GTMEDIA V8 BLUE SCREEN GREEN/RED/BLUE

[macaco222]

Hi the decoder have the error of display green/blue / red with the last firmware. i configure th RGB in setup of menu but continue the problem .
Thanks

[Feralkiwi]

Check that you have PAL / NTSC set. You can use the green button to set this.

Added fast key to switch video output mode or format.
we try to support some old TV or some signal mode TV
Press menu key to main menu.(Panel show "----")
press Green key to switch NTSC/PAL, the panel will show "PAL " or "NTSC"
Press Stop key to switch the video format
PAL mode : the panel will show "576I" -- "576P" -- "720P"(50HZ) --"1080I"(50HZ) --"1080P"(50HZ)
NTSC mode : the panel will show "480I" -- "480P" -- "720P"(60HZ) --"1080I"(60HZ) --"1080P"(60HZ)

Also older TV's use earlier versions of HDMi that Freesat does not support.

Owen