RS232 for v8 UHD
Moderators: admin, GTMedia Team
RS232 for v8 UHD
I made that RS 232 about two years for the v8uhd .The first time I use about four days ago.Working very good.Wire coulors not importante.Blak n:2 and 3 RED 5.I have to cut the plastic connector to big.And I live the red at 5 the black at 3 on plastic connector The black out of the connecter at 2.........I tray to loading but problems to loading the files
Re: RS232 for v8 UHD
I tray to send the files but HTTP error.Sorrytanka wrote: ↑Mon Dec 05, 2022 10:19 amI made that RS 232 about two years for the v8uhd .The first time I use about four days ago.Working very good.Wire coulors not importante.Blak n:2 and 3 RED 5.I have to cut the plastic connector to big.And I live the red at 5 the black at 3 on plastic connector The black out of the connecter at 2.........I tray to loading but problems to loading the files
Re: RS232 for v8 UHD
Can you post pictures and screen??tanka wrote: ↑Mon Dec 05, 2022 10:59 amI tray to send the files but HTTP error.Sorrytanka wrote: ↑Mon Dec 05, 2022 10:19 amI made that RS 232 about two years for the v8uhd .The first time I use about four days ago.Working very good.Wire coulors not importante.Blak n:2 and 3 RED 5.I have to cut the plastic connector to big.And I live the red at 5 the black at 3 on plastic connector The black out of the connecter at 2.........I tray to loading but problems to loading the files
-
- Posts: 60
- Joined: Tue Oct 04, 2022 11:37 am
Re: RS232 for v8 UHD
não funciona, esse procedimento de rs232, pra voltar original v8UHD tive Q gravar eprom, muito triste GTmediacpr43 wrote: ↑Mon Dec 05, 2022 11:33 amCan you post pictures and screen??tanka wrote: ↑Mon Dec 05, 2022 10:59 amI tray to send the files but HTTP error.Sorrytanka wrote: ↑Mon Dec 05, 2022 10:19 amI made that RS 232 about two years for the v8uhd .The first time I use about four days ago.Working very good.Wire coulors not importante.Blak n:2 and 3 RED 5.I have to cut the plastic connector to big.And I live the red at 5 the black at 3 on plastic connector The black out of the connecter at 2.........I tray to loading but problems to loading the files
Re: RS232 for v8 UHD
You know the procedure always works, you didn't do something right, it can also be done with a programming clamp directly to the EEPROMmar87644321 wrote: ↑Tue Dec 06, 2022 1:26 amnão funciona, esse procedimento de rs232, pra voltar original v8UHD tive Q gravar eprom, muito triste GTmediacpr43 wrote: ↑Mon Dec 05, 2022 11:33 amCan you post pictures and screen??tanka wrote: ↑Mon Dec 05, 2022 10:59 amI tray to send the files but HTTP error.Sorrytanka wrote: ↑Mon Dec 05, 2022 10:19 amI made that RS 232 about two years for the v8uhd .The first time I use about four days ago.Working very good.Wire coulors not importante.Blak n:2 and 3 RED 5.I have to cut the plastic connector to big.And I live the red at 5 the black at 3 on plastic connector The black out of the connecter at 2.........I tray to loading but problems to loading the files
Re: RS232 for v8 UHD
The procedure with the described method does not work (No connection to the V8UHD board). I used several USB to RS232 adapters, none worked. RS232 cable does not work either. What should be the settings for the Com interface (RS232toRS232)? What signals are needed? DB9 Pin 1 -- T/R+ Pin 2 -- T/R- Pin 3 -- RXD+ Pin 4 -- RXD- Pin 5 -- GND There are several pictures of the Board of the V8HD, always with different connection designations. Which pin for which signal on the board? I'll keep trying
Is this pin interpretation correct? Is this pin interpretation correct?
Is this pin interpretation correct? Is this pin interpretation correct?
Re: RS232 for v8 UHD
No, on motherboard Yellow is TX and Black is RX
The DB9 connection is TR>TX and TX>TR on the motherboard.
If you do it using the color of the wires it would be a correct connection
The DB9 connection is TR>TX and TX>TR on the motherboard.
If you do it using the color of the wires it would be a correct connection
Re: RS232 for v8 UHD
It works!
Thank you very much.
Thank you very much.
