Freesat V7 Max new firmware(07/03/2017)
Moderators: admin, GTMedia Team
Freesat V7 Max new firmware(07/03/2017)
7/03/2017
1) Disable smartcard support!
---the last fw enable smartcard support but the box don't support it.Sorry!
FREESAT_V7_MAX_20170307.rar
download/file.php?id=796&sid=98e046c44d ... 7578929821
1) Disable smartcard support!
---the last fw enable smartcard support but the box don't support it.Sorry!
FREESAT_V7_MAX_20170307.rar
download/file.php?id=796&sid=98e046c44d ... 7578929821
Last edited by Feralkiwi on Wed Mar 08, 2017 9:00 am, edited 1 time in total.
Reason: Repaired link to software.
Reason: Repaired link to software.
FREESAT brand change GT MEDlA
Re: Freesat V7 Max new firmware(07/03/2017)
Freezing problem solved, thank you engineers! thank you Freesat Team!
Re: Freesat V7 Max new firmware(07/03/2017)
V7 MAX software use problems ?
FREESAT brand change GT MEDlA
Re: Freesat V7 Max new firmware(07/03/2017)
Whice version is it? V3............ Many Thanks.
Re: Freesat V7 Max new firmware(07/03/2017)
gin wrote:Whice version is it? S/W V3............ Many Thanks.
Re: Freesat V7 Max new firmware(07/03/2017)
Yes, please promptly solve this problem "Please Wait, Moving Dish", it keeps on repeating.Lining wrote:V7 MAX software use problems ?
Before when OK is pressed this message will be gone but this 07/03/2017 new version is very annoying because the more OK you press the more this message will pop up. Worst still, this message will stay when the destination channel has no signal!
I think you people did not try out the software before release, very unique one you know? All satellite installers have rejected it.
Re: Freesat V7 Max new firmware(07/03/2017)
I also noticed this annoying problem. The same problem is also with the V7HD.
Re: Freesat V7 Max new firmware(07/03/2017)
In the menu go to "System" then "Other" then set "Device pop message" to "Off"
This stops the pop up messages being displayed.
I can not test the March software as I do not have a V7 Max here.
Owen
This stops the pop up messages being displayed.
I can not test the March software as I do not have a V7 Max here.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat V7 Max new firmware(07/03/2017)
We know this function but then when the STB is upstair and the positioner is downstair how do we know whether the dish is moving if it is disabled? Don't forget this V7 MAX has RF output to remote TV.
A problem is a problem and it must be solved, so better let the engineers aware of it rather than just stop here.
A problem is a problem and it must be solved, so better let the engineers aware of it rather than just stop here.
- Attachments
-
- moving dish.jpg (117.52 KiB) Viewed 7127 times
-
- Posts: 13
- Joined: Mon Feb 27, 2017 5:41 pm
Re: Freesat V7 Max new firmware(07/03/2017)
Lining wrote:7/03/2017
1) Disable smartcard support!
---the last fw enable smartcard support but the box don't support it.Sorry!
FREESAT_V7_MAX_20170307.rar
download/file.php?id=796&sid=94fc2c4343 ... 7166eaf790
Helloo
subtitles fixed ?
Subtitles txt working ?
Thanks
Re: Freesat V7 Max new firmware(07/03/2017)
YESgoodog wrote:We know this function but then when the STB is upstair and the positioner is downstair how do we know whether the dish is moving if it is disabled? Don't forget this V7 MAX has RF output to remote TV.
A problem is a problem and it must be solved, so better let the engineers aware of it rather than just stop here.
I checked this with my V7HD and the latest software.
The pop up message "Moving Dish Please wait" will repeatedly come up when a "No Signal" channel is selected.
This pops up so quickly that you can not change channel because you need to press "OK" to clear the "Moving dish" message and after you press "OK" the message pops up again very quickly before you can change channel.
This is due to the DiSEcQ commands being resent again and again for ever and each time the DiSEqC command is sent the move command is sent and the POP up message "Moving Dish" appears AGAIN.
There were changes made to the DiSEcQ commands in the V8 range that gave the option for repeat sending or no repeat sending of DiSEqC commands.
Th V7's do not have this, not that that would stop this pop up massage.
Engineers: There is a problem here, when DiSEqC move is active, with repeat pop up message "Moving Dish", when a "No Siganl" channel is selected. This makes it hard to change the channel away from the "No Signal" channel. Latest software Version 21 02 2017.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat V7 Max new firmware(07/03/2017)
Feralkiwi wrote:YESgoodog wrote:We know this function but then when the STB is upstair and the positioner is downstair how do we know whether the dish is moving if it is disabled? Don't forget this V7 MAX has RF output to remote TV.
A problem is a problem and it must be solved, so better let the engineers aware of it rather than just stop here.
I checked this with my V7HD and the latest software.
The pop up message "Moving Dish Please wait" will repeatedly come up when a "No Signal" channel is selected.
This pops up so quickly that you can not change channel because you need to press "OK" to clear the "Moving dish" message and after you press "OK" the message pops up again very quickly before you can change channel.
This is due to the DiSEcQ commands being resent again and again for ever and each time the DiSEqC command is sent the move command is sent and the POP up message "Moving Dish" appears AGAIN.
There were changes made to the DiSEcQ commands in the V8 range that gave the option for repeat sending or no repeat sending of DiSEqC commands.
Th V7's do not have this, not that that would stop this pop up massage.
Engineers: There is a problem here, when DiSEqC move is active, with repeat pop up message "Moving Dish", when a "No Siganl" channel is selected. This makes it hard to change the channel away from the "No Signal" channel. Latest software Version 21 02 2017.
Owen
Thank you very much for your support, we have been concerned about this problem! Update firmware fix!
FREESAT brand change GT MEDlA
Re: Freesat V7 Max new firmware(07/03/2017)
Freezing problem solved in this receiver, now I can use 4 clines with cccam
hope this problem is solved soon in the other receivers like the V7 HD and V8 Super
hope this problem is solved soon in the other receivers like the V7 HD and V8 Super
Re: Freesat V7 Max new firmware(07/03/2017)
Hi!
I've now upgraded to this version. I had a much older version.
So, I upgraded with the all code mode and now some of my HD channels don't work, and when they do work we can only hear sound and other times we can only see picture and no sound. This changes have happen whenever I turn the box off and then on again. This only in the HD channels. The others works fine. Someone can help me? Thanks
I've now upgraded to this version. I had a much older version.
So, I upgraded with the all code mode and now some of my HD channels don't work, and when they do work we can only hear sound and other times we can only see picture and no sound. This changes have happen whenever I turn the box off and then on again. This only in the HD channels. The others works fine. Someone can help me? Thanks