Golden Firmware (11/10/2017) is a repeat of 23/09/2017
Moderators: admin, GTMedia Team
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
@Jurgen79, it worked very fine in my box.
-
- Posts: 5
- Joined: Thu Oct 12, 2017 9:25 am
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
Hei guys I see you talking about the new software made by freesat for 17/10/17 but I can't seem to find ts location, pliz anyone with the location kindly send t here. We would like to watch champions leagues today. Pliz send the location wea the software is
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
You need to use the PC Update Tool as described here - https://freesat.cc/forum/viewtopic.php? ... 288#p14288jurgen79 wrote:Hello everyone,
I tried downloading the new sw, but it seems that there is a issue on it. I always get don't downgrade message as people as seen previously.
As well as that, I tried the hard boot way, with renamed as flash.bin, it shoes the message on screen menu. But once it restarted, it's the same old version. Do you have any new version that works flawlessly? I guess I am not the only one....
Thanks in advance. Please make a new version, that works straight out the box in terms of upgrading, just with USB connected, and no "downgrading message", that would be the solution.
I had to do this with the last firmware update but this one loaded with a usb, so if you do this once then you shouldn't need to do it again.
The new frequencies at 20W are 12510 H 2080 & 12513 H 3320
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
I hope next time, I can upgrade new firmware by USB stick, Now I can not upgrade by using PC Update Tools.
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
Great working, now really V581 on 10/11/16 has been released....
Hashing for v8_golden.bin CRC32: C31A1991
Hashing for V8_Golden_V581.zip CRC32: 57DEB4CB
Thank.
Hashing for v8_golden.bin CRC32: C31A1991
Hashing for V8_Golden_V581.zip CRC32: 57DEB4CB
Thank.
V8 Golden /Tested with v.643 20/12/17 properly recognized my irdeto CA card.
-
- Posts: 5
- Joined: Thu Oct 12, 2017 9:25 am
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
@Eak thnx, the new software worked properly
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
Thank you, I have found this issue, as soon as possible to release a new version!Feralkiwi wrote:I tested yesterday using a Hex compare program and found that the 581 version on the download page yesterday is identical to 578 software.
Lining Please note that V8 Golden V581 is a copy of 578.
Edited early Wednesday 18th Oct 2017
FIXED! The current copy V581 on the Download page is V581 and works MTN.
Owen
FREESAT brand change GT MEDlA
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
Thanks Mikelsat for your solution, however for me it doesn't seems to work even though I put the IP address shown on my box, first line from mute8888, but even after chaing static to dhcp or vice vera it's the same. Tried with network update protocol off, http and ftp, none seems to work.Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
Message par mikelsat » mar. oct. 17, 2017 8:35 pm
jurgen79 a écrit :
Hello everyone,
I tried downloading the new sw, but it seems that there is a issue on it. I always get don't downgrade message as people as seen previously.
As well as that, I tried the hard boot way, with renamed as flash.bin, it shoes the message on screen menu. But once it restarted, it's the same old version. Do you have any new version that works flawlessly? I guess I am not the only one....
Thanks in advance. Please make a new version, that works straight out the box in terms of upgrading, just with USB connected, and no "downgrading message", that would be the solution.
You need to use the PC Update Tool as described here - https://freesat.cc/forum/viewtopic.php? ... 288#p14288
I had to do this with the last firmware update but this one loaded with a usb, so if you do this once then you shouldn't need to do it again.
The new frequencies at 20W are 12510 H 2080 & 12513 H 3320
It shows to me IP is not allowed to access.
Do you have a solution, or I may have done something wrong?
Please let me know if you have a solution. Thanks in advance.
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
I managed to make it works.
The ip address shown on the box, is 192.168.XXX.XXX,, but if your X start by a 0, then do not type it on the tool update.
That's it! Have a nice day everyone.
ps: anyone, knows when they update the viaccess system?
The ip address shown on the box, is 192.168.XXX.XXX,, but if your X start by a 0, then do not type it on the tool update.
That's it! Have a nice day everyone.
ps: anyone, knows when they update the viaccess system?
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
What sat, TP, sr, is it on?patrickjm4 wrote:Hei guyz am asking how I can be able to get sport 24 extra please. The sister to sport 24
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
Has been updated, V8 Golden Firmware (19/10/2017)tox wrote:Please update Freesat V8 Golden Firmware (11/10/2017). It is a repeat of the 23/09/2017 firmware. Please check the details after downloading.
viewtopic.php?f=40&t=9&sid=e4b464e7bfeb ... 7a9fa44149
FREESAT brand change GT MEDlA
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Golden Firmware (11/10/2017) is a repeat of 23/09/2017
Thanks, New firmware update on 19-10-2017 is work fine.