Freesat v8 Firmware update 02-11-2018
Moderators: admin, GTMedia Team
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Freesat v8 Firmware update 02-11-2018
Freesat v8 Firmware update 02-11-2018.
I test at Intelsat20 or 68.5E for sony group work fine. are you try this?
download new firmware at here.
I test at Intelsat20 or 68.5E for sony group work fine. are you try this?
download new firmware at here.
Re: Freesat v8 Firmware update 02-11-2018
Thanks 4 The Info but when is the software for GT Media V8 NOVA ORANGE... Coming out supporting the Said package??
Freesat v8 Firmware upgrade and caused problems
Hello
When I upgraded my Freesat V8 finder to the recent firmware, my device seem to crash.
When switched on, only light comes on. No firmware boots up.
Any resolved this kind of problem before
Please need help to fix this
When I upgraded my Freesat V8 finder to the recent firmware, my device seem to crash.
When switched on, only light comes on. No firmware boots up.
Any resolved this kind of problem before
Please need help to fix this
Re: Freesat v8 Firmware upgrade and caused problems
Roll back to your previous version:heich wrote:Hello
When I upgraded my Freesat V8 finder to the recent firmware, my device seem to crash.
When switched on, only light comes on. No firmware boots up.
Any resolved this kind of problem before
Please need help to fix this
Place a copy of the previous software on your USB stick and rename it "flash.bin".
With the usb in your Finder , power on while repeat pressing "Menu" on the remote.
The unit should reload the software.
Re: Freesat v8 Firmware update 02-11-2018
on my experience after load new firm ware will turn you system to PAL not NTSC is the way to fix on you remoter contro check that green bottom pres one then be back good luck !
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Freesat v8 Firmware update 02-11-2018
yes, must be new setting all time.frogtong wrote:on my experience after load new firm ware will turn you system to PAL not NTSC is the way to fix on you remoter contro check that green bottom pres one then be back good luck !
Freesat v8 Firmware update caused problems
I tried the 2 solutions proposed above here.
I tried using previous firmware on flash drive and repeatedly pressing Menu button but didn't work.
I also tried pressing the Green button but didn't work.
Attached is the device
Appreciate any help
I tried using previous firmware on flash drive and repeatedly pressing Menu button but didn't work.
I also tried pressing the Green button but didn't work.
Attached is the device
Appreciate any help
Re: Freesat v8 Firmware update caused problems
flash.bin recovery is done like this.heich wrote:I tried the 2 solutions proposed above here.
I tried using previous firmware on flash drive and repeatedly pressing Menu button but didn't work.
I also tried pressing the Green button but didn't work.
Attached is the device
Appreciate any help
Place a copy of the unpacked software (the .bin file) on a USB stick and rename it "flash.bin"
With the USB in the unit, power on while repeat pressing "Menu" on the remote. You must use the V7 remote on the V7.
The unit should reload the software.
Also other users say that you must use a USB stick, not a card holder etc and that stick must be 32Gb or under.
Use the rear USB port on units that have two ports.
I have had units that will not recover.
Try using the same software as was in the unit when it crashed, not the new update software.
You must use the correct software, ie that for the V7HD for the V7HD etc, not software for any other freesat units.
Try even older software as the file for flash.bin.
Look at the LED in the USB stick. When the TV shows the message "USB Upgrade, do not turn off" you should see the LED on the USB flash as the file is loaded.
The USB LED should also flash a few times as the unit first powers on and looks at it.
Also users have said to use the rear USB port for this on V8 units.
Good luck
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 45
- Joined: Sat Mar 04, 2017 9:16 pm
- Location: España
Re: Freesat v8 Firmware update 02-11-2018
Buenas noches compañeros.Eak_Dumnern wrote:Freesat v8 Firmware update 02-11-2018.
I test at Intelsat20 or 68.5E for sony group work fine. are you try this?
download new firmware at here.
He instalado la versión del 02/11/2018 y funciona al 100%. Ya no entra en reincios continuos al entrar en favoritos. Así que muchas gracias a los creadores y si observo alguna anomalía la comentaré por aquí.
Saludos.
Good evening, comrades.
I have installed the version of 11/02/2018 and it works 100%. It no longer enters continuous resumes when entering favorites. So thank you very much to the creators and if I see any anomaly I will comment on it here.
Greetings.
Freesat v8 Firmware updates caused problems
Thank you Sir.
I noticed that I may have described the wrong device to you. The unit I have is the Freesat V8 Finder V-71 HD.
It's the Digital Satellite Finder. Yellow and blue in color.
Does the steps you described work on this types of units.
I noticed that I may have described the wrong device to you. The unit I have is the Freesat V8 Finder V-71 HD.
It's the Digital Satellite Finder. Yellow and blue in color.
Does the steps you described work on this types of units.
Re: Freesat v8 Firmware update 02-11-2018
Yes. you need to use the correct software, each freesat unit has its own.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat v8 Firmware update 02-11-2018
A F N gone turn to Hasmode 19/20, When release new firmware for V8Nova Blue and orange?
- edvingeorge
- Posts: 65
- Joined: Tue Apr 17, 2018 11:25 am
- Location: Cochin
Re: Freesat v8 Firmware update 02-11-2018
Waiting for the new update for Nova Series..
Re: Freesat v8 Firmware update 02-11-2018
Thanks for the updates, but what about the EPG showing mixed titles between channels? It will be fixed??