V8 NOVA FIRMWARE
Moderators: admin, GTMedia Team
V8 NOVA FIRMWARE
Hi,
My new receiver V8 Nova must have some problem: I found no way to insert any cam nor its possible to access Network app, DLNA,Sazip and on line movie, IPTV.
What's the issue?
Can anyone help me?
My new receiver V8 Nova must have some problem: I found no way to insert any cam nor its possible to access Network app, DLNA,Sazip and on line movie, IPTV.
What's the issue?
Can anyone help me?
Re: V8 NOVA FIRMWARE
bende yewni yazılımı yükledim. ıptv ler açılmıyor
Re: V8 NOVA FIRMWARE
I installed the new software.
iptv's not open
iptv's not open
Re: V8 NOVA FIRMWARE
some are freezing in some TV channels.
you need to restart from the power button
you need to restart from the power button
Re: V8 NOVA FIRMWARE
can not get signal in usals mode
Re: V8 NOVA FIRMWARE
I have not tried USALS yet.SANCAKTAR wrote:can not get signal in usals mode
It was said to be fixed with the last update.
I will try to test tomorrow.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8 NOVA FIRMWARE
V8 NOVA FIRMWARE support for freesat v8 super?
Re: V8 NOVA FIRMWARE
Nope different receivers, and dont try to load firmware that is not made for your receiver you might end up with a door stop.4ndr3 wrote:V8 NOVA FIRMWARE support for freesat v8 super?
Re: V8 NOVA FIRMWARE
IPTV is not working
When you login to Xtram IPTV is hangs up and have to Switch off from piwer button
The other GTMedia Freesat abroad IPTV is useless no channels no login nothing
Any solution or i should return back the receiver ?
When you login to Xtram IPTV is hangs up and have to Switch off from piwer button
The other GTMedia Freesat abroad IPTV is useless no channels no login nothing
Any solution or i should return back the receiver ?
Re: V8 NOVA FIRMWARE
Goto "Tools" then xlick "Conditional Access" after that click 6666 then you can enter cam or import softcam.key filespok2010 wrote:Hi,
My new receiver V8 Nova must have some problem: I found no way to insert any cam nor its possible to access Network app, DLNA,Sazip and on line movie, IPTV.
What's the issue?
Can anyone help me?
Re: V8 NOVA FIRMWARE
I also havr same problemSANCAKTAR wrote:I installed the new software.
iptv's not open
Both IPTV is not working
Re: V8 NOVA FIRMWARE
Hi,SANCAKTAR wrote:can not get signal in usals mode
Yes, USALS can not read signal strength as same as V8S too.
It's firmware issues.
V8S old F/W was OK, But V8NOVA not fix it.
Re: V8 NOVA FIRMWARE
I tested my V8 Nova using the 27 June software and it does USALS ok.SANCAKTAR wrote:can not get signal in usals mode
Edited:
I tested again using the DiSEqC motor setting and it works through the switches with that too.
I tested it directly connected, OK.
Connected through a DiSEqC 1.0 switch, OK.
Connected through a DiSEqC 1.1 switch, OK.
Connected through both a DiSEqC 1.1 and DiSEqC 1.0 switch, cascade, OK.
This is the first time I have had USALS work through cascade switching with Freesat units.
Well done Freesat.
My test used a 1m cable from the box to the switches and then a 10m to the dish / mover.
I loaded port 1 of the switches with a LNB and used ports 3 or 5.
I had no splitter in the circuit.
I did note that if the dish needs to move some distance I had to change channel to another channel on the same sat to get a signal.
SANCAKTAR, if you are still having problems getting a signal with USALS check you have the correct longitude set for each sat, east west etc, and that you have you correct lat / long set in your "Location" (Green button from the menu).
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8 NOVA FIRMWARE
Alguien me puede ayudar por favor , algun tutorial de como puedo instalar las listas iptv.
Re: V8 NOVA FIRMWARE
There are instructions on the download / tool page.ffm wrote:Alguien me puede ayudar por favor , algun tutorial de como puedo instalar las listas iptv.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.