Freesat V7 HD Beeper!

[lunatic211]

Please someone explain BEEPER option on Freesat V7 HD.
Menu > System > Other > Beeper

[cpr43]

Use to aim your dish. It will make a sound when you lock the signal

[lunatic211]

Use to aim your dish. It will make a sound when you lock the signal

not working!!!!

S/W V3.02.102.486
H/W V2.1.0

[elanimal19]

a mi tampoco me funciona el beeper en mi freesat V7 HD

[Bolaojpa]

Beep does not work there are several updates ago.

[pegasus07]

Do you go to Menue - Instakation - Sat list - select your Satellit - move dish to right position with a simple signalmeter.
Now the beeper would have to tackle and you can fine tune it. But I do not know if the beeper signal necessarily indicates the right satellite. With my satellite measuring device, I can store 4 of the most important transponders per satellite and thereby recognize the right satellite.

My meter has two LED strips. The red LEDs indicate if any satellite was found and its signal strength. The green LEDs are for fine tuning and indicate the quality of the logged-in transponder data. In addition, my beeper signal reacts very well even with the smallest deviations. Beeper-starts also only the transponder have logged in.

Best regards pegasus07