V8 BİSS = NOT WORKING

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
elliikilik
Posts: 16
Joined: Thu Aug 25, 2016 9:17 pm

V8 BİSS = NOT WORKING

Post by elliikilik »

V8 BİSS = NOT WORKING
Selamlar
Bu cihazda 46 derece Azersat uydusundaki İdmanTv ne yaptımsa biss l,i sifreyi açmadı.Cihazın info düğmesine bastıgımda sunlar yazıyor.
-- FQ : 11175 / H / 27500
PID :0198 /01c8 /000b
Cihaza el ile key girmek istediğimde ise ekranda sunlar cıkıyor.
CAID 2600
Freq(dec) 11175:27500:H
Servld(hex) 000b
KeyData 0000000000000000

Dostlar basit biss açmadı.powervu +cccam +iptv tamam
Ben Servld(hex) yerlerine sıraile tek deneme yaparak 0198/01c8/000b vede 17ca gibi değerleri girdim ama yine açmadı.
keydata ya 3453450034534500 girmişti.
Yardım ve önerilerinizi bekliyorum. Saygılarımla
--------------------------------------------------------------------------------------------
Greetings
  biss idmantv what I did at 46 degrees Azersat satellite This device l, i offer my password is açmadı.cihaz the info button bastıgı writes.
- FQ: 11175 / H / 27500
PID: 0198 / 01C8 / 000B
When I wanted to enter the key manually with the device cıkıyor presented on the screen.
CAID 2600
Freq (dec) 11175: 27500 H
Servld (hex) 000B
keyData 0000000000000000

  Friends of simple biss açmadı.powerv + + iptv CCCam OK
I Servld (hex) by a single trial where the Xieraili 0198 / 01C8 / 000B and 17 of my input values but still did not like.
keyData or had entered 3453450034534500.
Waiting for your help and suggestions. Best regards

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8 BİSS = NOT WORKING

Post by Feralkiwi »

Hi elliikilik
elliikilik wrote: CAID 2600
Freq (dec) 11175: 27500 H
Servld (hex) 000B
keyData 0000000000000000
\

You must delete "0000000000000000" form KeyData and then type in your data "3453450034534500"
If you go to Biss entry from the channel you are entering the code for, the CAID FREQ SID are there for you when you "Add Code".
Delete the 0000000000000000 and type in your own code.

Google translate;
Sen " 0000000000000000 " silmeniz gerekir verilerinizi " 3453450034534500 " yazın sonra keyData oluşturmak ve
Eğer kodu giriyorsunuz kanaldan Biss girişi giderseniz " Kod Ekle" ne zaman , CAID FREK SID sizin için vardır.
0000000000000000 silin ve kendi kodunuzu girin .

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

elliikilik
Posts: 16
Joined: Thu Aug 25, 2016 9:17 pm

Re: V8 BİSS = NOT WORKING

Post by elliikilik »

Selamlar
Cevabınız için teşekkür ederim.Dediğinizi yaptım. ama malesef yinede çalışmadı.
-----------------------------------------------------------------------------------------------------
Greetings
I did ederim.de thank you for your reply. but unfortunately he did not work anyway.

elliikilik
Posts: 16
Joined: Thu Aug 25, 2016 9:17 pm

Re: V8 BİSS = NOT WORKING

Post by elliikilik »

Tekrar Selamlar
Ben su sekilde yaptım. yinede çalışmadı.

CAID 2600
Freq (dec) 11175: 27500 H
Servld (hex) 000B
keyData 3453450034534500
yazdım.. ama çalısmadı.
------------------------------------------------
Greetings again I did in the following way. It was opening again. CAID 2600
Freq (dec) 11175: 27500 H
Servld (hex) 000B
keyData 3453450034534500 I wrote .. but not working.

Garabet
Posts: 7
Joined: Thu Aug 11, 2016 12:34 pm

Re: V8 BİSS = NOT WORKING

Post by Garabet »

elliikilik wrote:Tekrar Selamlar
Ben su sekilde yaptım. yinede çalışmadı.

CAID 2600
Freq (dec) 11175: 27500 H
Servld (hex) 000B
keyData 3453450034534500
yazdım.. ama çalısmadı.
------------------------------------------------
Greetings again I did in the following way. It was opening again. CAID 2600
Freq (dec) 11175: 27500 H
Servld (hex) 000B
keyData 3453450034534500 I wrote .. but not working.
Merhaba. Önce kendi yazdıklarını sil, sonra bu SoftCam.key dosyasını usb kullanarak cihaza otomatik yükle (Import). Burada sadece Azerspace değil, birçok uydudaki kanal için Biss ve diğer şifre sistemlerini çözen parametreler var. Ben diğer uydular ve kanallarla ilgilenmememe rağmen onları silmekle uğraşmayıp hepsini yükledim. Artık AzerSpace`deki spor kanalları ve Türksat`daki DHA feed falan açılıyor.

