Brought a V7 Combo for DVB-T2. Able to scan the T2 signal but the playback was like freeze for 2 sec and play for 2 sec. The signal is >94% but quality between 45-60%. I tried using another TV with build-in T2 receiver using the same antenna(same antenna location) and the playback was smooth. I had flash it to the latest firmware 07/02/2018. Reside in Singapore.
Please advise if I need to change any of the setting.
Freesat V7 Combo
Moderators: admin, GTMedia Team
Re: Freesat V7 Combo
Try setting the output to NTSC or PAL instead of Auto.
Also try a different country setting before you scan the -t2 channels.
Owen
Also try a different country setting before you scan the -t2 channels.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat V7 Combo
Hi there are friends here who have sw fresat combo who can open ten 1 hd in asiasat 7 please help
Re: Freesat V7 Combo
That channel should auto roll the powervu key.Yunrif wrote:Hi there are friends here who have sw fresat combo who can open ten 1 hd in asiasat 7 please help
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.