BISS code in a specific channel

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

Post Reply
miguelbetis
Posts: 8
Joined: Wed Feb 06, 2019 5:17 pm

BISS code in a specific channel

Post by miguelbetis »

Hi, someone knows how to activate the BISS code of a specific channel, I have a channel with its BISS code, I add the code to the biss in key edit, but then the channel does not desemcrypta remains in black, as I have to say to the channel that activates the code that I have put in key edit, thanks...

STRETCH
Posts: 3642
Joined: Mon Jan 09, 2017 2:31 pm
Location: West Midlands UK

Re: BISS code in a specific channel

Post by STRETCH »

Can you let us members know what channel you wish to decode, on what sat plus any other details. If any member has this channel and have the codes that work they can PM this info to you.

Den

miguelbetis
Posts: 8
Joined: Wed Feb 06, 2019 5:17 pm

Re: BISS code in a specific channel

Post by miguelbetis »

It is an occasional channel, it is a signal that I transmit occasionally and I need to see its download, I put the biss code, I have a more "professional" receiver that desemcripta, and I'm sure the gtmedia will do it but not how it is done.

moltar
Posts: 67
Joined: Fri Dec 28, 2018 5:10 am

Re: BISS code in a specific channel

Post by moltar »

Need to know a few specific parameters about this feed in order to be able to test it. Without these parameters your key is useless.

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: BISS code in a specific channel

Post by cpr43 »

While you in the channel press

Menu

Network

Right Arrow

Type 6666

Go to Biss

Press ADD boton

It will pop up channel info

Download to the Key section and enter your key for channel

User avatar
Xsat
Posts: 463
Joined: Wed Sep 14, 2016 4:52 am

Re: BISS code in a specific channel

Post by Xsat »

Hi,

That specific channel might be transmitting biss flag off.
So, you must add encryption flag to that channel use by GTMediaDBeditor to change your userDBbackup
"IS_Scramble : 0 ---> 1" , restore userDBbackup file,
Maybe Biss working. :)

Good luck

miguelbetis
Posts: 8
Joined: Wed Feb 06, 2019 5:17 pm

Re: BISS code in a specific channel

Post by miguelbetis »

Thank you very much first for your collaboration, in a week I return to transmit the signal and try again to add the biss code when the channel is transmitting, thanks.

Post Reply

Return to “GTMEDIA V7 SERIES”