GT MEDIA V7S BLOQUEADO

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

Post Reply
Jaisoneljaduecortina
Posts: 4
Joined: Fri Nov 30, 2018 2:57 pm

GT MEDIA V7S BLOQUEADO

Post by Jaisoneljaduecortina »

Buenos días tengo un v7s bloqueado en la pantalla tiene un mensaje FUP9 que puedo hacer para solucionar este problema gracias de antemano...

Mimoc
Posts: 35
Joined: Wed Aug 22, 2018 10:57 am

Re: GT MEDIA V7S BLOQUEADO

Post by Mimoc »

prueba a descargar el ultimo firmware, renombrarlo a flash.bin y ponerlo en un pendrive y desenchufar y enchufar el deco y presionar repetidamente la tecla menu, deberia de actualizartelo y solucionar el problema.

Jaisoneljaduecortina
Posts: 4
Joined: Fri Nov 30, 2018 2:57 pm

Re: GT MEDIA V7S BLOQUEADO

Post by Jaisoneljaduecortina »

Ya lo he hecho con muchos Bin y nada no hace nada!!!

Durete
Posts: 24
Joined: Sat Dec 08, 2018 2:27 am
Location: Madrid

Re: GT MEDIA V7S BLOQUEADO

Post by Durete »

Jaisoneljaduecortina wrote:Ya lo he hecho con muchos Bin y nada no hace nada!!!
Quita la antena WiFi.
Yo probé a actualizar con flash.bin y solo funcionó cuando quité la antena WiFi
GTmedia V7S, V8 Nova and V9 Super.

User avatar
Feralkiwi
网站管理员
Posts: 8342
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: GT MEDIA V7S BLOQUEADO

Post by Feralkiwi »

flash.bin recovery is done like this.

Place a copy of the unpacked software (the .bin file) on a USB stick and rename it "flash.bin"
With the USB in the unit, power on while repeat pressing "Menu" on the remote. You must use the V7 remote on the V7.
The unit should reload the software.

Also other users say that you must use a USB stick, not a card holder etc and that stick must be 32Gb or under.

I have had units that will not recover.
Try using the same software as was in the unit when it crashed, not the new update software.
You must use the correct software, iV7HD for the V7HD etc, not software for any other freesat units.

Try even older software as the file for flash.bin.

Look at the LED in the USB stick. When the TV shows the message "USB Upgrade, do not turn off" you should see the LED on the USB flash as the file is loaded.
The USB LED should also flash a few times as the unit first powers on and looks at it.
Also users have said to use the rear USB port for this on V8 units.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Pepe Jose
Posts: 10
Joined: Mon Mar 18, 2019 4:32 am

Re: GT MEDIA V7S BLOQUEADO

Post by Pepe Jose »

cuando decimos renombrar como se hace gracias y un saludo

rumenaguer
Posts: 11
Joined: Wed Mar 27, 2019 11:50 am

Re: GT MEDIA V7S BLOQUEADO

Post by rumenaguer »

Pepe Jose wrote:cuando decimos renombrar como se hace gracias y un saludo
Directamente desde Windows coges el fichero, botón derecho del ratón y le cambias el nombre a flash.bin.

Yo lo estoy probando y lo raro es que lleva unos cuantos minutos, no sé si habrá quedado colgado durante la upgrade o bien está haciendo algo ya que mi USB no tiene led de actividad.

Os voy contando si me ha funcionado o no

rumenaguer
Posts: 11
Joined: Wed Mar 27, 2019 11:50 am

Re: GT MEDIA V7S BLOQUEADO

Post by rumenaguer »

No me funcionó el downgrade, todo y que aparecía el mensaje de "USB Upgrade, don't power off" se quedó más de 20 minutos fijo sin hacer nada.

Finalmente me la jugué apagándolo, pero arrancó sin problemas por lo que finalmente lo dejé en la versión que estaba. Esperaré a futuras versiones de firmware para actualizarlo y ver que tal.

jewel
Posts: 16
Joined: Thu Mar 28, 2019 11:32 pm

Re: GT MEDIA V7S BLOQUEADO

Post by jewel »

tambien hay que ver que algunas veces no es necesario actualizar el sw, solamente cuando ya no tenemos mayoria de canales y corremos el riesgo de que el stb se bloquea. pero eso depende de cada cual...
Antena 3mt banda-c Veracruz Mexico.

Post Reply

Return to “GTMEDIA V7 SERIES”