Re: RS232 for v8 UHD
See picture attached. Thanks Caje for the correction
- Attachments
-
- Screenshot_20221206_093213_Drive.jpg (208.29 KiB) Viewed 1928 times
Re: RS232 for v8 UHD
V8 UHD Board to rs232!
- Attachments
-
- Boardtors232.jpeg (26.72 KiB) Viewed 1925 times
Re: RS232 for v8 UHD
Yes 5RED and 3 and 2 coulor of the wires not important.Looking at picture and plug the wires the same way
-
- Posts: 9
- Joined: Wed Mar 27, 2019 7:33 pm
Re: RS232 for v8 UHD
what software should I use
Re: RS232 for v8 UHD
There are new models that do not work via RS232 being necessary to do it for a programmed clip
-
- Posts: 18
- Joined: Wed Sep 20, 2023 3:35 pm
Re: RS232 for v8 UHD
I prepared the cable according to the instructions on the forum. V8UHD device is not communicating. What am I doing wrong ?
I also made a swap in the DB9 connector from pin 2->3 and 3->2, unfortunately also no communication ( according to suggestions on the forum). viewtopic.php?f=51&t=28037
How do I solve this problem ? The cable checked and there are no short circuits.
I want to get rid of MARS and go back to the original software.
Current configuration.
Red -> pin5 GND
White -> pin3 TXD
Black -> pin2 RXD
I also made a swap in the DB9 connector from pin 2->3 and 3->2, unfortunately also no communication ( according to suggestions on the forum). viewtopic.php?f=51&t=28037
How do I solve this problem ? The cable checked and there are no short circuits.
I want to get rid of MARS and go back to the original software.
Current configuration.
Red -> pin5 GND
White -> pin3 TXD
Black -> pin2 RXD
- Attachments
-
- wx_camera_1695630145306_resized_20230925_095831958.jpg (303.81 KiB) Viewed 1224 times
-
- IMG_20230925_101839_resized_20230925_095832151.jpg (389.65 KiB) Viewed 1224 times
-
- IMG_20230925_101810_resized_20230925_095832932.jpg (376.63 KiB) Viewed 1224 times
Re: RS232 for v8 UHD
You have to change the position of pin 2 and pin 3 in db9slawekkrupa wrote: ↑Mon Sep 25, 2023 8:07 pmI prepared the cable according to the instructions on the forum. V8UHD device is not communicating. What am I doing wrong ?
I also made a swap in the DB9 connector from pin 2->3 and 3->2, unfortunately also no communication ( according to suggestions on the forum). viewtopic.php?f=51&t=28037
How do I solve this problem ? The cable checked and there are no short circuits.
I want to get rid of MARS and go back to the original software.
Current configuration.
Red -> pin5 GND
White -> pin3 TXD
Black -> pin2 RXD
White -> pin2
Black -> pin3
-
- Posts: 18
- Joined: Wed Sep 20, 2023 3:35 pm
Re: RS232 for v8 UHD
After swapping pins, there is still no communication
Re: RS232 for v8 UHD
I had issues with port numbers for USB RS232.
Here are my notes on that.
Owen
Edited June 11 2021:
Here are some more note on USB to RS232 serial devices.
Here is how I got this to work
I had plugged the USB to RS232 serial device into a USB port and it loaded the driver as port 14.
The GT Media recovery tool only allows for ports 1 to 9.
I use Windows 7, this may be different for Windows 10.
I opened "My computer" / Control panel / View devices and printers.
There I can see the serial device and the port number it is using, for me that was 14.
I then clicked on it and when to Hardware / Properties / Change settings / Drivers / Uninstall.
Then I plugged in the USB to RS232 to a different USB on the other side of the laptop and it reloaded the driver as port 4.
Then I could set the recovery tool for port 4 and V7Pro.
I then worked.
Here is a link to my posts on this
Here are my notes on that.
Owen
Edited June 11 2021:
Here are some more note on USB to RS232 serial devices.
Here is how I got this to work
I had plugged the USB to RS232 serial device into a USB port and it loaded the driver as port 14.
The GT Media recovery tool only allows for ports 1 to 9.
I use Windows 7, this may be different for Windows 10.
I opened "My computer" / Control panel / View devices and printers.
There I can see the serial device and the port number it is using, for me that was 14.
I then clicked on it and when to Hardware / Properties / Change settings / Drivers / Uninstall.
Then I plugged in the USB to RS232 to a different USB on the other side of the laptop and it reloaded the driver as port 4.
