105w

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

User avatar
Bellman
网站管理员
Posts: 195
Joined: Mon Dec 18, 2017 2:13 am

105w

Post by Bellman »

Does andybody have problems with Freesat V7HD locking up during blind scaning the 105w I cant get it to do a full scan on this sat without it locking up and I have to unplug the freesat and plug it back in to regain control of the box.
Scanning the arc 43w to 139 w c/ku 11 foot dish. gt media v7hd v8 nova orange/blue v8 pro 2 v8x v8 uhd

User avatar
iq180
网站管理员
Posts: 1289
Joined: Thu Aug 11, 2016 2:55 pm

Re: 105w

Post by iq180 »

Bellman wrote:Does andybody have problems with Freesat V7HD locking up during blind scaning the 105w I cant get it to do a full scan on this sat without it locking up and I have to unplug the freesat and plug it back in to regain control of the box.
Power it off then back on then do your scan.

User avatar
Bellman
网站管理员
Posts: 195
Joined: Mon Dec 18, 2017 2:13 am

Re: 105w

Post by Bellman »

Box will not respond to just powering it off I have to just fully unplug the power cord from the box witch means when the box boots back up it does not save the channels that it scanned in before it locks up.
Scanning the arc 43w to 139 w c/ku 11 foot dish. gt media v7hd v8 nova orange/blue v8 pro 2 v8x v8 uhd

User avatar
Bellman
网站管理员
Posts: 195
Joined: Mon Dec 18, 2017 2:13 am

Re: 105w

Post by Bellman »

only thing I can do to is stop the blind scan early before it locks up then it will save the few channels it did scan in.
Scanning the arc 43w to 139 w c/ku 11 foot dish. gt media v7hd v8 nova orange/blue v8 pro 2 v8x v8 uhd

User avatar
Bellman
网站管理员
Posts: 195
Joined: Mon Dec 18, 2017 2:13 am

Re: 105w

Post by Bellman »

The 105w is the only sat that does this I think its due to all the channels that moved from the 139w awhile back the 105w has a ton of channels on it these days.
Scanning the arc 43w to 139 w c/ku 11 foot dish. gt media v7hd v8 nova orange/blue v8 pro 2 v8x v8 uhd

User avatar
juan_vale
网站管理员
Posts: 874
Joined: Wed Nov 29, 2017 5:50 am
Location: B.C.S. Mexico 24N 110W

Re: 105w

Post by juan_vale »

I get the same problem using a V8 Super. I get to a point where it shows 74% on the bargraph and just sits there, at that point it has scanned in 12 transponders and shows 93 tv channels and 153 radio stations. The last transponder shown is 4110 v 7135.

It does not freeze the box, I let it sit there for a while and cancel the scan (exit) and it asks me if I want to save, and it does save all of the information scanned up to that point. Going through the tv channels, most are scrambled, on the OSD the "?" is highlighted and the "P" never lights up, even though sound is available on some channels. So you are not alone.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: 105w

Post by cpr43 »

There were added over 500's Radio channels. You need run a blindscan for TV Channels ONLY

User avatar
Bellman
网站管理员
Posts: 195
Joined: Mon Dec 18, 2017 2:13 am

Re: 105w

Post by Bellman »

I have tried the tv channels only option that does not work either its not that big of a deal I just cancel the scan after I get close to where it desides to freeze up most of the stuff is scrambled up anyhow.
Scanning the arc 43w to 139 w c/ku 11 foot dish. gt media v7hd v8 nova orange/blue v8 pro 2 v8x v8 uhd

User avatar
juan_vale
网站管理员
Posts: 874
Joined: Wed Nov 29, 2017 5:50 am
Location: B.C.S. Mexico 24N 110W

Re: 105w

Post by juan_vale »

The channels that have audio are the Telemundo mux, which is listed in Lyngsat as a Director system. I assume they will open with Tandberg keys if available.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: 105w

Post by cpr43 »

You need to identify the Radio channels TP info and delete it from the TP section so it will not goes thru. Once the box goes thru the TP in scan mode it will hangup. It is not Freesat only but mostly all the boxes out there.

User avatar
Bellman
网站管理员
Posts: 195
Joined: Mon Dec 18, 2017 2:13 am

Re: 105w

Post by Bellman »

thanks cpr43 i will give that a try and see if that fixes the issue.
Scanning the arc 43w to 139 w c/ku 11 foot dish. gt media v7hd v8 nova orange/blue v8 pro 2 v8x v8 uhd

User avatar
Bellman
网站管理员
Posts: 195
Joined: Mon Dec 18, 2017 2:13 am

Re: 105w

Post by Bellman »

you cant beat this freesatv7hd box its a great box i dont think a hammer can break this thing lol.
Scanning the arc 43w to 139 w c/ku 11 foot dish. gt media v7hd v8 nova orange/blue v8 pro 2 v8x v8 uhd

Akacheebe
Posts: 145
Joined: Mon Jan 02, 2017 4:01 pm

Re: 105w

Post by Akacheebe »

This isn't a new problem as you can see from the link to another thread on this from last year!

viewtopic.php?f=32&t=1409

What I've done with mine is, I only use it to manually scan individual transponders not full blind scans! When I find a transponder with programming I want, I just scan that specific transponder instead of the entire satellite! That's been the only way I can use my 7HD receiver!