Bu arada Google Translate Türkçeden çok kötü çeviriyor :)
Attachments
SoftCamKey.zip
SoftCam.Key file
(24.87 KiB) Downloaded 135 times

elliikilik
Posts: 16
Joined: Thu Aug 25, 2016 9:17 pm

Re: V8 BİSS = NOT WORKING

Post by elliikilik »

Tekrar Selamlar.
İlği ve verdiğiniz bilgiler için tesekkür ederim.Ben dreambox un güncel softcam keylerini atarak denemiştim.BİSS ler çalısmamıstı. Fakat powevu ile tangberk sifreleme sistemi çalısmıstı.
Bu aksam verdiğin dosyayı yükleyip. 46 derece azersat idmantv yi. deneyeceğim.
Saygılarımla..
---------------------------------------------------------------------------------------------------
Greetings again.
First and thank you for the information you provide ederim.b the DreamBox's softcam throwing the key date was çalısmamıs denemiştim.biss s. But tangberk encryption system with powev was spoon.
    install file you gave tonight. 46 degrees azersat idmantv yi. I will try.
          Best regards..

marcoscamillo500
Posts: 2
Joined: Thu Aug 18, 2016 9:51 pm

Re: V8 BİSS = NOT WORKING

Post by marcoscamillo500 »

Hello .
need help.
how do I use the biss key?
I'm brazilian .
using Amazons 61W .

User avatar
Lining
网站管理员
Posts: 1169
Joined: Thu Aug 11, 2016 11:14 am

Re: V8 BİSS = NOT WORKING

Post by Lining »

1.SoftCam.key

B 0002 3948:17600:V FE25CAED738BDCDA; Cinema World HD
BissKey TP show Keys

1.jpg
1.jpg (51.61 KiB) Viewed 6379 times
2.jpg
2.jpg (59.21 KiB) Viewed 6379 times
IMG_20160906_170051.jpg
IMG_20160906_170051.jpg (65.99 KiB) Viewed 6379 times
IMG_20160906_170210.jpg
IMG_20160906_170210.jpg (60.31 KiB) Viewed 6379 times
Guiding book

http://www.freesat.cc/forum/viewtopic.php?f=51&t=118
FREESAT brand change GT MEDlA

elliikilik
Posts: 16
Joined: Thu Aug 25, 2016 9:17 pm

Re: V8 BİSS = NOT WORKING

Post by elliikilik »

Tekrar Selamlar
19.08.2016 yazılımını attım. Güncel Dreambox softcam yükladikten sonra BİSS kanalları açmaya başladı.Cihaz son yazılım ile alınabilir oldu.
Burada yardımcı olan arkadaşlara tesekkürler.Resim yüklemeye çalıstım ama beceremedim galiba
Image
--------------------------------------------------------------------------------------------------------------------
Greetings again
I threw 19/08/2016 software. Current Dreambox softcam yükla after opening BISS channels başladı.cihaz was taken with the latest software.
    Here, thanks to friends who helped. I try to picture upload, but I think I failed
Image
Attachments
WhatsApp Image 2016-09-19 at 15.39.06.jpeg
WhatsApp Image 2016-09-19 at 15.39.06.jpeg (133.06 KiB) Viewed 6199 times

User avatar
SatTR
Posts: 21
Joined: Wed Sep 07, 2016 8:18 am
Location: Türkiye

Re: V8 BİSS = NOT WORKING

Post by SatTR »

In last firmware, biss keys are working at 46E Azersat.
Freesat Türkiye Birimi
Freesat Turkey Section
*Türkçe Dil iyileştirme çalışmaları devam ediyor*

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8 BİSS = NOT WORKING

Post by Feralkiwi »

My V8 Golden works fine with Cinema World off Telsatr18@138e.
This is the code line from the softcam.key file.
B 0002 03947:17600:V fe25caed738bdcda ;

I note the line listed from Living is;
B 0002 3948:17600:V FE25CAED738BDCDA; Cinema World HD

What I see different is the frequency has only 4 digits "3948" should be "03948"
Second: I see no space after the code or after the ; "FE25CAED738BDCDA;" should be "FE25CAED738BDCDA ; "

Try this line in your softcam.key file assuming this is the same frequency and code for your sat.
B 0002 03948:17600:V fe25caed738bdcda ;

The other thing I see in the picture from elliikilik is that there is no "B" lit in the channel banner.
This may mean that the channel info does not include that it is BISS and this is the problem for the V8.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

elliikilik
Posts: 16
Joined: Thu Aug 25, 2016 9:17 pm

Re: V8 BİSS = NOT WORKING

Post by elliikilik »

Cihaz son yazılım ile harika oldu. Dreambox um güncell softcam atımca mükemmel çalısıyor.BİİS - Tangberg -Powervu
Saygılarımla
------------------------------------------------------------
The device was wonderful with the latest software. I updated the Dreambox softcam pulses of excellent çalısıyor.biis - -Powerv of Tangberg
  Best regards

elliikilik
Posts: 16
Joined: Thu Aug 25, 2016 9:17 pm

Re: V8 BİSS = NOT WORKING

Post by elliikilik »

Selamlar Arkadaşlar.
V8 Super için güncel keylerin bulundugu softcam dosyasını nereden temin edebilirim. Bu isi bilen arkadaşlar keyler değiştiğinde softcam yenileyim burada paylasmama imkanı varsa biz kullanıcılar için kolaylık olur. Günlük yenilenen Softcam dosyası keyleri aktif olan
Saygılarımla..
--------------------------------------------------------------------------------------

Greetings Friends.
  Where can I get the SoftCam file with the current keys for the V8 Super? If the friends who know this is changing the keys, softcam renewal will be convenient for the users if there is no possibility to share here. The daily refreshed Softcam file keys are active
  Best regards..

Post Reply

Return to “GTMEDIA V8 SERIES”