no remote control - sr33 error

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
fridgex
Posts: 3
Joined: Thu Jul 12, 2018 5:22 pm

no remote control - sr33 error

Post by fridgex »

Hi , after software update, my remote control is not working on v8 golden.
When i power on: i see BOOT, LOAD, SR33 and then channel number.
The POWER-ON/OFF, channel-UP and channel-DOWN buttons on the outside of the box are working OK.
But i need the remote control to work.
the remote control is ok, i tested it with my mobile phone camera.
flashing over rs232 works fine, i've tried old and new v8 golden firmware, but remote is not working.
can u help ?

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: no remote control - sr33 error

Post by Feralkiwi »

When remote batteries get low the remote will send incorrect codes.

Also are you seeing any picture?

It may be that you have a NTSC TV and the unit is sending PAL.

They added this feature.
Added fast key to switch video output mode or format.
we try to support some old TV or some signal mode TV
Press menu key to main menu.(Panel show "----")
press Green key to switch NTSC/PAL, the panel will show "PAL " or "NTSC"
Press Stop key to switch the video format
PAL mode : the panel will show "576I" -- "576P" -- "720P"(50HZ) --"1080I"(50HZ) --"1080P"(50HZ)
NTSC mode : the panel will show "480I" -- "480P" -- "720P"(60HZ) --"1080I"(60HZ) --"1080P"(60HZ)
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

fridgex
Posts: 3
Joined: Thu Jul 12, 2018 5:22 pm

Re: no remote control - sr33 error

Post by fridgex »

It's working again !
TY.

Fyx
Posts: 42
Joined: Tue Nov 08, 2016 8:24 am

Re: no remote control - sr33 error

Post by Fyx »

Feralkiwi wrote:When remote batteries get low the remote will send incorrect codes.

Also are you seeing any picture?

It may be that you have a NTSC TV and the unit is sending PAL.

They added this feature.
Added fast key to switch video output mode or format.
we try to support some old TV or some signal mode TV
Press menu key to main menu.(Panel show "----")
press Green key to switch NTSC/PAL, the panel will show "PAL " or "NTSC"
Press Stop key to switch the video format
PAL mode : the panel will show "576I" -- "576P" -- "720P"(50HZ) --"1080I"(50HZ) --"1080P"(50HZ)
NTSC mode : the panel will show "480I" -- "480P" -- "720P"(60HZ) --"1080I"(60HZ) --"1080P"(60HZ)
Owen
wow, never knew about this will try on my v8 golden thanks

Post Reply

Return to “GTMEDIA V8 SERIES”