EMM keys for=131.0w=133.0w=135.0w

[dssmexicali]

Thanks in advance, i'm seeking to hit 10 posts by the way.

[Marantz]

Hi
I have a V7 max ,it works fine on powervu but took me some time with the set up
i typed the keys in manually for Powervu ,a screen shot of the V7's entry page with the keys sure would have helped ,don't forget after the keys are typed in you must reboot for them to work .
i still need to try entering autoroll keys manually sometime ,a screen shot of the data on the entry page might help.
Does the V7 max even support autoroll in North America ?
The North American Sat list sure helped out too!
Works great in North America ,6 ft dish ,dual C-KU feed ,
Hope this counts 9 more posts to go for a cam file !

[nitix007]

Do you have keys for 19.2E - 28.2E
Thanks

[Marantz]

try opentro.com for keys ,no files to download just listings to look over

[nitix007]

I found these keys here https://opentro.com/mtvu-package-cw-keys-astra-sat/
but Can you help me how to write them in softcam.key so I can import in the freesat box

[iq180]

Hi
I have a V7 max ,it works fine on powervu but took me some time with the set up
i typed the keys in manually for Powervu ,a screen shot of the V7's entry page with the keys sure would have helped ,don't forget after the keys are typed in you must reboot for them to work .
i still need to try entering autoroll keys manually sometime ,a screen shot of the data on the entry page might help.
Does the V7 max even support autoroll in North America ?
The North American Sat list sure helped out too!
Works great in North America ,6 ft dish ,dual C-KU feed ,
Hope this counts 9 more posts to go for a cam file !

You enter EMM keys the same way you do ECM keys, EMM keys only use 00 index keys, no 01 index keys are needed for EMM keys, the EMM keys are used by the receiver to find new ECM keys, the ECM keys are what opens the CHs.
Yes the V7 can use EMM keys.

[Marantz]

Thank you iq180
I will give it a try ,i see the key line is 00 and the provider Id is given,along with the key ,after the semicolin do you have to add the degrees and tp info and symbol rate with polarity or just a semicolin at the end .

i presume you add it into the regular powervu key menu however i saw something mentioned about a constant key menu .is this used too?
sorry for all the questions but there isn't really a step by step guide like what was used in the good old days on fortecs,viewsats ,coolsats ,infusions,cnx nano and others

[iq180]

Thank you iq180
I will give it a try ,i see the key line is 00 and the provider Id is given,along with the key ,after the semicolin do you have to add the degrees and tp info and symbol rate with polarity or just a semicolin at the end .

i presume you add it into the regular powervu key menu however i saw something mentioned about a constant key menu .is this used too?
sorry for all the questions but there isn't really a step by step guide like what was used in the good old days on fortecs,viewsats ,coolsats ,infusions,cnx nano and others

I you add the EMM key to the receiver it will look like this.

provid=== idx====KeyData
00123456 00 01234567891234

If you add it to the softcam key file with your computer it will look like this.

P 00123456 00 01234567891234 ;

You can add any extra info you need so you can ID the key after the semicolin

[Marantz]

iq180
Thank you for your help,
I will try adding a few auto-roll keys in manually tomorrow morning .
A few more posts and i hope i can get the file from one of the administrators

[Marantz]

HI
I have 10 posts logged , any chance of some key info for North America?

[cpr43]

HI
I have 10 posts logged , any chance of some key info for North America?

Sat/ TP info??