V8 Golden signal intensity 0%

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
erudith
Posts: 3
Joined: Tue Oct 17, 2017 6:48 am

V8 Golden signal intensity 0%

Post by erudith »

why signal intensity freesat V8 Golden 0%? while using a new LNB, and cable connection between rx with LNB no problem or short. how to handle it?
Attachments
3.jpg
3.jpg (47.86 KiB) Viewed 2107 times
2.jpg
2.jpg (54.95 KiB) Viewed 2107 times
1.jpg
1.jpg (73.77 KiB) Viewed 2107 times

Eak_Dumnern
网站管理员
Posts: 667
Joined: Thu Aug 11, 2016 10:58 am
Location: Thailand

Re: V8 Golden signal intensity 0%

Post by Eak_Dumnern »

Try 22k change to "On" or "Auto"

erudith
Posts: 3
Joined: Tue Oct 17, 2017 6:48 am

Re: V8 Golden signal intensity 0%

Post by erudith »

Eak_Dumnern wrote:Try 22k change to "On" or "Auto"
22k have changed to auto mode, but the signal intensity remains 0%. does the new signal intensity come out % along with the signal quality?
because to scan digital broadcast from antenna ,, signal intensity not out ,, if it can channel digital program out % signal intensity and signal quality :roll:

User avatar
Feralkiwi
网站管理员
Posts: 8342
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8 Golden signal intensity 0%

Post by Feralkiwi »

With the LNB on your work bench you will only see 0%.
These boxes only show levels when there is some form of signal.
To get some form of signal you need the LNB in a dish and pointed at a sat.

Even with the dish set up, these units still show 0% on some DVB-S2 (8psk and 16psk), until you get a very good signal.

I hope this helps.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

erudith
Posts: 3
Joined: Tue Oct 17, 2017 6:48 am

Re: V8 Golden signal intensity 0%

Post by erudith »

Feralkiwi wrote:With the LNB on your work bench you will only see 0%.
These boxes only show levels when there is some form of signal.
To get some form of signal you need the LNB in a dish and pointed at a sat.

Even with the dish set up, these units still show 0% on some DVB-S2 (8psk and 16psk), until you get a very good signal.

I hope this helps.

Owen
thanks bro,,,
means true, to reciever v8 golden this must get signal satelite first new second percentage of signals appear. for beginners is very difficult to tracking. mistaken for a lnb or damaged cord.

Post Reply

Return to “GTMEDIA V8 SERIES”