GTMEDIA Forum

Hello all,

1st post , I read and read ..flashed the latest software to my freesat V7,put in several PowerVu keys manually and tried the soft cam.key method, but I have had no success even getting one power view channel to unencrypt.

Does this work for the PowerVu channels in the USA?

Thanks for any info and reading my post.

Onzz

Yes.......

Hey thanks for the reply sickboy, would you mind sharing some keys that work apparently mine are out dated ? For example some PowerzVu channels on satellite Galaxy 17 at 91.0°W

Fox Networks Group
3820 V 30000
ECMkey0: CB 56 53 EF 16 A1 2B
ECMkey1: FE 52 82 5F B0 76 A5
P 00 22 B7 9A 00 97 66 7E 82 AC 07 76 , EMM KEY

Maybe Im entering them wrong..^^^ how should these be put in?


this is how it looks in my softcam.key file

P 1a2b3c4d 00 909DD8F17BCFA7;2590:03980:30000:H ;
P 1a2b3c4d 01 b18fc4a6ac0859;2590:03980:30000:h ;
P 1a2b3c4d 00 cb5653ef16a12b;2690:3820:30000:v ;
P 1a2b3c4d 01 fe52825fb076a5;2690:3820:30000:v ;
B 0002 11769:13734:H cw:ab 11 70 2c 21 37 11 69 ;

#*#*#*#*#*#*#*#*#*#*# Auto ECM Key #*#*#*#*#*#*#*#*#*#*#



Thanks for any info

P 0000 00 CB5653EF16A12B;2690:03820:30000:V ;
P 0000 01 FE52825FB076A5;2690:03820:30000:V ;

Toomanyreceivers you did it !!!

I erased what I had, copy and pasted what you shared to my soft cam.key and it came on!! Man I really appreciate you helping me. I guess I have to learn how to get the right keys and to correctly enter them in the right sequence.

Thank you VERY much!

Yeah,i had probs at first,manually entering keys.
But once u get the hang of it,no biggie.
Main thing is get the right Sat ID Number that goes after key.They are actually ini files for pc sat cards that use # to identify the diff Sats.

skideric wrote:Yeah,i had probs at first,manually entering keys.
But once u get the hang of it,no biggie.
Main thing is get the right Sat ID Number that goes after key.They are actually ini files for pc sat cards that use # to identify the diff Sats.

Thanks for the reply man. will definately keep your info in mind,

Ive been messing around trying to get:

Galaxy 17 & Nimiq 6 at 91.0°W 3751 H 14410-5/6
Comcast SportsNet Chicago
P 0000 00 FA9E7BFBE2EACE ; ECM Key0
P 0000 01 FD9A43FA2C41F6 ; ECM Key1
P 005A7884 00 48B78F6A5DBB69 ; EMM Key
-----------------------------------------------------------------
this is how I entered them

P 0000 00 FA9E7BFBE2EACE;2690:03751:14410:H ;
P 0000 01 FD9A43FA2C41F6;2690:03751:14410:H ;




and

Galaxy 17 @ 91°W (C-band)
4100 V 30000 5/6 – DVB-S2/8PSK MPEG-4/HDTV
Channels: Root Sports Package
ECMKEY0=7D5A641589C5BB
ECMKEY1=80572C14D31CE3

---------------------------------------------------------

P 0000 00 7D5A641589C5BB;2690:04100:30000:V ;
P 0000 01 80572C14D31CE3;2690:04100:30000:V ;



They are now working !!!
Thanks for the replies
again , very much appreciated to all

Hi again , can anyone verify if these are working keys @ the moment?


SES 1 & DirecTV 4S/8 at 101.0°W

4020 H 28000-3/4

key 00 5BB685E40EAABD ; ECM Key0
key 01 96D71BE6B2F98F ; ECM Key1


well I don't know they don't work for me, and the V7 hd will not crack them....also does anyone have the PW keys for frequency 3900 H 30000 AMC 11 at 131.0°W

Thanks for any info!

bumppppppppppp

Have a look at my instructions here on powervu codes.
The format is the same for the V7 as it is in the V8. You can swap softcam.key files between the two types, v7 and V8.
Note that if you have older software that does not have the new Constant CW, the file does not "Import" the CW and when you "Export" the softcam.key file it over writes the existing one and you could loose you Constant Cw codes on your USB.

