Why cannot find signal quality for Chinasat 11 for Ninmedia?
It doesn't support GTmedia Nova Orange?
Ninmedia
Moderators: admin, GTMedia Team
Re: Ninmedia
Are you using LNB Ku Universal (9750-10600) or Standard (10750).? Does the coax cable comes straight from the antenna/LNB or are you using any switch. Finally, is the Dish properly aimed to Chinasat 11??
Re: Ninmedia
The LNB is Universal. Aim correct to Chinasat 11 using machines both China and Malaysia test. The radios channels are working. The LNB using Satellite Dish fixed straight to the decoder. I don't know what do you mean switch, the cable from the dish is straight to the GTMedia Nova decoder.
What i get is paid tv channels not Ninmedia channels. How do i fix it to TP 12500 V 43200 ?
Thank you.
What i get is paid tv channels not Ninmedia channels. How do i fix it to TP 12500 V 43200 ?
Thank you.
cpr43 wrote:Are you using LNB Ku Universal (9750-10600) or Standard (10750).? Does the coax cable comes straight from the antenna/LNB or are you using any switch. Finally, is the Dish properly aimed to Chinasat 11??
- Attachments
-
- IMG_20181018_000731.jpg (957.19 KiB) Viewed 1320 times
Re: Ninmedia
For TP 12500 V 43200 you need to have your LNB setting in the Antenna settings menu set for 9759-10600.SKSLink wrote:The LNB is Universal. Aim correct to Chinasat 11 using machines both China and Malaysia test. The radios channels are working. The LNB using Satellite Dish fixed straight to the decoder. I don't know what do you mean switch, the cable from the dish is straight to the GTMedia Nova decoder.
What i get is paid tv channels not Ninmedia channels. How do i fix it to TP 12500 V 43200 ?
Thank you.
cpr43 wrote:Are you using LNB Ku Universal (9750-10600) or Standard (10750).? Does the coax cable comes straight from the antenna/LNB or are you using any switch. Finally, is the Dish properly aimed to Chinasat 11??
The unit then sees this and switches the 22kHz tone on to use the High band part of your LNB (10600).
Yes with the cable direct from the box to the LNB you do not need to use DiSEqC 1.0 ro 1.1 switch settings, leave them disabled.
When set up you can manually add that TP to the list.
Go to the satellite list and move over the name of Chinasat 11. Then press recall, or is it now the Sat, button to access the TP menu. The button info is along the bottom of each page.
When there use the color buttons as shown at the bottom of the page to "Add" the TP.
After that select that TP and use the blue button to scan it.
Good luck
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.