CCcam" problem?
greetings Uwe
Re: Freesat V7 Firmware 2018.11.19
Posted: Sat Dec 08, 2018 9:30 pm
by Feralkiwi
Nettomo wrote:Hallo Owen,
wird denn in der nächsten Firmware das "CCcam" Problem behoben sein ?
Gruß Uwe
----------------- Google translation -----------------
Hello Owen,
will be fixed in the next firmware, the "CCcam" problem?
greetings Uwe
I do not know. I am a user of Freesat like you.
I see these new softwares on the site as you do.
One question: Is the Ccam service for 12515, that blocks, a PayTV providers service or a hack?
Owen
Re: Freesat V7 Firmware 2018.11.19
Posted: Sun Dec 09, 2018 9:49 am
by Nettomo
Hallo Owen,
das wußte ich nicht, der Avatar lässt andees vermuten.
Ich verstehe die Frage nicht.
-> Post 1
Gruß Uwe
----------------- Google translation -----------------
Hello Owen,
I did not know that, the avatar suggests otherwise.
I do not understand the question.
--> Post 1
greetings Uwe