This tp-4100v is not in channel list after rescan
, so i manually added the entry and still no pictures 
, appreciate anyone know or explain pls.thkx in adv.
AsiaSat 7 4100V AsiaSat Channels
Moderators: admin, GTMedia Team
AsiaSat 7 4100V AsiaSat Channels
I've problem receiving NHK World TV channel i.e. 26:1160:1120 and wondering anyone able to tune in ?
This tp-4100v is not in channel list after rescan , so i manually added the entry and still no pictures , appreciate anyone know or explain pls.
thkx in adv.
This tp-4100v is not in channel list after rescan
, so i manually added the entry and still no pictures , appreciate anyone know or explain pls.thkx in adv.
- Attachments
-
- asiasat7.PNG (11.75 KiB) Viewed 2015 times
Re: AsiaSat 7 4100V AsiaSat Channels
That TP is a newer high rate TP. 8PSK or higher and with HD channels you need a good signal.
You need to have a very good dish and signal to get it.
I just get it with my 2.9m dish here in NZ.
If you see the TP come up when you blind scan, but it does not load channels, this means it is just below reception for your dish.
If it does not appear when you blind scan them your dish has no hope of getting it.
Adjusting your dish may improve your signal.
Owen
You need to have a very good dish and signal to get it.
I just get it with my 2.9m dish here in NZ.
If you see the TP come up when you blind scan, but it does not load channels, this means it is just below reception for your dish.
If it does not appear when you blind scan them your dish has no hope of getting it.
Adjusting your dish may improve your signal.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: AsiaSat 7 4100V AsiaSat Channels
Thk for your feedback.
I'm using 1.8m dish with c lnb in M'sia, first i doubt v7-combo not 8psk dvb-s2 std, however it's able to get similar TP setting i.e. 4180v SNP. and realize it may be the reception.
I've tried blind scan this TP and not come up, will try my luck with the dish.
Wonder reception on similar adjacent TPs e.g 4095h,4120h etc. which only a few 5~20 freq. away were Ok to receive - even 4180v no problem - why v7 sensitive in this spec range ?
Thkx in adx.
I'm using 1.8m dish with c lnb in M'sia, first i doubt v7-combo not 8psk dvb-s2 std, however it's able to get similar TP setting i.e. 4180v SNP. and realize it may be the reception.
I've tried blind scan this TP and not come up, will try my luck with the dish.
Wonder reception on similar adjacent TPs e.g 4095h,4120h etc. which only a few 5~20 freq. away were Ok to receive - even 4180v no problem - why v7 sensitive in this spec range ?
Thkx in adx.
Re: AsiaSat 7 4100V AsiaSat Channels
I find less signal for the 4100V TP than for the 4180 TP here in NZ too.
1.8m is doing well to get 4180.
Owen
1.8m is doing well to get 4180.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.