Hi,
First, I'm sorry for my bad English.
I bought freesat V7 and I'm trying to install new firmware, but I connect USB(Formated with Fat32) with .bin inside and Freesat don't recognize usb,
I can't enter into USB Upgrade cause is not avaliable, but if I disconnect this USB appear a message "USB DISCONNECTED".
What can I do to solve this problem?
Thanks!
Regards.
Don't recognize USB
Moderators: admin, GTMedia Team
Re: Don't recognize USB
Open the file folder and left click on the firmware then send it to your USB, then it will load, the freesat can't see the firmware if it's in a folder.elnone wrote:Hi,
First, I'm sorry for my bad English.
I bought freesat V7 and I'm trying to install new firmware, but I connect USB(Formated with Fat32) with .bin inside and Freesat don't recognize usb,
I can't enter into USB Upgrade cause is not avaliable, but if I disconnect this USB appear a message "USB DISCONNECTED".
What can I do to solve this problem?
Thanks!
Regards.
Re: Don't recognize USB
I have had issues with USB's. Try unplugging and plugging in.
Second try reformatting it, save your data first.
Owen
Second try reformatting it, save your data first.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Don't recognize USB
Also some receivers don't like high capacity USBs. Try to use an old 2GB or 4GB formated in FAT32.
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Don't recognize USB
try USB stick format.