Freesat 7 Combo with Motorised Dish
Moderators: admin, GTMedia Team
Freesat 7 Combo with Motorised Dish
Hi guys. Im new to all this. I have an old Topfield receiver with a motorised dish. Usually I get a technician to do the set up but this time Im trying to do it myself and Im very green.
1. With my Topfield it would be able to move the dish to locate the satellite. Can Freesat 7 Combo do the same?
from my Topfield I transferred the yellow, white & red cables and also LNB. but there are the other cables that seem to be to move the dish which i can figure out where to plug to the freesat unit as it is an open wire without socket.
Any ideas?
1. With my Topfield it would be able to move the dish to locate the satellite. Can Freesat 7 Combo do the same?
from my Topfield I transferred the yellow, white & red cables and also LNB. but there are the other cables that seem to be to move the dish which i can figure out where to plug to the freesat unit as it is an open wire without socket.
Any ideas?
Re: Freesat 7 Combo with Motorised Dish
I do not know that brand trying to google it but here are several models where you do not indicate us the model nor the motor brand and modelPacx wrote:Hi guys. Im new to all this. I have an old Topfield receiver with a motorised dish. Usually I get a technician to do the set up but this time Im trying to do it myself and Im very green.
1. With my Topfield it would be able to move the dish to locate the satellite. Can Freesat 7 Combo do the same?
from my Topfield I transferred the yellow, white & red cables and also LNB. but there are the other cables that seem to be to move the dish which i can figure out where to plug to the freesat unit as it is an open wire without socket.
Any ideas?
No The Freesat model and most of other brands they do not "move" the motor through wires
A) If you have an actuator for example you must have a "dish mover"
dish mover example
Code: Select all
http://www.sadoun.com/Sat/Products/Moteck/V-Box-II-control.htm
Code: Select all
http://www.powerjackmotion.com/product/satellite-dish-actuator-regular-type/
Code: Select all
https://www.amazon.com/DiSEqC-Satellite-motor-rotor-USALS/dp/B071DBYP2B
Case A
The dish mover connects to the LNB and 4 wires 2 gives 36V to the actuator (motor) and 2 wires for the sensor
And from the dish mover OUT LNB to Freesat V7 LNB IN or SAT IN
The you start savings on the settings for each sat the positions which they transfer to the dish positioner/mover for later use
Case B
The LNB connects to the motor outside and on the other connector goes inside straight to the receiver
This is pretty easy
So you can set this motor (is similar to the one shown) in 2 modes
USALS, is already preset you set it up and all sat positions are already recorded and work along with your longitude and Latitude that you must imput
Diseqc 1.2 is the other mode where you have to save each position sat by sat. On this mode you can move the motor with your remote and fine tune it EAST to WEST and vice versa. It saves I think up to 64 positions
On both modes your Freesat receiver "feeds" with power both the LNB and motor so you do not need extra wires or anything else all goes by the coax cable
I have them both
But like I said I do not know your configuration, brand or models
Here to help
MarSat
Re: Freesat 7 Combo with Motorised Dish
my bad... Topfield tf5000cip. this the link for your reference http://satetech.blogspot.com/2009/02/to ... p.html?m=1
i have a Yuri motorised dish not sure what model but its the big one
i have a Yuri motorised dish not sure what model but its the big one
Re: Freesat 7 Combo with Motorised Dish
Pacx wrote:my bad... Topfield tf5000cip. this the link for your reference http://satetech.blogspot.com/2009/02/to ... p.html?m=1
i have a Yuri motorised dish not sure what model but its the big one
That receiver is built in positioner, it means that topfield send 36V to the motor
The CASE B that i sent to you works with 13/18 V using the power from th receiver
Unfortunately I am not familiar with that motor Yuri a link, a picture of label would be a plus
Re: Freesat 7 Combo with Motorised Dish
The dish looks exactly like this. should be the same.
http://my110785134.fm.alibaba.com/produ ... _dish.html
http://my110785134.fm.alibaba.com/produ ... _dish.html
Re: Freesat 7 Combo with Motorised Dish
so following your case B. I would have to use my Topfield to position the dish, then Freesat 7 to scan the channels.
Is there a setup where switching channels from one satellite to another while watching with Freesat 7 possible.
Is there a setup where switching channels from one satellite to another while watching with Freesat 7 possible.