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: 105w

Post by Feralkiwi »

I have found that if I get repeat lock up on scanning, I delete something off my lists (a few channels or a whole sat) and the system clears something that causes the lock up, may be a large gap in the channel list that makes it think it has full memory.
I have done this many times.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Marantz
Posts: 330
Joined: Thu Dec 28, 2017 5:36 pm

Re: 105w

Post by Marantz »

I had the same problem V7 MAX ,delete all radio channels and some TV channels that are of no use to help lower the amount of memory used,i think i had to scan one TP at a time too

User avatar
Rowland
Posts: 22
Joined: Thu Dec 14, 2017 2:38 am
Location: Southwest USA

Re: 105w

Post by Rowland »

I have the same problem, and also on 103 W.

Plenty of memory... only 531 TV channels and no radio channels.

Sometimes I wonder if there is some sort of RFI directly to the south of me . 105 is my due south satellite, and I keep having lots various problems on 103, 105 and 107, yet not on any of the other satellites in my arc (78W to 127W)

901
Posts: 61
Joined: Mon Feb 05, 2018 4:31 am

Re: 105w

Post by 901 »

Bellman wrote:Does andybody have problems with Freesat V7HD locking up during blind scaning the 105w I cant get it to do a full scan on this sat without it locking up and I have to unplug the freesat and plug it back in to regain control of the box.
Happens every time I scan that satellite.

User avatar
diegosat
Posts: 126
Joined: Fri Nov 18, 2016 4:08 am

Re: 105w

Post by diegosat »

Que tal amigos ustedes que ya bajaron el satélite 105w tiene canales en español y en que encriptacion tengo en tendido que están unos en español en tandberg director abra mas espero y me puedan orientar con eso saludos.

dannykilo17
Posts: 14
Joined: Fri Feb 09, 2018 3:47 am

Re: 105w

Post by dannykilo17 »

Same problem for me also.

dannykilo17
Posts: 14
Joined: Fri Feb 09, 2018 3:47 am

Re: 105w

Post by dannykilo17 »

Can someone orient me or guide in direction on how to input tandberg keys thank you

kodi
Posts: 24
Joined: Wed Feb 14, 2018 9:25 pm

Re: 105w

Post by kodi »

diegosat wrote:Que tal amigos ustedes que ya bajaron el satélite 105w tiene canales en español y en que encriptacion tengo en tendido que están unos en español en tandberg director abra mas espero y me puedan orientar con eso saludos.
Son los telemundo. Yo ocasionalmente he podido verlos. Mayormente me ha fallado la llave.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: 105w

Post by Feralkiwi »

dannykilo17 wrote:Can someone orient me or guide in direction on how to input tandberg keys thank you
Tandberg keys look like this in your softcam.key file

It is likely that the 06D3 number is the SID.

T 06D3 01 1327C15017184800; ;
T 06C0 01 424265AB464A5400; ;
T 06D3 01 1327C15017184800; ;
T 06C0 01 424265AB464A5400; ;

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

dannykilo17
Posts: 14
Joined: Fri Feb 09, 2018 3:47 am

Re: 105w

Post by dannykilo17 »

I will try thanks

User avatar
ead
Posts: 77
Joined: Tue Feb 13, 2018 2:56 pm
Location: Arizona and Minnesota

Re: 105w

Post by ead »

juan_vale wrote:I get the same problem using a V8 Super. I get to a point where it shows 74% on the bargraph and just sits there, at that point it has scanned in 12 transponders and shows 93 tv channels and 153 radio stations. The last transponder shown is 4110 v 7135.

It does not freeze the box, I let it sit there for a while and cancel the scan (exit) and it asks me if I want to save, and it does save all of the information scanned up to that point. Going through the tv channels, most are scrambled, on the OSD the "?" is highlighted and the "P" never lights up, even though sound is available on some channels. So you are not alone.
I also have a V8 super with the exact problem on 105 west. It always stops at 4110/V/7135. I have also gone to the antenna setup and tried to scan this TP by itself with same results just stops a certain percentage and goes no further no matter how long you let it scan.
10 foot mesh dish, ASC1 positioner, V8 super

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: 105w

Post by cpr43 »

Delete the radios TPs and run a standard TV ONLY scan instead of blindscan

Post Reply

Return to “GTMEDIA V7 SERIES”