Page 1 of 1

58 West question

Posted: Sun Sep 16, 2018 5:30 am
by cnctest
Is it possible to open the channels of the tp 4040H and 4000H with the V7 HD?

Thanks for the support.

Re: 58 West question

Posted: Sun Sep 16, 2018 1:50 pm
by Gomes
cnctest wrote:Is it possible to open the channels of the tp 4040H and 4000H with the V7 HD?

Thanks for the support.
Sim...

Re: 58 West question

Posted: Sun Sep 16, 2018 2:01 pm
by cpr43
cnctest wrote:Is it possible to open the channels of the tp 4040H and 4000H with the V7 HD?

Thanks for the support.
Yes, it is posible and working fine on V7HD. You will need to have the latest keys for them.

https://www.freesat.cc/forum/viewtopic.php?f=47&t=2007

Re: 58 West question

Posted: Sun Sep 16, 2018 2:35 pm
by cnctest
I understand, I need more than 10 post, I only need those two emm keys of 58w. Please help me.

Thank you.

Re: 58 West question

Posted: Sun Sep 16, 2018 7:01 pm
by Chocolatin
I also need them please, thank you

Re: 58 West question

Posted: Sun Sep 16, 2018 8:44 pm
by cpr43
Chocolatin wrote:I also need them please, thank you
Pm sent

Re: 58 West question

Posted: Sun Sep 16, 2018 9:41 pm
by cnctest
cpr43 ,

please help me with this emm keys, 58w tp 4040H and 4000H .

Thanks in advance.

Re: 58 West question

Posted: Sun Sep 16, 2018 9:42 pm
by cpr43
cnctest wrote:cpr43 ,

please help me with this emm keys, 58w tp 4040H and 4000H .

Thanks in advance.
PM sent

Re: 58 West question

Posted: Sun Sep 16, 2018 9:46 pm
by cnctest
Thanks very much Cpr!

Re: 58 West question

Posted: Sun Sep 16, 2018 10:00 pm
by Chocolatin
thank you very much friend

Re: 58 West question

Posted: Mon Sep 17, 2018 1:02 am
by cnctest
Hi Cpr,

I copy and paste the emm keys that you sent me in a softcam file, install it in v7hd and do not open the channels. What am I doing wrong?

Thanks in advance

Re: 58 West question

Posted: Mon Sep 17, 2018 2:46 am
by cpr43
cnctest wrote:Hi Cpr,

I copy and paste the emm keys that you sent me in a softcam file, install it in v7hd and do not open the channels. What am I doing wrong?

Thanks in advance
Make sure you are using the latest bin file for the V7hd. Delete all channels and run a fresh blindscan. Let it set in channel for some time to open

Re: 58 West question

Posted: Mon Sep 17, 2018 2:50 am
by cnctest
I am going to try.

Thanks

Re: 58 West question

Posted: Mon Sep 17, 2018 7:49 am
by cnctest
Do not work, i install the bin on August 3, factory reset, erase all the channels, scan the channels again, install the softcam key with the emm keys and nothing. not open the channels tp 4000h and 4040 h, what am I doing wrong?

Re: 58 West question

Posted: Mon Sep 17, 2018 10:01 am
by cpr43
cnctest wrote:Do not work, i install the bin on August 3, factory reset, erase all the channels, scan the channels again, install the softcam key with the emm keys and nothing. not open the channels tp 4000h and 4040 h, what am I doing wrong?
I sent you some additional keys to try

Re: 58 West question

Posted: Wed Sep 19, 2018 8:01 pm
by raulhinojosa
Me pueden pasar por favor las keys EMM de los tp 4000H y 4040H, para mi también. Gracias de antemano.

Re: 58 West question

Posted: Sun Nov 18, 2018 2:36 am
by xavierjr
Hola, no entiendo mucho, soy nuevo. He tenido el freesat casi por un año pero siempre como usuario de soporte IKS, pero no entiendo mucho de los términos que ustedes utilizan. Sin embargo me surge la curiosidad por el satelite 58W que mencionan; es el Cielito? (como le dicen) ¿Ya se pueden visualizar los canales de nuevo??

Gracias.

Re: 58 West question

Posted: Sun Nov 18, 2018 3:30 pm
by kchto
xavierjr wrote:Hola, no entiendo mucho, soy nuevo. He tenido el freesat casi por un año pero siempre como usuario de soporte IKS, pero no entiendo mucho de los términos que ustedes utilizan. Sin embargo me surge la curiosidad por el satelite 58W que mencionan; es el Cielito? (como le dicen) ¿Ya se pueden visualizar los canales de nuevo??

Gracias.
Saludos xavierjr.
En este foro hay mucha informacion Te sugiero que empiezes a buscar y leer, y cuando tengas dudas habre un nuevo post y te ayudaremos con tus preguntas. El satelite que se esta mencionando es el Intelsat 21 (58W) y tiene frecuencias en Bandas C y KU. Cielito esta en la banda KU de este satelite y no se puede visializar sus canales. Lo que se esta preguntanto en este post es si es posible ver los canales que se encuentran en la fecuencias 4040H y 4000H (banda C). La respuesta es si pero para que te envien las llaves tienes que tener mas de 10 post.