invalid format

[Bm931]

updated v8 super to v658, now T.V says invalid format. anyone have ant clue to whats going on ?

[Eak_Dumnern]

How are you update your Freesat v8 super?

Maybe you are USB format to Fat32 before update firmware. If you have USB USB-Stick of USB 3.0 your box not support.

Try to do

[Feralkiwi]

Try changing the output setting on the Freesat box.

Some older TV's did not do some formats of HDMi.

Connect to the AV cable (SCART) to see what you are doing.

If you get stuck and can not see the picture to get to the menu there is a Green button method they added to change from NTSC to Pal etc.

Added fast key to switch video output mode or format.
we try to support some old TV or some signal mode TV
Press menu key to main menu.(Panel show "----")
press Green key to switch NTSC/PAL, the panel will show "PAL " or "NTSC"
Press Stop key to switch the video format
PAL mode : the panel will show "576I" -- "576P" -- "720P"(50HZ) --"1080I"(50HZ) --"1080P"(50HZ)
NTSC mode : the panel will show "480I" -- "480P" -- "720P"(60HZ) --"1080I"(60HZ) --"1080P"(60HZ)

Owen

[Bm931]

Thanks Owen. I hooked it up to a different T.V and it shows. IT IS updated by flash drive, cant remember what it was formatted to. Ill try what you suggested. Thanks for your help.