Re: Freesat 7 Combo with Motorised Dish
To move the positioner when you change channel on the new Freesat you would need a mover box, like a "Vbox", to replace your old receiver.Pacx wrote:so following your case B. I would have to use my Topfield to position the dish, then Freesat 7 to scan the channels.
Is there a setup where switching channels from one satellite to another while watching with Freesat 7 possible.
Best for now to use your old box to move the dish, while using the Freesat to watch the TV.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat 7 Combo with Motorised Dish
Hi Owen. Can you maybe list for me this mover box. Will look into it.
For now I guess I will just play around with what I have.
Need to do some research on how to update firmware and keys. Never done that before.
Very much appreciate your help Marsat & Owen
For now I guess I will just play around with what I have.
Need to do some research on how to update firmware and keys. Never done that before.
Very much appreciate your help Marsat & Owen
Re: Freesat 7 Combo with Motorised Dish
Pacx wrote:Hi Owen. Can you maybe list for me this mover box. Will look into it.
For now I guess I will just play around with what I have.
Need to do some research on how to update firmware and keys. Never done that before.
Very much appreciate your help Marsat & Owen
Yes you need a dish mover of 36V
Owen is correct use the old receiver as mover and I will post bellow some examples
Code: Select all
https://www.ebay.com/i/232897473974?chn=ps
Exactly same commercialized with different brands possible clone of some brand Is unknown to me
another brand is V-Box II
or do a google search as "satellite dish positioners "your country" or just "satellite dish positioners"
Good luck
Re: Freesat 7 Combo with Motorised Dish
how do i set the satellite setting in freesat v7 combo with the mover box so that it automatically position the dish when changing channels.
With the freesat unit attached to the mover box is it possible to do a new satellite search?
i notice there is a motor option i think with on, DiSeqc & Usals.
With the freesat unit attached to the mover box is it possible to do a new satellite search?
i notice there is a motor option i think with on, DiSeqc & Usals.
Re: Freesat 7 Combo with Motorised Dish
If you get a DiSEqC mover (Positioner) like the Vbox, you use DiSEqC motor setting.
Once set in Antenna setting you click on the word DiSEqC and this takes you to the motor setting page.
There you can set the position numbers, limits etc.
Note that some Mover boxes save the position number at the same time as you set it in the Freesat unit, so check that you have your dish on that sat / position at that time, or set the positions in the Freesat unit with the Vbox turned off.
USARL is used mostly for small ku dishes with the motor unit running power off the LNB cable.
Owen
Once set in Antenna setting you click on the word DiSEqC and this takes you to the motor setting page.
There you can set the position numbers, limits etc.
Note that some Mover boxes save the position number at the same time as you set it in the Freesat unit, so check that you have your dish on that sat / position at that time, or set the positions in the Freesat unit with the Vbox turned off.
USARL is used mostly for small ku dishes with the motor unit running power off the LNB cable.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat 7 Combo with Motorised Dish
thanks Owen.. since my topfield has an Lnb out for another receiver i thought i could try to use it as mover box controlled through freesat receiver. So far only failure.
Anyways now im moving on and trying to learn about softcam keys. I've read how to import it from Usb and editing on wordpad but where can I find the softcam keys. Looking for updated keys AsiaSat 7 105.5 E
Anyways now im moving on and trying to learn about softcam keys. I've read how to import it from Usb and editing on wordpad but where can I find the softcam keys. Looking for updated keys AsiaSat 7 105.5 E
Re: Freesat 7 Combo with Motorised Dish
NO wordpad will add hidden unwanted characters to the file and will fail use NOTEPADPacx wrote:thanks Owen.. since my topfield has an Lnb out for another receiver i thought i could try to use it as mover box controlled through freesat receiver. So far only failure.
Anyways now im moving on and trying to learn about softcam keys. I've read how to import it from Usb and editing on wordpad but where can I find the softcam keys. Looking for updated keys AsiaSat 7 105.5 E
As per the mover, NO you need to connect the LNB straight to the Freesat and the Topfield use only to power the motor
Re: Freesat 7 Combo with Motorised Dish
thanks Marsat.. i didn't think about that.
how about the softcam keys? where can i request for it?
how about the softcam keys? where can i request for it?
Re: Freesat 7 Combo with Motorised Dish
never mind that keys. just read that i need 10 post before someone would send me keys.. i will just fiddle around with something else first.....
