Freesat V7HD new firmware(21/04/2017) (Error)

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

joetv
Posts: 69
Joined: Fri Apr 21, 2017 10:35 pm

Freesat V7HD new firmware(21/04/2017) (Error)

Post by joetv »

Freesat V7HD new firmware(21/04/2017) still having the same problem with this frmware as i was having with the last one
when i go to a satellite to scan or just change channels i get (moving dish please wait) even when
the dish gets to where it needs to be and stops message stays on for a while cant get rid of it
so i have to down grade to s/w- v2.24.100.404 11-22-2016 a/w- v2.10 10-17-2016
then everything works fine just dont have constat key feature just wondering if any anyone else is having the same problem and when can it be fixed.
its a pain to downgrade with a rs232 cable and old pc everytime to get it back to normal

Thanks for any help

Akacheebe
Posts: 145
Joined: Mon Jan 02, 2017 4:01 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by Akacheebe »

So there is a version of this V7HD firmware that DOES NOT have the "Moving Dish" crap like what's in the post link below?

viewtopic.php?f=32&t=1502

I've been waiting for MONTHS for them to fix this crap, but all they seem to work on is making sure there's plenty of porn available??? :roll:

joetv
Posts: 69
Joined: Fri Apr 21, 2017 10:35 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by joetv »

I went back to this one don"t have this problem with it

model- freesat v7 hd (p)
s/w- v2.24.100.404 11-22-2016
a/w- v2.10 10-17-2016
this is a older software but stable
this software doesnt have constant key feature but works
if that helps any
Last edited by joetv on Wed May 03, 2017 9:12 am, edited 2 times in total.

Akacheebe
Posts: 145
Joined: Mon Jan 02, 2017 4:01 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by Akacheebe »

There is a 11/15/2016 firmware listed in the V7HD download section but NO 11/22/2016? Type "O" or did that firmware get deleted? :roll:

Also, this one is on your list but I don't know what it is a/w- v2.10 10-17-2016 ? Only thing I've used is the regular s/w .bin file for the upgrades I've installed?

Thanks

User avatar
IPTVKid
Posts: 106
Joined: Sat Sep 17, 2016 2:31 am
Location: Isla del Espanto

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by IPTVKid »

Out of curiosity, do you have a motorized dish and is giving you this message of moving dish? Or you don't have motorized dish and getting this message?
I am testing V7HD, V7 Max and V8 Super with 9 working LNBs with 8x1 Diseq switch and 1 22KHz Tone switch, I change channel from channel to 1 sat to the other never got that message, that is why I ask if you have motorized system ...
V8 NOVA, GTC, GLOBO HD405, FreeSat V8 Super, V7, V7 Max
There is no way to peace, peace is the way......

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by Feralkiwi »

IPTVKid wrote:Out of curiosity, do you have a motorized dish and is giving you this message of moving dish? Or you don't have motorized dish and getting this message?
I am testing V7HD, V7 Max and V8 Super with 9 working LNBs with 8x1 Diseq switch and 1 22KHz Tone switch, I change channel from channel to 1 sat to the other never got that message, that is why I ask if you have motorized system ...
Yes if you select "DiSEqC or "USALS" in the mover option of the antenna page you get that message when you change channel to that satellite.
With out that selected you do not see the message.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
IPTVKid
Posts: 106
Joined: Sat Sep 17, 2016 2:31 am
Location: Isla del Espanto

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by IPTVKid »

Feralkiwi wrote:
IPTVKid wrote:Out of curiosity, do you have a motorized dish and is giving you this message of moving dish? Or you don't have motorized dish and getting this message?
I am testing V7HD, V7 Max and V8 Super with 9 working LNBs with 8x1 Diseq switch and 1 22KHz Tone switch, I change channel from channel to 1 sat to the other never got that message, that is why I ask if you have motorized system ...
Yes if you select "DiSEqC or "USALS" in the mover option of the antenna page you get that message when you change channel to that satellite.
With out that selected you do not see the message.

Owen
I am guessing the problem is because move dish is enable on a non motorized set up, because I have that same receiver and 2 more FreeSat V7 Max and V8 Super and today I upgarded the 3 receivers with firmware 4_21_2017 and I don't get that message.
V8 NOVA, GTC, GLOBO HD405, FreeSat V8 Super, V7, V7 Max
There is no way to peace, peace is the way......

laranjito
Posts: 7
Joined: Thu Oct 06, 2016 5:25 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by laranjito »

Olá
Já algum tempo desde que houve Mudanças na MEO este recetor deixou de dar os canais do bouquet e só dá mesmo os canais da zon.
Esperei até aparecer este novo firmwear e não resolveu a situação,será que estarei a fazer algo de errado? O que sei é que a mesma linha e com a mesma cccam funciona noutro recetor dando tudo,agradecia a alguem que me ajude se possivel a resolver a situação. obrigados

