When scanning AMC 18 and one other satellite, the FREESAT V7 will lock up and nothing can be done until I unplug it and it boots up.
Has this happened to yours?
Thanks,
Gary
Scanning Lock Up's
Moderators: admin, GTMedia Team
Re: Scanning Lock Up's
There is over 500 Radio channels at 105W
Re: Scanning Lock Up's
Are you suggesting that scanning 500 plus channels on a single polarity's too much for the FREESAT V7 to handle? That's why it locks up or sends a message that it's full?
Thanks,
Gary
Thanks,
Gary
Re: Scanning Lock Up's
Scan lockups isn't a new problem. Look HERE and you'll see it's been around for a while now.
You can try to scan each polarity separately to see if that works. I've done that on occasion with mixed success.
You can try to scan each polarity separately to see if that works. I've done that on occasion with mixed success.
Re: Scanning Lock Up's
It's good to hear that I'm not alone with lock ups. I always scan each polarity separately.
Thank you for sharing.
Gary
Thank you for sharing.
Gary