Freesat V8 series Firmware Update (24/05/2017)
Moderators: admin, GTMedia Team
Freesat V8 series Firmware Update (24/05/2017)
Freesat V8 series Firmware Update (24/05/2017)
24/05/2017
--V8_super.bin
change log:
1)91.5E :some channels no sound output.
2)dish moving message always pop when no signal.
viewforum.php?f=40&sid=35f6f613b1c75d0a710b75c56282cdbd
24/05/2017
--V8_super.bin
change log:
1)91.5E :some channels no sound output.
2)dish moving message always pop when no signal.
viewforum.php?f=40&sid=35f6f613b1c75d0a710b75c56282cdbd
FREESAT brand change GT MEDlA
Re: Freesat V8 series Firmware Update (24/05/2017)
please fix Timer recording.
Re: Freesat V8 series Firmware Update (24/05/2017)
I upgraded to the new software 24/05/2017.
In Antenna menu the dish move message still pops up AND the dish still moves as you go up and down the list at a normal speed.
More of a problem was that it looks like the DiSEqC move command is send before the switch command.
I found that if I was on a satellite with DiSEqC 1.1 port 4 and moved to the next sat on the list that is on Port 3,
the DiSEqC dish move command for port 3 is sent to port 4.
Very bad!!
In antenna menu it would be better if the DiSEqC commands (both move and switching) were not sent unless you move over to the right hand side menu to change those settings.
Owen
In Antenna menu the dish move message still pops up AND the dish still moves as you go up and down the list at a normal speed.
More of a problem was that it looks like the DiSEqC move command is send before the switch command.
I found that if I was on a satellite with DiSEqC 1.1 port 4 and moved to the next sat on the list that is on Port 3,
the DiSEqC dish move command for port 3 is sent to port 4.
Very bad!!
In antenna menu it would be better if the DiSEqC commands (both move and switching) were not sent unless you move over to the right hand side menu to change those settings.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat V8 series Firmware Update (24/05/2017)
Owen did you try to toggle the "Don't show Dish Moving" option in the other Menu in case it's activated by that ?
I like your idea about not moving the dish until the user enters the adjustment menu on the right hand side via the right cursor. Another improvement would be if when you entered this menu you would be positioned on the satellite you were just viewing so you wouldn't have to scroll the list to get to it.
I like your idea about not moving the dish until the user enters the adjustment menu on the right hand side via the right cursor. Another improvement would be if when you entered this menu you would be positioned on the satellite you were just viewing so you wouldn't have to scroll the list to get to it.
Re: Freesat V8 series Firmware Update (24/05/2017)
Btw I honestly think we have an issue in translation here. If you look at the release notes the fixed problem has to do with a dish movement message during No Signal which I believe was an unrelated issue.
Can anyone communicate with Lining in his native language the issue Owen is talking about ?
Can anyone communicate with Lining in his native language the issue Owen is talking about ?
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Freesat V8 series Firmware Update (24/05/2017)
I agree with sickboy, sometime misunderstanding an issueed.
Re: Freesat V8 series Firmware Update (24/05/2017)
Maybe Lining or someone from the freesat firmware developers can join the discussions. There is plenty of time between releases for them to be sure what are they going to add in the next one.
Re: Freesat V8 series Firmware Update (24/05/2017)
V8 Super Already regretted that he bought. With each update the receiver becomes worse. Online movie does not work at all. Timer recording also does not work.
Re: Freesat V8 series Firmware Update (24/05/2017)
I will look at the menu option for the "Don't show Dish Moving" option. I had not found that.sickboy wrote:Owen did you try to toggle the "Don't show Dish Moving" option in the other Menu in case it's activated by that ?
I like your idea about not moving the dish until the user enters the adjustment menu on the right hand side via the right cursor. Another improvement would be if when you entered this menu you would be positioned on the satellite you were just viewing so you wouldn't have to scroll the list to get to it.
