Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
myselfo
Posts: 17
Joined: Thu May 31, 2018 5:15 am

Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by myselfo »

The firmware has dissapeared from the download section. Is it dangerous? Do I have to downgrade to november?

clydde
Posts: 42
Joined: Thu Nov 29, 2018 2:25 pm

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by clydde »

+1 v8nova Orange

The firmware has dissapeared from the download section. Is it dangerous? Do I have to downgrade to november?

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by Feralkiwi »

Looking at the forum logs I see that, Yes, Lining did remove those software files.

I do not know why.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

CHI
Posts: 133
Joined: Fri Apr 20, 2018 8:36 am

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by CHI »

Feralkiwi wrote:Looking at the forum logs I see that, Yes, Lining did remove those software files.

I do not know why.

Owen
Would it be that it was not a complete update? I happened to install it and my first attempt was to see if the SONY's at 68.5 would be opened, but no it wasn't so.
However the same update on v7 series its reported that it open Sony at 68.5.

joaquin012
Posts: 132
Joined: Sun Dec 25, 2016 11:56 am
Location: Antequera

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by joaquin012 »

I have installed it on the V8 Super and I have not found anything strange. But it is true that it has disappeared from its
Saludos de joaquin

tvboxkubagus
Posts: 8
Joined: Tue Nov 27, 2018 6:27 am

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by tvboxkubagus »

Anyone can re upload the firmware? Thanks...

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by cpr43 »

tvboxkubagus wrote:Anyone can re upload the firmware? Thanks...
It will be a good idea to wait and see why it was removed.

chicolin
Posts: 227
Joined: Fri Aug 12, 2016 1:37 pm
Location: Mexico

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by chicolin »

yo tengo instalado en firmware del 11 dic 2018 y esta funcionando bien, no se me corta a la hora nada

zf-freak
Posts: 32
Joined: Fri Aug 17, 2018 4:37 pm

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by zf-freak »

No, wait until the next one comes ...

User avatar
edvingeorge
Posts: 65
Joined: Tue Apr 17, 2018 11:25 am
Location: Cochin

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by edvingeorge »

I faced the issue with frequent restart .. I think this is why they recalled the firmware.
May be some memory management issue..

Vles
Posts: 12
Joined: Mon Nov 06, 2017 8:20 am

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by Vles »

I have the receiver after the firmware is dead - steady Load. I will try to start through RS-232 :-(

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by Feralkiwi »

Vles wrote:I have the receiver after the firmware is dead - steady Load. I will try to start through RS-232 :-(
Have you tried the flash.bin method?

flash.bin recovery is done like this.

Place a copy of the unpacked software (the .bin file) on a USB stick and rename it "flash.bin"
With the USB in the unit, power on while repeat pressing "Menu" on the remote. You must use the V7 remote on the V7.
The unit should reload the software.

Also other users say that you must use a USB stick, not a card holder etc and that stick must be 32Gb or under.

I have had units that will not recover.
Try using the same software as was in the unit when it crashed, not the new update software.
You must use the correct software, ie that for the V7HD, not software for any other freesat units.

Try even older software as the file for flash.bin.

Look at the LED in the USB stick. When the TV shows the message "USB Upgrade, do not turn off" you should see the LED on the USB flash as the file is loaded.
The USB LED should also flash a few times as the unit first powers on and looks at it.
Also users have said to use the rear USB port for this on V8 units.

Good luck

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by cpr43 »

New released in the download section now

alex1963
Posts: 1
Joined: Sat Jun 09, 2018 2:49 am

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by alex1963 »

Subject: Any idea why the ABS CBN 4080H30000 on Intelsat 19 Signal Dissapear and Encryted on Sunday 16/12/2018
My unit is Freesat V8 Super ang I need advice what to do to regain back the signal access.
Many thanks,
Alex

necromars
Posts: 64
Joined: Thu Jan 04, 2018 5:42 am

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by necromars »

alex1963 wrote:Subject: Any idea why the ABS CBN 4080H30000 on Intelsat 19 Signal Dissapear and Encryted on Sunday 16/12/2018
My unit is Freesat V8 Super ang I need advice what to do to regain back the signal access.
Many thanks,
Alex
same here..

GS1964
Posts: 6
Joined: Fri Aug 24, 2018 3:38 pm

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by GS1964 »

Alguien lo ha probado esta vez que lo han vuelto a subir ????? Re: 11/12/2018 firmware V8 de Gold

Yo ya no sé que hacer si ponerlo o no

Vles
Posts: 12
Joined: Mon Nov 06, 2017 8:20 am

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by Vles »

Feralkiwi
Thank you very much, it worked out well that I have freesat V7HD...

Eak_Dumnern
网站管理员
Posts: 667
Joined: Thu Aug 11, 2016 10:58 am
Location: Thailand

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by Eak_Dumnern »

last firmware today on 17-12-2018 is work fine.

necromars
Posts: 64
Joined: Thu Jan 04, 2018 5:42 am

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by necromars »

yes it is working again... thanks

albaicinero
Posts: 45
Joined: Sat Mar 04, 2017 9:16 pm
Location: España

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by albaicinero »

Eak_Dumnern wrote:last firmware today on 17-12-2018 is work fine.
Buenas tardes.

¿A que se le llama que trabaja bien?
¿A reinicios en buqle en los canales de adultos alemanes?
¿A reinicios en el canal Tele 5 de España? Siete veces en lo que va de tarde.

Pues si eso es trabajar bien, no quiero ni pensar en un firmware que trabaje mal.

Lo que más me indigna es que no se preocupen en pedirnos más información a los que tenemos estos problemas, que somos miles, para intentar solucionar el problema. Ni siquiera en darnos algunas sugerencias. Pero en fin, esto es lo que hay.

Saludos.

Eak_Dumnern
网站管理员
Posts: 667
Joined: Thu Aug 11, 2016 10:58 am
Location: Thailand

Re: Firmware 11-12-2018 for V8 Super and V8 Golden has dissapeared

Post by Eak_Dumnern »

some bug firmware of Freesat v8 super and golden same last firmware is watching IPTV and come back to TV channel or reboot.

Post Reply

Return to “GTMEDIA V8 SERIES”