Then I could set the recovery tool for port 4 and V7Pro.
I then worked.
Here is a link to my posts on this
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 18
- Joined: Wed Sep 20, 2023 3:35 pm
Re: RS232 for v8 UHD
RS232 communication between V8X is correct (I tested on another device). Unfortunately, there is no communication on the V8UHD.
-
- Posts: 9
- Joined: Wed Mar 27, 2019 7:33 pm
-
- Posts: 18
- Joined: Wed Sep 20, 2023 3:35 pm
Re: RS232 for v8 UHD
Thanks for the information, but the cable I have a good RS232.
V8UHD device is not communicating.
Please help, what is wrong?
V8UHD device is not communicating.
Please help, what is wrong?
- Attachments
-
- IMG_20230926_125808_resized_20230926_125927579.jpg (301.31 KiB) Viewed 1177 times
-
- IMG_20230926_125447_resized_20230926_125941382.jpg (489.71 KiB) Viewed 1178 times
-
- IMG_20230926_125626_resized_20230926_125940930.jpg (274.03 KiB) Viewed 1178 times
Re: RS232 for v8 UHD
Cases are occurring on some motherboards the UHD 2007-1450 doesn't seem to work either, the one that I know works has no name, you must use the programmer clip
-
- Posts: 18
- Joined: Wed Sep 20, 2023 3:35 pm
Re: RS232 for v8 UHD
"you must use the programmer clip"
@!^&%!2@!982# ???????
Can you say more about this?
Tom.w 网站管理员 - Why aren't you replying to my Wechat messages ?
I don't know much about specialized programmers. If GTMedia produced this version of the motherboard that has RS232 programming problems then GTMedia must have had knowledge that it does not support RS232 programming and a specialized programming device is needed.
I wanted to abandon the MARS software, where this software does not allow programming to the original GTMedia firmware.
Where should I send back the V8UHD to get a good device due to a manufacturing defect ? - The inability to program via RS232.
@!^&%!2@!982# ???????
Can you say more about this?
Tom.w 网站管理员 - Why aren't you replying to my Wechat messages ?
I don't know much about specialized programmers. If GTMedia produced this version of the motherboard that has RS232 programming problems then GTMedia must have had knowledge that it does not support RS232 programming and a specialized programming device is needed.
I wanted to abandon the MARS software, where this software does not allow programming to the original GTMedia firmware.
Where should I send back the V8UHD to get a good device due to a manufacturing defect ? - The inability to program via RS232.
Re: RS232 for v8 UHD
If the issue is this mother board version 2007-1450, then there must be some hardware fault with that boards RS232 connection.
slawekkrupa if you have a test meter, volts and ohms test this.
Is the ground connection for the mother board connected to ground on the mother board.
Test for ohms between the ground pin and the LNB outer, should be zero ohms.
Check that the ground pin is not connected to a voltage, like 5 volts.
Things like this happened with the V7s units and its IR remote connection on early hardware.
Test 2. during communications is there any voltage on the coms pins?
The pin from your PC should show, does the pin from the mother board show a voltage spike during coms.
Have a look at the circuits of the mother board around the RS232 connector.
Are they correct and connecting to the pins?
Owen
slawekkrupa if you have a test meter, volts and ohms test this.
Is the ground connection for the mother board connected to ground on the mother board.
Test for ohms between the ground pin and the LNB outer, should be zero ohms.
Check that the ground pin is not connected to a voltage, like 5 volts.
Things like this happened with the V7s units and its IR remote connection on early hardware.
Test 2. during communications is there any voltage on the coms pins?
The pin from your PC should show, does the pin from the mother board show a voltage spike during coms.
Have a look at the circuits of the mother board around the RS232 connector.
Are they correct and connecting to the pins?
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 18
- Joined: Wed Sep 20, 2023 3:35 pm
Re: RS232 for v8 UHD
I have a meter. Show me on the motherboard at which points I should take measurements.
- Attachments
-
- IMG_20230926_142041_resized_20230926_111436612.jpg (1.72 MiB) Viewed 1124 times
Re: RS232 for v8 UHD
The connections you already have on the RS232 cable are the ones to test with.
The ground pin on the RS232 cable compared to the ground of the V8 UHD, the best place is the outer ground of the LNB connection.
Owen
The ground pin on the RS232 cable compared to the ground of the V8 UHD, the best place is the outer ground of the LNB connection.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.