Question about V7Pro DiSEqC
Posted: Mon Dec 07, 2020 2:35 am
Regarding the V7Pro DiSEqC problem, we can discuss and solve it together
GTMEDIA technical support forum Email: support@gtmedia.cc Web:www.gtmedia.cc
https://www.freesat.cn/forum/
Hello,
There are a very small number of V7Pro unit that DiSEqC does not work on.lmmm wrote: ↑Wed Dec 09, 2020 3:35 pm@Linin
@cpr43
Saludos, soy nuevo con equipo V7 Pro.
Realice el factory reset luego la actualización correcta GTMedia_V7Pro_Release_20201127.bin y después otro factory reset, verifique menu-Install- Satellite List-Installation el LNB Power en ON y la configuración esta correcta.
Parábola bien orientada y satélite bien configurado, el Finder (buscador) si detecta intensidad y calidad de señal, puedo ver canales con el DISEqC 1.1.
Pero me acabo de dar cuenta que el V7 Pro no. Si retiro el DISEqC 1.1 y conecto directo del LNB si funciona, realice la prueba con dos satélites diferentes.
también realicé la prueba a 1.6 ft con cables coaxiales cortos y el V7 Pro no funciona con diseqc 1.1
Asistencia por favor.
Feralkiwi wrote: ↑Wed Dec 09, 2020 7:42 pmThere are a very small number of V7Pro unit that DiSEqC does not work on.lmmm wrote: ↑Wed Dec 09, 2020 3:35 pm@Linin
@cpr43
Saludos, soy nuevo con equipo V7 Pro.
Realice el factory reset luego la actualización correcta GTMedia_V7Pro_Release_20201127.bin y después otro factory reset, verifique menu-Install- Satellite List-Installation el LNB Power en ON y la configuración esta correcta.
Parábola bien orientada y satélite bien configurado, el Finder (buscador) si detecta intensidad y calidad de señal, puedo ver canales con el DISEqC 1.1.
Pero me acabo de dar cuenta que el V7 Pro no. Si retiro el DISEqC 1.1 y conecto directo del LNB si funciona, realice la prueba con dos satélites diferentes.
también realicé la prueba a 1.6 ft con cables coaxiales cortos y el V7 Pro no funciona con diseqc 1.1
Asistencia por favor.
GT Media are working on this.
there are some freezes on the powervu channels on the V7 PRO
Owen
You can directly send me a private message, or send an email to me, or add Skype Whats App to communicate with us, check the V7Pro DiSEqC problem you mentionedlmmm wrote: ↑Wed Dec 09, 2020 3:35 pm@Linin
@cpr43
Saludos, soy nuevo con equipo V7 Pro.
Realice el factory reset luego la actualización correcta GTMedia_V7Pro_Release_20201127.bin y después otro factory reset, verifique menu-Install- Satellite List-Installation el LNB Power en ON y la configuración esta correcta.
Parábola bien orientada y satélite bien configurado, el Finder (buscador) si detecta intensidad y calidad de señal, puedo ver canales con el DISEqC 1.1.
Pero me acabo de dar cuenta que el V7 Pro no. Si retiro el DISEqC 1.1 y conecto directo del LNB si funciona, realice la prueba con dos satélites diferentes.
también realicé la prueba a 1.6 ft con cables coaxiales cortos y el V7 Pro no funciona con diseqc 1.1
Asistencia por favor.
Yes that is a known issue with a small number of units of the V7Pro, including mine.Alexsat wrote: ↑Thu Dec 17, 2020 11:29 pmit seems that the administrators of this forum are beginners or do not want to understand something that is simple and obvious to understand, because the V7 PRO does not recognize the DISEqC 1.1 key, it does not signal, it is not able to search for channels.
You have to develop an update that solves the problem of disecq 1.1 or the GTMedia_V7PRO will be useless and will be forgotten forever.Lining wrote: ↑Mon Dec 14, 2020 1:41 amYou can directly send me a private message, or send an email to me, or add Skype Whats App to communicate with us, check the V7Pro DiSEqC problem you mentionedlmmm wrote: ↑Wed Dec 09, 2020 3:35 pm@Linin
@cpr43
Saludos, soy nuevo con equipo V7 Pro.
Realice el factory reset luego la actualización correcta GTMedia_V7Pro_Release_20201127.bin y después otro factory reset, verifique menu-Install- Satellite List-Installation el LNB Power en ON y la configuración esta correcta.
Parábola bien orientada y satélite bien configurado, el Finder (buscador) si detecta intensidad y calidad de señal, puedo ver canales con el DISEqC 1.1.
Pero me acabo de dar cuenta que el V7 Pro no. Si retiro el DISEqC 1.1 y conecto directo del LNB si funciona, realice la prueba con dos satélites diferentes.
también realicé la prueba a 1.6 ft con cables coaxiales cortos y el V7 Pro no funciona con diseqc 1.1
Asistencia por favor.
