Salida de video
Moderators: admin, GTMedia Team
-
- Posts: 120
- Joined: Sat Aug 20, 2016 10:24 pm
Salida de video
Estimados un cordial saludo,depronto el freesat v7 hd tiene una falla en el diseño en la salida del video? Lo digo por que ya son tres equipos de estos que se ha malogrado la salida de video de estos equipos, la salida hdmi funciona pero salida de video no, de ser asi esta falla es reparable? Cuales serian los componentes a reemplazar? Por sus comentarios gracias, estare atento a sus comentarios
Re: Salida de video
Please note that the AV output on the V7HD needs a deep 3.5mm plug to work.Guillermoleon wrote:Estimados un cordial saludo,depronto el freesat v7 hd tiene una falla en el diseño en la salida del video? Lo digo por que ya son tres equipos de estos que se ha malogrado la salida de video de estos equipos, la salida hdmi funciona pero salida de video no, de ser asi esta falla es reparable? Cuales serian los componentes a reemplazar? Por sus comentarios gracias, estare atento a sus comentarios
Google translate:
Dear a greeting, as soon as the freesat v7 hd has a design flaw in the output of the video? I say because there are already three computers of these that have failed the video output of these computers, the hdmi output works but video output does not, so if this fault is repairable? What would be the components to replace? For your comments thank you, I will be attentive to your comments
Please look at this topic about the 3.5mm AV cable for the V7HD.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Salida de video
De hecho ya lo ví pecisamente hace un par de días, usando el cable correcto estuvo funcionando por meses, de repente dejó de funcionarla salida AV y solo la salida HDMI siguió funcionando
Re: Salida de video
Saludos, este aparato necesita digamos un cable 3.5mm especial, un poco mas largo para poder funcionar.
Re: Salida de video
Además tiene otra particularidad, el audio va por el amarillo y blanco y vídeo por el rojo.
-
- Posts: 120
- Joined: Sat Aug 20, 2016 10:24 pm
Re: Salida de video
saludos, estoy utilizando el cable original que trae el equipo, de hecho ya llevaban unos meses trabajando
Re: Salida de video
I does sound like the units AV output has failed.Guillermoleon wrote:saludos, estoy utilizando el cable original que trae el equipo, de hecho ya llevaban unos meses trabajando
Google translate:
Greetings, I am using the original cable that brings the equipment, in fact already had been working for some months
I have had AV outputs fail on my Skybox units but none on the Freesat units so far.
One possible thing is if you are using a NTSC only TV and have the AV setting set to PAL or Pal to NTSC TV.
With this kind of 3.5mm AV connector it is possible to short the outputs as you plug and unplug the cable with the unit powered on. This may have damaged it. The shorter 3.5mm plugs would leave this short on for as long as the cable is plugged in.
This is unlikely as you have used the cable that came with the units.
Another killer of electronics is earth currents like those cause by electric fences. I have had many DiSEqC switches killed by this when there are faults on the electric fence.
Similar earth currents (these are currents that flow in the ground wires of you cables) can come from other things like pumps and welders.
Power surges in electrical power supply can kill things too.
I do not know where in the world you are so these are just ideas.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 120
- Joined: Sat Aug 20, 2016 10:24 pm
Re: Salida de video
estimado estoy en colombia,ninguno de los casos anteriores, cable original ok, fuente de poder original ok, nada conectado como soldadores ,bombas de agua, motores que en el arranque pueda generar altos picos de voltage o corriente, la cuestion es que si esa falla pueda ser reparada,gracias por sus aportes