Re: Freesat 7 Combo with Motorised Dish
by the way i just did one firmware update on the latest. Is it ok to just update to the latest or i need to update to previous versions first..
Re: Freesat 7 Combo with Motorised Dish
Well I do not know who hold a softcam collection of Keys for europe and Asia and even if there is one. I know Jim has it for North america and can be requested here.
You havent told where in the planet you are.
Otherwise you can start collecting keys from the Transponders you like to watch. Most of them PU are already embedded in the firmware so you may not needed them. Should you need need you may ask on the forum if they can share them with you, then copy and paste on the softcam.key file
What is more should you not have a response from anyone. Or you get an answer that those keys are not available you may want to do "community service" You may want to record that channel you can not open in segments of 5 minutes do not know how many times but the more the merrier.
in TS format. I do not know who handles this but then you send those files for the "blender" and comes out your keys. Just contact the forum moderators they know. I have the software but not the time
Code: Select all
http://www.freesat.cn/forum/viewtopic.php?f=32&t=9349
Otherwise you can start collecting keys from the Transponders you like to watch. Most of them PU are already embedded in the firmware so you may not needed them. Should you need need you may ask on the forum if they can share them with you, then copy and paste on the softcam.key file
What is more should you not have a response from anyone. Or you get an answer that those keys are not available you may want to do "community service" You may want to record that channel you can not open in segments of 5 minutes do not know how many times but the more the merrier.
in TS format. I do not know who handles this but then you send those files for the "blender" and comes out your keys. Just contact the forum moderators they know. I have the software but not the time
Re: Freesat 7 Combo with Motorised Dish
all tho I can't hit that bird to test but I have searched keys and it pops up alot so if you do a search for the keys I'm sure you can find them you can look here if you know how to enter them sorry I can't be of anymore help
Code: Select all
http://www.latest-files.com/powervu-keys.php
Re: Freesat 7 Combo with Motorised Dish
Im in Malaysia. didn't know the codes work differently on location. thought as long its the same satellite it will work its been four days into having this receiver. still don't know what it can do. could it record the channel? facing a problem where my topfield can only detect AsiaSat7 and Palapa D... before i could catch thaicom and also intelsat. been scanning with all the TPs but still nada.. not sure is it because the Topfield firmware is outdated 2005 or something else.
hi Crunk2 thanks for the link will work on it... lots to learn and absorb
hi Crunk2 thanks for the link will work on it... lots to learn and absorb
Re: Freesat 7 Combo with Motorised Dish
from 105.5E i was going to 98.0E. Tried typing in the TP but the receiver is telling me out of range. Is it because my dish cant point to that direction?
Re: Freesat 7 Combo with Motorised Dish
If you have your LNB set for C band and then try to enter a Ku band TP it will report out of range.Pacx wrote:from 105.5E i was going to 98.0E. Tried typing in the TP but the receiver is telling me out of range. Is it because my dish cant point to that direction?
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat 7 Combo with Motorised Dish
hi guys,
I have a wifi dongle for the unit. can i get youtube or a browser on the receiver?
I have a wifi dongle for the unit. can i get youtube or a browser on the receiver?
Re: Freesat 7 Combo with Motorised Dish
Use "Chip Set" as a search on this web site and you will find what chip sets Freesat wifi works with.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat 7 Combo with Motorised Dish
What my friend Owen meant is:Feralkiwi wrote:Use "Chip Set" as a search on this web site and you will find what chip sets Freesat wifi works with.
Owen
Not all the USB WiFi adaptor works on Freesat Units: it has to be RT5370 or Ralink RT5370
Secondly your unit should work with youtube. I do not remember if the icon is there or it shows when inernet is connected or is gray out. That I do not remember But It should work
Thirly, no you can not have a browser in this model. The only one is the GTC
An last as bonus you can get kinky with youporn entering the correct 4 digit passcode
Will cost you a beer
Re: Freesat 7 Combo with Motorised Dish
Thanks Owen & Marsat
hmm youporn... interesting but I guess it wont work here with the government internet censorship...
i bought a freesat wifi dongle with my receiver... seller told me its a freesat wifi dongle. havent plug it in tho.
hmm youporn... interesting but I guess it wont work here with the government internet censorship...
i bought a freesat wifi dongle with my receiver... seller told me its a freesat wifi dongle. havent plug it in tho.