POWERVU - CANNOT ADD NEW NUMBERS

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
nanirdjeff1937
Posts: 25
Joined: Sun Jun 24, 2018 9:23 pm
Location: Texas, USA

POWERVU - CANNOT ADD NEW NUMBERS

Post by nanirdjeff1937 »

I am using a FREESAST V8 SUPER. Need to add new POWERVU numbers - but - receiver does not allow me to access "CONDITIONAL ACCESS". Do I need to be in a special area using the remote? Any help would be appreciated.

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: POWERVU - CANNOT ADD NEW NUMBERS

Post by cpr43 »

nanirdjeff1937 wrote:I am using a FREESAST V8 SUPER. Need to add new POWERVU numbers - but - receiver does not allow me to access "CONDITIONAL ACCESS". Do I need to be in a special area using the remote? Any help would be appreciated.
Attachments
20180904_163539.jpg
20180904_163539.jpg (318.45 KiB) Viewed 2181 times

nanirdjeff1937
Posts: 25
Joined: Sun Jun 24, 2018 9:23 pm
Location: Texas, USA

Re: POWERVU - CANNOT ADD NEW NUMBERS

Post by nanirdjeff1937 »

I thank you for the POWERVU keys. However, I have a question - on the grid it gives the following information - CIAD, PROV, IDX and KEYDATA.

I cannot change or add any thing to the CIAD - should I be able to?
What do I add/change in PROV?
IDX I have reasoned is where the "0" and the "1" goes - is this correct?
And the numbers that have been suplied go to - KEYDATA

My Freesat V8 Super receiver does not appear to have the POWERVU PROGRAM loaded. My Freesat V7 automatically loads the program when you re-start the receiver - gives information as to the LAN connection and the POWERVU information, which ends in ????? 3 - and it does this automatically each time the receiver is disconnected or shut down. The V8 only shows that the LAN connection is connected, and there is no mention of POWERVU.

How do I get this POWERVU program to load?

I thank you for your time and help in this matter.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: POWERVU - CANNOT ADD NEW NUMBERS

Post by Feralkiwi »

Please look at these instructions on Powervu entry.
As for the Caid. This does not need changing as if you are entering a Powervu code the Caid is for that channel's powervu.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

nanirdjeff1937
Posts: 25
Joined: Sun Jun 24, 2018 9:23 pm
Location: Texas, USA

Re: POWERVU - CANNOT ADD NEW NUMBERS

Post by nanirdjeff1937 »

Thank you feralkiwi for this information - will proceed accordingly.

User avatar
Marsat
Posts: 748
Joined: Tue Jun 19, 2018 6:52 am
Location: Miami

Re: POWERVU - CANNOT ADD NEW NUMBERS

Post by Marsat »

nanirdjeff1937 wrote:Thank you feralkiwi for this information - will proceed accordingly.
Maybe is easier to upload a softcam key file, isn't it?

Post Reply

Return to “GTMEDIA V8 SERIES”