Earlier versions of the software did take you to the satellite you were viewing when you opened the antenna menu and the TP menu opened with you on the TP you were watching. Now the TP menu is not worth opening as you have to use the recall button to change sats in the antenna menu any way.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Freesat V8 series Firmware Update (24/05/2017)
v8 super and v8 golden before and last firmware update on 24-05-2017 same problem as online movies and youtube not work
also please add input key menu for Freesat V8 Finder next firmware too.
also please add input key menu for Freesat V8 Finder next firmware too.
Re: Freesat V8 series Firmware Update (24/05/2017)
V8 super with new firmware also disappear BISS keys. Today, when the channels are switched, the receiver is frozen.
Re: Freesat V8 series Firmware Update (24/05/2017)
Hello!vvb29 wrote:V8 Super Already regretted that he bought. With each update the receiver becomes worse. Online movie does not work at all. Timer recording also does not work.
1. Online movie problem, the recent server instability, we have been repaired in progress, online movie problems and software updates does not matter.
2. Timer recording the problem, the same satellite, the same TP can be carried out, if you set Timer recording the, you change the other satellites, etc. time will change.
FREESAT brand change GT MEDlA
Re: Freesat V8 series Firmware Update (24/05/2017)
Hello!vvb29 wrote:V8 Super Already regretted that he bought. With each update the receiver becomes worse. Online movie does not work at all. Timer recording also does not work.
1. Online movie problem, the recent server instability, we have been repaired in progress, online movie problems and software updates does not matter.
2. Timer recording the problem, the same satellite, the same TP can be carried out, if you set Timer recording the, you change the other satellites, etc. time will change.
FREESAT brand change GT MEDlA
Re: Freesat V8 series Firmware Update (24/05/2017)
no timer recording No Buy.to bad it was a nice box
Re: Freesat V8 series Firmware Update (24/05/2017)
Hi All
Software 556, 24/05/2017 on V8 Golden.
I found I could not add a TP closer than 28MHz apart.
If there was a TP 3100 I can add a new TP at 3128 but not one at 3127, or 12000 and can not add 12027.
The message "TP Already Exists" comes up.
This problem has come up before and been solved but has returned.
TP's need to allowed to be added as close as 3MHz apart
Owen
Software 556, 24/05/2017 on V8 Golden.
I found I could not add a TP closer than 28MHz apart.
If there was a TP 3100 I can add a new TP at 3128 but not one at 3127, or 12000 and can not add 12027.
The message "TP Already Exists" comes up.
This problem has come up before and been solved but has returned.
TP's need to allowed to be added as close as 3MHz apart
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat V8 series Firmware Update (24/05/2017)
Feralkiwi wrote:Hi All
Software 556, 24/05/2017 on V8 Golden.
I found I could not add a TP closer than 28MHz apart.
If there was a TP 3100 I can add a new TP at 3128 but not one at 3127, or 12000 and can not add 12027.
The message "TP Already Exists" comes up.
This problem has come up before and been solved but has returned.
TP's need to allowed to be added as close as 3MHz apart
Owen
Hi,
You can add 3127. or allowed to be added as close as 3MHz apart.
If 3100 is horizontally polarized, first register with vertically polarized wave at 3127.
Then change to the desired horizontal polarization.
Please try it.
Re: Freesat V8 series Firmware Update (24/05/2017)
I tries all that and it would not work.Xsat wrote:Hi,
You can add 3127. or allowed to be added as close as 3MHz apart.
If 3100 is horizontally polarized, first register with vertically polarized wave at 3127.
Then change to the desired horizontal polarization.
Please try it.
I will try reloading the software and channel list and see if there is a change.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Freesat V8 series Firmware Update (24/05/2017)
Good day freesat.. Have anyone had a issue with some channels that shutters like play..? But other channels on same Sat / frequency work fine? With quality over 72%?
Freesat v8 golden,2* Freesat 7Max 2x 1meter disk ku, 1x 1.8meter solid dish, 1x 3.1meter dish. Receive from 22west - 78East Sat Hobbyist