Newcamd protocol not working on Freesat v7 HD

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

Post Reply
pcz
Posts: 7
Joined: Thu Apr 27, 2017 9:54 am

Newcamd protocol not working on Freesat v7 HD

Post by pcz »

Hi devs.

After a few upgrade the newcand protocol not working anymore, it is showing connecting, but can't connect. With cccam it is working, but I wand to use newcamd. How can I downgrade the firmware, or are there any other solution?

Thanks

rafelingojuryu
Posts: 198
Joined: Tue Oct 03, 2017 5:11 pm

Re: Newcamd protocol not working on Freesat v7 HD

Post by rafelingojuryu »

is working fine, to me.

kroll
Posts: 121
Joined: Wed May 03, 2017 1:29 am
Location: mexico
Contact:

Re: Newcamd protocol not working on Freesat v7 HD

Post by kroll »

In my V7 newcam is working fine too with last upgrade
10 foot prime focus c band dish w/36 actuator pansat ap-3000 positioner at full arc & freesat V7,V7S2X & sg2100 motor W/ 90cms offset antenna and lnb universal KU 45º at 131º

luizaum
Posts: 66
Joined: Fri Nov 17, 2017 3:46 pm
Location: Brasil

Re: Newcamd protocol not working on Freesat v7 HD

Post by luizaum »

Newcamd working well here too, with the latest update !!

pcz
Posts: 7
Joined: Thu Apr 27, 2017 9:54 am

Re: Newcamd protocol not working on Freesat v7 HD

Post by pcz »

Hmm, well, interesting... Than what could be the problem? I have a newcam.cfg, which have the lines, it looks like:

N: serverip port user pass key

I can import it without any problem, but it is not connecting :(...

kroll
Posts: 121
Joined: Wed May 03, 2017 1:29 am
Location: mexico
Contact:

Re: Newcamd protocol not working on Freesat v7 HD

Post by kroll »

sounds like something is bad in your connection or network config
10 foot prime focus c band dish w/36 actuator pansat ap-3000 positioner at full arc & freesat V7,V7S2X & sg2100 motor W/ 90cms offset antenna and lnb universal KU 45º at 131º

Genilson
Posts: 1
Joined: Thu Nov 23, 2017 12:46 am

Re: Newcamd protocol not working on Freesat v7 HD

Post by Genilson »

O meu Freesat V7 Max depois de uma atualização parou de funcionar e ai atualizei para a ultima versão também não esta funcionando, alguém pode me ajudar ????

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Newcamd protocol not working on Freesat v7 HD

Post by Feralkiwi »

kroll wrote:sounds like something is bad in your connection or network config
You can try a flash recovery

Place a copy of the unpacked software (.bin file) on a USB stick and rename it "flash.bin"
With the usb in the unit, power on while repeat pressing "Menu". You must use the V7 remote for this.
The unit should reload the software.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

pcz
Posts: 7
Joined: Thu Apr 27, 2017 9:54 am

Re: Newcamd protocol not working on Freesat v7 HD

Post by pcz »

Finally I've found the problem! It was that in the newcamd server the key had some letters on it. When i imported the newcamd.conf, the end of the key string (where the letters were) will be missing, because in my newcamd.conf had this letters upper case. I modified my newcamd.conf and changed everything to lower case. Now it is importing without any problem, and working well!
With cccam my box had a lot of freeze :(.

Post Reply

Return to “GTMEDIA V7 SERIES”