Owen

Owen thanks for the reply , yep I thoroughly went through your post last week when I was trying to figure it out for myself. I have the key format entered correctly. I used the soft cam.key procedure. Some work some don't , thats why I asked about those specific keys , IF anyone else is having success with them. I have the newest software for the V7HD version (21/02/2017)

One thing I can't understand, is why does this receiver crack some PowerVu channels but not others? It's all powerVu....strange

Thanks again for the reply.

Onzz wrote:One thing I can't understand, is why does this receiver crack some PowerVu channels but not others? It's all powerVu....strange

The Pay TV providers are fighting back.
Some Powervu is now Powervu+, like the channels on ABS 6 and MTN.
MTN was changing their code VERY often before they went PV+.
Other channels like A F N only add the flags that Freesat use to Auto Roll the codes once or twice an hour.
CNN off Isat19 @166e will auto roll on the V8 but not the V7.
NHK left powervu and went to a more secure encryption.

Enjoy what you can get while it lasts.

Owen

Oh ok,

Its hard for me to relate because Im on the western sats and it looks as you are more parked on the eastern ones.

All the channels my freesat, that I was referring to, can't crack are said to be regular PowerVu , not powerVu + as stated on lyngsat.com

Like the NESN ones from 3900 H 30000 AMC 11 at 131.0°W

Thanks Owen for your info, it is much appreciated

Onzz wrote:One thing I can't understand, is why does this receiver crack some PowerVu channels but not others? It's all powerVu....strange

It's not strange.

There are two types of keys; ecm and emm keys. In your second post you can see both kinds.

To get video you must have a working ecm key for that channel. To get a working ecm key someone must give it to you OR you need a valid emm key. The emm key reveals the working ecm keys and so are more valuable as you don't have to rely on someone to give you the ecm keys because the receiver uses the emm key to get them.

The firmware has some emm keys embedded in the firmware, ie you won't see them by dumping the softcam.key to usb. If you are on a channel with a valid emm key the video will come on after a variable amount of time. You would have to ask someone who knows which transponders have keys embedded or you will wait all day and still not get video.

sickboy wrote:

Onzz wrote:One thing I can't understand, is why does this receiver crack some PowerVu channels but not others? It's all powerVu....strange

It's not strange.

There are two types of keys; ecm and emm keys. In your second post you can see both kinds.

To get video you must have a working ecm key for that channel. To get a working ecm key someone must give it to you OR you need a valid emm key. The emm key reveals the working ecm keys and so are more valuable as you don't have to rely on someone to give you the ecm keys because the receiver uses the emm key to get them.

The firmware has some emm keys embedded in the firmware, ie you won't see them by dumping the softcam.key to usb. If you are on a channel with a valid emm key the video will come on after a variable amount of time. You would have to ask someone who knows which transponders have keys embedded or you will wait all day and still not get video.

Thanks alot for the info

I'm in East Africa having the same problem. A F N on 906e never opens.
Patched my V7 combo with several updates with no success . Manual and auto keys never
worked

A F N auto rolls the key only once or twice an hour.
It use to do this at 23 minutes past the hour but has changed again.
Some hours I do not get the code and others I do.

I leave the TV on A F N when I leave the room and hope it finds the code.

Owen

On SES 1 do a blind rescann and there are more channels cmt music and other channels added and the keys did roll

rockforu2 wrote:On SES 1 do a blind rescann and there are more channels cmt music and other channels added and the keys did roll

How about 4020 H 28000 SES 1, any luck with that?

sickboy wrote:

Onzz wrote:One thing I can't understand, is why does this receiver crack some PowerVu channels but not others? It's all powerVu....strange

It's not strange.

There are two types of keys; ecm and emm keys. In your second post you can see both kinds.

To get video you must have a working ecm key for that channel. To get a working ecm key someone must give it to you OR you need a valid emm key. The emm key reveals the working ecm keys and so are more valuable as you don't have to rely on someone to give you the ecm keys because the receiver uses the emm key to get them.

The firmware has some emm keys embedded in the firmware, ie you won't see them by dumping the softcam.key to usb. If you are on a channel with a valid emm key the video will come on after a variable amount of time. You would have to ask someone who knows which transponders have keys embedded or you will wait all day and still not get video.

Thanks for the info sick boy, that clears it up for me a bit

PowerVu works in South America???