Akacheebe
Posts: 145
Joined: Mon Jan 02, 2017 4:01 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by Akacheebe »

IPTVKid wrote:Out of curiosity, do you have a motorized dish and is giving you this message of moving dish? Or you don't have motorized dish and getting this message?
I am testing V7HD, V7 Max and V8 Super with 9 working LNBs with 8x1 Diseq switch and 1 22KHz Tone switch, I change channel from channel to 1 sat to the other never got that message, that is why I ask if you have motorized system ...
Don't know if you were asking me for these details or not but yes, I have a 10ft Cband Motorized Dish which is controlled by DiseqC 1.2 using a Vbox II dish mover that is already programmed with all the sat locations I use. And note here that I have 3 different receivers I've used with this system with NO problems except for this V7 junk.

When I go into the Satellite Setup menu and setup motor control then try to "edit" ANYTHING in that Satellite Setup menu the the damn moving dish crap pops up ad nauseam ANYTIME I try to change from one satellite to another, ie, if I need to move up 5 satellites to edit, then the damn V7HD tries to move to every damn satellite location BEFORE it will go to the 5th one that I want to be on. It starts and stops and starts and stops and I just want to take a freaking sledge hammer to the damn receiver!! In fact, I'm amazed that it's still in one piece!

So that's why I just disabled ANY DISH CONTROL by the receiver and have to use the Vbox II remote to move the dish.

Does that explain it?

Ferialkiwi is aware of this as he's complained about it also in the thread I started months ago.

Akacheebe
Posts: 145
Joined: Mon Jan 02, 2017 4:01 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by Akacheebe »

Akacheebe wrote:There is a 11/15/2016 firmware listed in the V7HD download section but NO 11/22/2016? Type "O" or did that firmware get deleted? :roll:

Also, this one is on your list but I don't know what it is a/w- v2.10 10-17-2016 ? Only thing I've used is the regular s/w .bin file for the upgrades I've installed?

Thanks
So does anyone know if there was actually an 11/22/2016 firmware for a V7HD or not??

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by Feralkiwi »

Akacheebe wrote:So does anyone know if there was actually an 11/22/2016 firmware for a V7HD or not??
I downloaded and kept the files as they were posted and NO I did not see any for 11/22/2016.
Here is part of the log file for FREESAT_V7_HD_20161208 It shows nothing for 11/22
log file from 12/08/2016 wrote: Change List:
--------------------------------------------------
08/12/2016
1) scroll the long channel name
2) generated powervu key for 121.00W-3982-V-29269
thanks GADAPH BUSHAGAMA help to catch the channel data .
3) modify the Thai epg problem
4) the db tool don't show correctly FAV group name when dumped only channel list

--------------------------------------------------
15/11/2016
1) generated the last Tandberg key
2) support 113C the xcrypt channel by softcam key
---- Thanks Hengky send the TS file and key for testing.

--------------------------------------------------
31/08/2016
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
IPTVKid
Posts: 106
Joined: Sat Sep 17, 2016 2:31 am
Location: Isla del Espanto

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by IPTVKid »

Akacheebe wrote:
IPTVKid wrote:Out of curiosity, do you have a motorized dish and is giving you this message of moving dish? Or you don't have motorized dish and getting this message?
I am testing V7HD, V7 Max and V8 Super with 9 working LNBs with 8x1 Diseq switch and 1 22KHz Tone switch, I change channel from channel to 1 sat to the other never got that message, that is why I ask if you have motorized system ...
Don't know if you were asking me for these details or not but yes, I have a 10ft Cband Motorized Dish which is controlled by DiseqC 1.2 using a Vbox II dish mover that is already programmed with all the sat locations I use. And note here that I have 3 different receivers I've used with this system with NO problems except for this V7 junk.

When I go into the Satellite Setup menu and setup motor control then try to "edit" ANYTHING in that Satellite Setup menu the the damn moving dish crap pops up ad nauseam ANYTIME I try to change from one satellite to another, ie, if I need to move up 5 satellites to edit, then the damn V7HD tries to move to every damn satellite location BEFORE it will go to the 5th one that I want to be on. It starts and stops and starts and stops and I just want to take a freaking sledge hammer to the damn receiver!! In fact, I'm amazed that it's still in one piece!

So that's why I just disabled ANY DISH CONTROL by the receiver and have to use the Vbox II remote to move the dish.

Does that explain it?

