UP9 boot

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

Post Reply
hugociber
Posts: 2
Joined: Wed May 23, 2018 5:58 pm

UP9 boot

Post by hugociber »

Hola.
Acabo de recibir mi Freesat V7 HD y al conectarlo al tv no aparece pantalla principal.
El tv muestra una pantalla negra con "Usb upgrade! Do not power off!"
El descodificador muestra "UP9" y "boot"
Tengo conectado un usb con flash.bin. Lo apago y enciendo pulsando menú, pero nada.
¿Alguien puede ayudarme? Gracias.

rafelingojuryu
Posts: 198
Joined: Tue Oct 03, 2017 5:11 pm

Re: UP9 boot

Post by rafelingojuryu »

selecciona el tipo de video del stb compatible con tu tv, presionando el boton verde del control remoto del stb hasta que tengas el video compatible con tu tv.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: UP9 boot

Post by Feralkiwi »

They added this function for older TV's that do not have PAL
Your V7 starts from the factory in PAL.
Do this below to change to NTSC.
Added fast key to switch video output mode or format.
we try to support some old TV or some signal mode TV
Press menu key to main menu.(Panel show "----")
press Green key to switch NTSC/PAL, the panel will show "PAL " or "NTSC"
Press Stop key to switch the video format
PAL mode : the panel will show "576I" -- "576P" -- "720P"(50HZ) --"1080I"(50HZ) --"1080P"(50HZ)
NTSC mode : the panel will show "480I" -- "480P" -- "720P"(60HZ) --"1080I"(60HZ) --"1080P"(60HZ)
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
Lining
网站管理员
Posts: 1169
Joined: Thu Aug 11, 2016 11:14 am

Re: UP9 boot

Post by Lining »

hugociber wrote:Hola.
Acabo de recibir mi Freesat V7 HD y al conectarlo al tv no aparece pantalla principal.
El tv muestra una pantalla negra con "Usb upgrade! Do not power off!"
El descodificador muestra "UP9" y "boot"
Tengo conectado un usb con flash.bin. Lo apago y enciendo pulsando menú, pero nada.
¿Alguien puede ayudarme? Gracias.

Press and hold the MUNE button for a long time to enter the forced upgrade interface.
Forced upgrades are targeted for software corruption. The boot cannot enter the interface.
FREESAT brand change GT MEDlA

hugociber
Posts: 2
Joined: Wed May 23, 2018 5:58 pm

Re: UP9 boot

Post by hugociber »

Muchas garcias por vuestros consejos.
Lo primero, decir que mi tv es un LED 47" bastante moderno. No es problema de PAL o SECAM
Con una combinación de todos vuestro consejos, he conseguido llegar a la pantalla "GT Media" y actualizar firmware (versión de mayo 2018), factory setting, sintonizar canales Astra, wifi y Cccam. He conseguido 900 canales.
El problema creo que está en el aparato.
Si lo apago y lo enciendo, me vuelve a salir la pantalla negra con "Usb upgrade, .. " en el tv y "UP9 Boot" en el deco
Al tratar de meter las listas de canales, se resetea y pierdo todo lo anterior.
Hoy al intentar ponerlo en marcha, en 10 minutos no he conseguido llegar a la pantalla de "GT Media" y lo he apagado :x
¿A alguien le ha ocurrido algo similar?
Gracias

Post Reply

Return to “GTMEDIA V7 SERIES”