V8 finder MDU5 LNB ABOUT

[exılıeo]

hi admin I am trying to be a member of your site to indicate missing information about v8 finder. But at the moment of membership there is a problem with the verification code. 

You need to add MDU5 lnb to the V8 finder software as MDU LNB (MDU1 MDU2 MDU3 MDU4 MDU5) as the lnb option. Digiturk platform that broadcasts in Turkey in particular has been working with prestigious mdu5 LNB. I ask you to correct this deficiency. 

[exılıeo]

membership problem is related to google chrome. Freesat MDU (for platform Digitürk and multiswitch) type LNBs for satellite V8 V71 finder problems, solved by your products if the new software will be in demand in Turkey. No doubt about that

[Feralkiwi]

If these Optical fibre LNB's have a normal coax LNB output with the power connector, then yes an option for the V8 Finder could be added. Such an output would allow standard finders to set up the LNB at the dish.
The big problem would be the "single IF frequency range of 950MHz - 5.45GHz"
This is well beyond the frequency range of any standard finder even if there was a fibre to coax conversion.

Also please report what problems you are having with "membership problem is related to google chrome."

Owen

[exılıeo]

I did not write anything about fiberoptic lnb. I declare the lack of software related to the mdu type lnb. Turkey's Digiturk platform for the widespread lack I told the LNB used. I will tell you. The Digiturk platform is broadcast both on Türksat and Eutelsat W7 satellite. EutelSat uses MDU type lnb for digiturk platform. If you can solve this problem, please ..

[Feralkiwi]

Google searches for "MDU LNB" returns fibre optic LNB's

Please explain more what LNB you have, its model number brand etc.

Owen

[exılıeo]

[img]http://kemeruydu.com/uploads/urunler/me ... me.jpg[img]
http://kemeruydu.com/uploads/urunler/me ... izleme.jpg
MDU5 LNB is working digiturk platform and multiswitch in turkey

[exılıeo]

MDU5 LNB SPEC.
Lokal Osilatör / local Osilator 9,75 / 10.600 Ghz
Gürültü Seviyesi / Noise level 0,3 dB
Frekans / Frequency RF(V): 10.78-10.95GHz/11.428-11.7GHz RF(H): 10.78-10.95GHz/11.45-11.7GHz IF(V): 950-1222MHz7/1700-1870MHz IF(H): 1335-1585MHz/1980-2150MHz

[Feralkiwi]

This looks like it is shifting the two bands and two polarities to four IF bands as a one cable solution.

You should be able to blind scan in all the channels after setting up one satellite with a LNB setting of 9750.
The frequencies reported will not match those listed on sites like Lyngsat but they should be there.

Some of the frequencies will likely report correct with 9750, other will report with 10700, 11450 and the other, 11085, is not there to use.

Each LNB freq will be a different polarity and band.
You could setup four sats with different LNB freq's and polarity settings and scan the frequencies for each one (delete those for the other sats) so they are correct in your scanner.

Engineer please note:
Yes a setting option for this type of LNB would be useful.
MDU5 LNB SPEC.
Lokal Osilatör / local Osilator 9,75 / 10.600 Ghz
Gürültü Seviyesi / Noise level 0,3 dB
Frekans / Frequency RF(V): 10.78-10.95GHz/11.428-11.7GHz RF(H): 10.78-10.95GHz/11.45-11.7GHz IF(V): 950-1222MHz7/1700-1870MHz IF(H): 1335-1585MHz/1980-2150MHz

Owen