biss keys for the super v8

[mrel]

Hello
I download new firmware 3-19-2019 ,will this firmware automatic pickup the biss keys?
If not does anyone have the biss keys for satellite Eutelsat 113 west c-band 4040 V sr 30000.
The new firmware say fix hash mode ,what is a hash mode?
Thank your help.
mrel

[iq180]

Hello
I download new firmware 3-19-2019 ,will this firmware automatic pickup the biss keys?
If not does anyone have the biss keys for satellite Eutelsat 113 west c-band 4040 V sr 30000.
The new firmware say fix hash mode ,what is a hash mode?
Thank your help.
mrel

The CHs on 113.0w TP-4040-V-30000 are ITC at this time, hash mode has nothing to do with BISS, it has to do with Powervu and the A F N CHs and a few other CHs on other sats like 43.1w, 55.5w and 58.0w I think and some other eastern ark sats.

[mrel]

IQ180
The super V8 receiver says the following channels KMCC,WMEI,WFMZ,WPVN,WLLA,WBNA,WJYS,WAOH,KWHY,KRFT.
is Biss keys not in the clear.
mrel

[cpr43]

IQ180
The super V8 receiver says the following channels KMCC,WMEI,WFMZ,WPVN,WLLA,WBNA,WJYS,WAOH,KWHY,KRFT.
is Biss keys not in the clear.
mrel

Please do 2-3 minutes TS record and send for evaluation

[iq180]

IQ180
The super V8 receiver says the following channels KMCC,WMEI,WFMZ,WPVN,WLLA,WBNA,WJYS,WAOH,KWHY,KRFT.
is Biss keys not in the clear.
mrel

Well that's odd, my V8 Nova has them as ITC, I will check it on my V8 Super.

[iq180]

IQ180
The super V8 receiver says the following channels KMCC,WMEI,WFMZ,WPVN,WLLA,WBNA,WJYS,WAOH,KWHY,KRFT.
is Biss keys not in the clear.
mrel

Well some CHs on this TP are ITC but the CHs you are talking about do not clear on any of my receivers, Freesat receiver or any other brands I have and none of them ID as BISS, my Skysat receiver gives a window with =No Service= in it, I will do a 3 min TS record and send it to cpr43.

[Feralkiwi]

If you start from a channel that does not show what encryption it is and then go to condittional access menu / 6666 / key edit / constant CW and then press Green for "Add" you will see the CAid for that channel.
2600 is BISS.

Owen

[juan_vale]

On my V7HD those encrypted channels show the "B" flag and I get the SCRAMBLED message on the TV screen.
I made a 3 minute TS recording using my V7HD, and you can download it here >>

Code: Select all

https://1drv.ms/v/s!Al422I6-6NiAhH-AP9H28wgI4KYJ

I could not find any Crypto8's in this recording and in another I made,just to check. (Rainbow Table Tool)