Please help me,
I Can’t open display menu in tv when i press button menu in remote. In my receiver only show - - - -. I use receiver GtMedia V8 Golden.
Thank’s
Can’t open display menu in tv when i press button menu in remote
Moderators: admin, GTMedia Team
Re: Can’t open display menu in tv when i press button menu in remote
Do you get any picture on your TV, from your receiver.
What lead do you use from the receiver to your TV.
Have you tried new batteries.
Den
What lead do you use from the receiver to your TV.
Have you tried new batteries.
Den
Re: Can’t open display menu in tv when i press button menu in remote
You are stuck om PAL/Ntsc TV video format. Golden should has old process to come out:
Press menu key to main menu.(Panel show "----")
press Green key to switch NTSC/PAL, the panel will show "PAL " or "NTSC"
Press Stop key to switch the video format
PAL mode : the panel will show "576I" -- "576P" -- "720P"(50HZ) --"1080I"(50HZ) --"1080P"(50HZ)
NTSC mode : the panel will show "480I" -- "480P" -- "720P"(60HZ) --"1080I"(60HZ) --"1080P"(60HZ)
Re: Can’t open display menu in tv when i press button menu in remote
Try the box on another TV that does both NTSC and PAL and set up the output to suit your TV.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.