You are scanning the wrong satellite, Air1 & K-LOVE Radio are broadcast on SES 1 at 101.0°W (11705 V 3650)mickey46834 wrote:So it's listing new TP's and in the setup menu it's showing 90% signal 48% quality. But yet no channels are there. It's really cloudy out this evening so I'll see about re aiming the dish tomorrow when it's clear out and see what happens.
v8 super firmware 17/12/2018
Moderators: admin, GTMedia Team
Re: v8 super firmware 17/12/2018
Last edited by mikelsat on Wed Jan 16, 2019 6:16 pm, edited 1 time in total.
Re: v8 super firmware 17/12/2018
There is a setting in the "Scan" window that sets to Radio only or TV and Radio.
You may have it set to radio.
Owen
You may have it set to radio.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
- mickey46834
- Posts: 11
- Joined: Sun Dec 23, 2018 9:19 pm
- Location: Indiana, USA
Re: v8 super firmware 17/12/2018
Today I'm getting RT Russia Today, NHK Japan, SBN Network and some Microspace TV channels, far as radio last night I was getting the overcomer, K Love and a few more. Which The overcomer radio is G19 and far as tv RT is G19. No sat aim changes just a factory flash firmware, then the 12/17/18 Update and American KU sat df firmware. Every time I blind scan it's picking up more TP's but nothing on them. 91% signal 74% quality. G19 has 200+ channels I'm getting 14.
GT-Media (Freesat) V8 Super. 30" Fortec Star Dish, Stab HH90 motor, W.S.I. ESX521U-FE Ku-lnb.
Re: v8 super firmware 17/12/2018
Also check when you scan that you have the scan settings to Radio / Tv and have "Network Search" "Off".
Also check that you have the correct LNB setting in "Antenna" settings.
Owen
Also check that you have the correct LNB setting in "Antenna" settings.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
- mickey46834
- Posts: 11
- Joined: Sun Dec 23, 2018 9:19 pm
- Location: Indiana, USA
Re: v8 super firmware 17/12/2018
I went so far as to remove the port switch so it's coax straight to lnb also as maybe going through the motor was causing an issue. Bad connection and so on. Just trying to rule things out. Yes that is how the search is set up to 'scan all', 'TV + Radio', network off. I have also verified antenna setup is all correct. This was all working fine and had about 9 satellites programmed, I got busy with work and did not turn it on for about a month. So it was just setting turned off for that time. And when I turned it on to watch it that's when i started having all these issues. So my set up was working just fine a month ago. Lots of channels and 9 satellites programmed.
GT-Media (Freesat) V8 Super. 30" Fortec Star Dish, Stab HH90 motor, W.S.I. ESX521U-FE Ku-lnb.