Hello
today I connected the decoder. everything was ok until I switched the options on the other menu. I switched power on mode to enter standby mode. The decoder does not turn on from this time. turns on for a moment and turns off after 5 seconds.
How can I restore factory settings in this case, as I can not enter the menu and change anything from the TV remote control?
in the attachment is a photo from another decoder on which I have marked out the options I have changed
V8 pro 2 - problem
Moderators: admin, GTMedia Team
V8 pro 2 - problem
- Attachments
-
- IMG_20190320_081300.jpg (1.87 MiB) Viewed 976 times
Re: V8 pro 2 - problem
Othyers have reported this fault.
You will need to do a flash.bin recovery.
Save a copy of the unpacked software on a USB stick and rename it "flash.bin" and power on while repeat pressing the menu button.
Owen
You will need to do a flash.bin recovery.
Save a copy of the unpacked software on a USB stick and rename it "flash.bin" and power on while repeat pressing the menu button.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8 pro 2 - problem
Thank you very much for your answer. You are great. It works perfectly.
Unfortunately, I could not use the search engine because I had an error
Best Reagards
Unfortunately, I could not use the search engine because I had an error
Best Reagards