Page 1 of 1
V8 Problem
Posted: Wed May 23, 2018 2:53 pm
by ollie2018uk
Hi,
When I go to try and align to 28.2e I cant't seem to find it, the V8 never seems to get over 40% on the signal strength. However If I turn it off and then on it will lock onto the 1st TP?! Is this normal?
Re: V8 Problem
Posted: Wed May 23, 2018 9:53 pm
by Feralkiwi
Check that you have the correct switch settings for your cable / LNB set up.
Also if you have a universal LNB you need to set for that too.
When aligning the dish, go to the TP menu and use the signal strength there on a TP you know works well.
You need to move slowly and wait for the signal meter in the V8 to catch up.
I use an already scanned in channel with the TV volume up and tune the dish slowly until I hear the channel.
I hope this explains something for the problem you are having.
Owen
Re: V8 Problem
Posted: Thu May 24, 2018 3:45 pm
by ollie2018uk
Thanks Owen,
My settings are correct for the LNB, I guess i'm expecting too much from a £60 piece of kit?!
I too resorted to your method, which kind of makes the V8 redundant!!
Re: V8 Problem
Posted: Thu May 24, 2018 8:51 pm
by Feralkiwi
You must be talking about a V8 Finder. I assumed you had a V8 Super or golden.
Owen
Re: V8 Problem
Posted: Fri May 25, 2018 9:12 pm
by ollie2018uk
Sorry I must be