Hello, please check your firmware and download the latest firmware.Shipped machine is old firmwarexuromi wrote:Hi.
My V7S HD work fine.
But the following happens to me, that does not happen in the v7hd:
I turn it on. Channels are well displayed. Is connected in the hdmi2. Everything ok I leave it on, and I see the TDT in TV.
If I leave it on (V7S) a few hours, when I change to hdmi2, it goes black.
Channel change in V7S, and i can see.
Does this deco have any saving mode or screensaver?
It also occurs to me that it can not be seen because the wifi is disabled. but when I change channels, it's already seen. and if I am going to check the wifi, it is activated.
Thanks
V7S HD. Black image after a few hours of use
Moderators: admin, GTMedia Team
Re: V7S HD. Black image after a few hours of use
FREESAT brand change GT MEDlA
Re: V7S HD. Black image after a few hours of use
The latest firmware HDMI has been optimized.xuromi wrote:No. I instaled last firm: 12-4-2018
http://freesat.cn/forum/viewtopic.php?f=39&t=6025
Any idea?
I have connected it to hdmi 1, to see if it fails. but do you have any idea what that could be?
FREESAT brand change GT MEDlA
Re: V7S HD. Black image after a few hours of use
My Sony smart TV used the HDMi cable to the Set Top Box to access the internet via the STB WiFi.
Could your problem be something like this?
Owen
Could your problem be something like this?
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V7S HD. Black image after a few hours of use
If you are using CCam accounts, yes it may be that your cline has disconnected and needs reconnecting before the picture is displayed.
When you change channel if the channel needs a cline it will then connect and find that cline.
Your cline account may be interrupted by your net dropping out or your cline disconnecting its service now and then.
I thought your screen was going black with a free to air channel.
Owen
When you change channel if the channel needs a cline it will then connect and find that cline.
Your cline account may be interrupted by your net dropping out or your cline disconnecting its service now and then.
I thought your screen was going black with a free to air channel.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.