Apstar 7 no picture
Moderators: admin, GTMedia Team
Apstar 7 no picture
Hi All,
Just recently my V8 has stopped showing a picture on 3720 & only has audio. Is this a countermeasure from the provider or am I missing something.
Regards
mrfish
Just recently my V8 has stopped showing a picture on 3720 & only has audio. Is this a countermeasure from the provider or am I missing something.
Regards
mrfish
Re: Apstar 7 no picture
check yr softcam and update it. It may be the problem. Otherwise the 3720 is fine.mrfish wrote:Hi All,
Just recently my V8 has stopped showing a picture on 3720 & only has audio. Is this a countermeasure from the provider or am I missing something.
Regards
mrfish
Re: Apstar 7 no picture
Hi freesatv7,
I have tried that before posting but it seems to not be working.
mrfish
I have tried that before posting but it seems to not be working.
mrfish
Re: Apstar 7 no picture
Check this site for new keys.
The listings I find here have some differences in frequency's and SR for the TPs from those on Lyngsat.
There are changes in the keys.
Owen
The listings I find here have some differences in frequency's and SR for the TPs from those on Lyngsat.
There are changes in the keys.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 222
- Joined: Wed Feb 01, 2017 4:16 am
Re: Apstar 7 no picture
I also receive this tp, no change in keys. check your softcam. The keys shown in the site linked by Feralkivi is correct.
Re: Apstar 7 no picture
Hi Feralkiwi & kolithawick,
I have entered the 2 ECM keys listed for this transponder & still no joy.
Thanks
mrfish
I have entered the 2 ECM keys listed for this transponder & still no joy.
Thanks
mrfish
-
- Posts: 222
- Joined: Wed Feb 01, 2017 4:16 am
Re: Apstar 7 no picture
If you can pm me your email I can send you a softcam file to try. As you don;t have 10 posts yet.
Re: Apstar 7 no picture
kolithawick,
PM sent let me know if you don't receive it & I will email you.
mrfish
PM sent let me know if you don't receive it & I will email you.
mrfish
-
- Posts: 222
- Joined: Wed Feb 01, 2017 4:16 am
Re: Apstar 7 no picture
softcam key sent check.
Re: Apstar 7 no picture
Hi Kolithawick,
Email received thank you. Can't test as my actuator has failed & I am waiting for a new to arrive. Will keep you posted when I can move my dish again. Thanks again.
mrfish
Email received thank you. Can't test as my actuator has failed & I am waiting for a new to arrive. Will keep you posted when I can move my dish again. Thanks again.
mrfish
Re: Apstar 7 no picture
Hi kolithawick,
Installed to new actuator & moved my dish to 76.5 installed you softcam file & still no picture
Regards
mrfish
Installed to new actuator & moved my dish to 76.5 installed you softcam file & still no picture
Regards
mrfish
-
- Posts: 222
- Joined: Wed Feb 01, 2017 4:16 am
Re: Apstar 7 no picture
Then no explanation left sorry,
Re: Apstar 7 no picture
My v7 use to do that for no reason while v8 works fine..did backup, factory reset, signal below 65% shows encrypt at 60% 55% no signal
Backup Reset decoder, try rescan with softcam for 3720:Syfy
See if that works..
Backup Reset decoder, try rescan with softcam for 3720:Syfy
See if that works..
Freesat v8 golden,2* Freesat 7Max 2x 1meter disk ku, 1x 1.8meter solid dish, 1x 3.1meter dish. Receive from 22west - 78East Sat Hobbyist
-
- Posts: 222
- Joined: Wed Feb 01, 2017 4:16 am
Re: Apstar 7 no picture
In your pic you have not entered the Provid (0000) or Transponder data (frequency etc after the key)
Without this information receiver cannot identify this keys are for which TP. So you must enter either Provid or Tp data (at least one of these)
easiest way is to load it through a softcam.key file. then all the necessary data will be loaded automatically.
Without this information receiver cannot identify this keys are for which TP. So you must enter either Provid or Tp data (at least one of these)
easiest way is to load it through a softcam.key file. then all the necessary data will be loaded automatically.
Re: Apstar 7 no picture
rj2010,
I have tried this & still no go.
Regards
mrfish
I have tried this & still no go.
Regards
mrfish
Re: Apstar 7 no picture
Hi kolithawick,
I did as you suggested & bugger me it works. Many thanks
mrfish
I did as you suggested & bugger me it works. Many thanks
mrfish