using the RF in port of the V7 combo to receive analogue channel signal
Moderators: admin, GTMedia Team
-
- Posts: 7
- Joined: Tue Jul 25, 2017 5:12 pm
using the RF in port of the V7 combo to receive analogue channel signal
I am just wondering if you guys know how I can received an analogue RF signal from the SKY box through the RF in port of the box as I tried but when scanning for channel nothing is coming through. Basically what I want to do is connect the sky box rf output (which is analogue I beleive) to the RF input of the V7 combo and then scan for the input signal just as we do when scanning digital channel and when the signal is found, I can just use the allocated channel number if I want to record the signal that is coming through. I tried but nothing is coming through when I scan. Do you know a workaround this? Thanks
Re: using the RF in port of the V7 combo to receive analogue channel signal
The RF in is for your areal to pass through the box as the box adds an analogue channel to the RF output from the box for older TV's to view.
There is no analogue receiver in any Freesat unit.
Owen
There is no analogue receiver in any Freesat unit.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 7
- Joined: Tue Jul 25, 2017 5:12 pm
Re: using the RF in port of the V7 combo to receive analogue channel signal
O.K thanks for your reply