Ferialkiwi is aware of this as he's complained about it also in the thread I started months ago.
The reason I ask is to be sure if there was a motorized dish or not, because my neighbor had a similar problem without having a motorized dish and every time he changed a channel the message appeared, and it was a setting enable that needed to be disable.
Now, since I know you do have a motorized system I can look how to help you.
I remember the first OpenBox S10 having similar problems it took 3 software to finally fixed the problem.
Now we need Team FreeSat to focus in this problem, it should only move the dish when user wants to move it.
V8 NOVA, GTC, GLOBO HD405, FreeSat V8 Super, V7, V7 Max
There is no way to peace, peace is the way......

sickboy
Posts: 188
Joined: Fri Oct 28, 2016 7:15 am

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by sickboy »

There is a setting to disable the "nag" about moving the dish however the dish still moves as before.

joetv
Posts: 69
Joined: Fri Apr 21, 2017 10:35 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by joetv »

would post firmware but gives me Invalid file extension

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by Feralkiwi »

joetv wrote:would post firmware but gives me Invalid file extension
You can up load it in a ".zip" file.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

sickboy
Posts: 188
Joined: Fri Oct 28, 2016 7:15 am

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by sickboy »

bumisat88 wrote:Regarding V7 "Moving Dish, Please Wait" problem, they explained it this way, agree or not?

Translation:

Hey, I have sold half of my stock have you solve the moving dish issue?

I have shown this problem to software engineer, now why this happened, just because you have connected to a motor, no signal this message will always pop up.

Before no matter got signal or not this pop up message will be gone when OK button is pressed.

According to the engineer's logic this is wrong, whenever there is no signal detected the message must pop up.

I have been discussing with him how to solve this problem
Send the engineer to the forum here so he can understand it. Might be a translation problem but it looks like you and him are talking about two different error messages.

840
Posts: 91
Joined: Tue Apr 18, 2017 1:25 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by 840 »

thank Sickboy i went to other setting and turned off the device POP Message and now there is no moving dish Message.thats on the V8 super.

840
Posts: 91
Joined: Tue Apr 18, 2017 1:25 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by 840 »

you guys go to the satellite list and uncheck the box and see if that will work.

User avatar
Lining
网站管理员
Posts: 1169
Joined: Thu Aug 11, 2016 11:14 am

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by Lining »

joetv wrote:Freesat V7HD new firmware(21/04/2017) still having the same problem with this frmware as i was having with the last one
when i go to a satellite to scan or just change channels i get (moving dish please wait) even when
the dish gets to where it needs to be and stops message stays on for a while cant get rid of it
so i have to down grade to s/w- v2.24.100.404 11-22-2016 a/w- v2.10 10-17-2016
then everything works fine just dont have constat key feature just wondering if any anyone else is having the same problem and when can it be fixed.
its a pain to downgrade with a rs232 cable and old pc everytime to get it back to normal

Thanks for any help

Hello
1. Tips, move the disk please wait .... problem, sorry, to bring you inconvenience, we have been trying to solve!
2. When there is no signal, prompt, move the disk please wait ....., if there is a signal lock prompt will disappear.
3. Try to set up the system ----- other ----- set POP to OFF. The prompt message is turned off.

2.jpg
2.jpg (90.36 KiB) Viewed 10785 times
FREESAT brand change GT MEDlA

sickboy
Posts: 188
Joined: Fri Oct 28, 2016 7:15 am

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by sickboy »

Lining wrote:Hello
1. Tips, move the disk please wait .... problem, sorry, to bring you inconvenience, we have been trying to solve!
Lining, there have been many, many posts asking that this be looked at it would have been helpful for you to acknowledge earlier that you were at least trying to fix it. Still it's good news.

But it cannot be that difficult to fix - perhaps you and the software engineers don't have motorized dishes ? Please ask here if you need clarification.

bumisat88
Posts: 99
Joined: Fri Aug 12, 2016 6:28 am

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by bumisat88 »

Post that is "NOT NICE TO HEAR" will be removed, so be cautious!

sickboy
Posts: 188
Joined: Fri Oct 28, 2016 7:15 am

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by sickboy »

If offering help like countless others in this forum have offered to do to help squash software bugs is "Not nice to hear" then the problem is all yours and not mine.

joetv
Posts: 69
Joined: Fri Apr 21, 2017 10:35 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by joetv »

Thanks for telling me how to post software
heres a picture of software in my receiver cant post software
shows keys

Akacheebe
Posts: 145
Joined: Mon Jan 02, 2017 4:01 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by Akacheebe »

Eliminating the popup message is only part of the problem. I need the damn dish to stop moving also until I WANT it to move and switching between satellites I don't need it to start moving until I get to the ONE I want to go to, not stop and start with every damn one I have to go through to get where I want to go!! That crap is hard on both dish motors and dish controller relays!!

Example: When I go from 139W tp 95W I have to up arrow the entire list one at a time from 139 to 95 and the dish tries to move on EVERY SATELLITE IN BETWEEN. What we need is to be able to arrow up from 139 to 95, THEN press the OK button and THEN have the dish move to 95w!!

840
Posts: 91
Joined: Tue Apr 18, 2017 1:25 pm

Re: Freesat V7HD new firmware(21/04/2017) (Error)

Post by 840 »

my V8 super did that till I went to satellite List and un checked all the satellites then it worked Fine.

Post Reply

Return to “GTMEDIA V7 SERIES”