Another failure product in DiSEqC has added to the list. For example the V7 Plus which will move the dish unexpectedly every time in cold start and this problem until today remain unsolved. This new one worst still the dish won't move at all LOL.Alexsat wrote: ↑Mon Jan 04, 2021 1:41 pmYou have to develop an update that solves the problem of disecq 1.1 or the GTMedia_V7PRO will be useless and will be forgotten forever.Lining wrote: ↑Mon Dec 14, 2020 1:41 amYou can directly send me a private message, or send an email to me, or add Skype Whats App to communicate with us, check the V7Pro DiSEqC problem you mentionedlmmm wrote: ↑Wed Dec 09, 2020 3:35 pm@Linin
@cpr43
Saludos, soy nuevo con equipo V7 Pro.
Realice el factory reset luego la actualización correcta GTMedia_V7Pro_Release_20201127.bin y después otro factory reset, verifique menu-Install- Satellite List-Installation el LNB Power en ON y la configuración esta correcta.
Parábola bien orientada y satélite bien configurado, el Finder (buscador) si detecta intensidad y calidad de señal, puedo ver canales con el DISEqC 1.1.
Pero me acabo de dar cuenta que el V7 Pro no. Si retiro el DISEqC 1.1 y conecto directo del LNB si funciona, realice la prueba con dos satélites diferentes.
también realicé la prueba a 1.6 ft con cables coaxiales cortos y el V7 Pro no funciona con diseqc 1.1
Asistencia por favor.
I'm not sure the problem can be solved with the new firmware. If the diseqc problem is only on a small number of receivers then there can't be problem with software bug. In the case of a software bug, all receivers won't work, not just a small number. Maybe I'm wrong? I'm not an expert, I'm just thinking ...
That is what I want to say. Software is not problem. Some part of receivers have hardware problems and diseqc is not working. That's my opinion...STRETCH wrote: ↑Wed Jan 06, 2021 9:56 amI have got two of the said receivers, one set up for USALS, the other DISEQ 1.1.
I have not had any issues with my receivers, with the USALS receiver my satellites range from 45e to 30w, Diseq 1.1 satellites which are six with a 8 way diseq switch. The software on both receivers are V242 23 Dec 2020.
Den
Re the universal LNB.sasa-22 wrote: ↑Wed Jan 06, 2021 10:27 am
That is what I want to say. Software is not problem. Some part of receivers have hardware problems and diseqc is not working. That's my opinion...
I can only catch one satellite and the other satellites are not working. And only when I put the universal LNB (5150-11475). Other settings of the universal LNB do not work that satellite either. On the old enigma 2 receiver all satellites work great with the same settings. So, antenna system is OK, problem is in receiver.
V7Pro DiSEqC has updated the firmware. If you need to test the firmware, you can privately message me
V7Pro DiSEqC has updated the firmware. If you need to test the firmware, you can privately message meFeralkiwi wrote: ↑Wed Jan 06, 2021 8:43 pmRe the universal LNB.sasa-22 wrote: ↑Wed Jan 06, 2021 10:27 am
That is what I want to say. Software is not problem. Some part of receivers have hardware problems and diseqc is not working. That's my opinion...
I can only catch one satellite and the other satellites are not working. And only when I put the universal LNB (5150-11475). Other settings of the universal LNB do not work that satellite either. On the old enigma 2 receiver all satellites work great with the same settings. So, antenna system is OK, problem is in receiver.
I too found the unit behaved differently with a universal or 22kHz "ON" settings.
I see a multi pulse DiSEqC command is sent with 22kHz on. I have not yet found what this is. It is not any DiSEqC switch command and may be a motor command.
Only a DiSEqC 1.0 port one command is sent on other settings.
Did your dish move with the universal LNB setting?
I think that the issue is these few units are using the old user file format with the new format in the memory.
The 22kHz "ON" is then setting a "Bit" for another command as per the older positions for the command bits.
This is where I intend to test.
Christmas / New year have been busy for me. I hope to have time for testing this in the next few days.
Owen
Edtied:
More here on this issue.
V7Pro DiSEqC has updated the firmware. If you need to test the firmware, you can privately message me
V7Pro DiSEqC has updated the firmware. If you need to test the firmware, you can privately message meSTRETCH wrote: ↑Wed Jan 06, 2021 9:56 amI have got two of the said receivers, one set up for USALS, the other DISEQ 1.1.
I have not had any issues with my receivers, with the USALS receiver my satellites range from 45e to 30w, Diseq 1.1 satellites which are six with a 8 way diseq switch. The software on both receivers are V242 23 Dec 2020.
Den