since v474, v8super take long time to poweroff

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
car168
Posts: 16
Joined: Fri Aug 12, 2016 3:40 am

since v474, v8super take long time to poweroff

Post by car168 »

I found it took about 12s to enter standby state if the version is v474~v500.

Before that(such as on v458), it takes only about 2s.

Is it really necessary to take so many time to poweroff? Can this be improve on next version?

User avatar
Feralkiwi
网站管理员
Posts: 8341
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: since v474, v8super take long time to poweroff

Post by Feralkiwi »

Yes I also find the V8 Golden take that long to power off.
I wondered if the unit was trying to use the internet before it powered down, but there was no traffic on the net during shut down.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

chicolin
Posts: 227
Joined: Fri Aug 12, 2016 1:37 pm
Location: Mexico

Re: since v474, v8super take long time to poweroff

Post by chicolin »

Carl168
you can configure in other setting the time to power off.
i configure thar and only 2 seconds puting off with de firmware 500.
If you can't do it. tell me please and explain with Little tutorial

User avatar
Rambo
Posts: 153
Joined: Mon Aug 15, 2016 8:29 am

Re: since v474, v8super take long time to poweroff

Post by Rambo »

It is a bug! we will fix it ASAP!
Day Day Up!

car168
Posts: 16
Joined: Fri Aug 12, 2016 3:40 am

Re: since v474, v8super take long time to poweroff

Post by car168 »

chicolin wrote:Carl168
you can configure in other setting the time to power off.
i configure thar and only 2 seconds puting off with de firmware 500.
If you can't do it. tell me please and explain with Little tutorial
Hi Chicolin, thanks for your guide.

I tried your way on v500 firmware and it did have some change. Let's discuss a little more.

There is "power off mode" and "power on mode" in the "other setting". Both have two options as below:

power off mode: "panel show time"(default)/"Panel closed"
power on mode: "Enter Application Mode"(default)/"Enter standby mode".

Actually, no matter how "power off mode" set, the shutdown time is the same.

If power on mode set to "Enter Application Mode", it cost about 12s to shutdown.(if insert a USB disk equipted with R/W light on the front panel, the disk light will be off). This was the issue I mentioned before.

If power on mode set to "Enter standby mode", it cost about 2s to "shutdown" . I underlined here as you would find the disk light was still on if you inserted one. I believed this machine just entered "sleep" state somehow, instead of real shutdown.

What's the mean of "Application Mode" and what's the difference between "Enter Application Mode"(default)/"Enter standby mode"? Can anybody give some comments? Thanks.

Note: just before I press "send", I saw Rambo's reply. It's good to get this bug confirmed. Thanks.

Post Reply

Return to “GTMEDIA V8 SERIES”