I'm trying to recover my freesat V8 Super via RS232, selecting project type "Sonata DDR3" but in the middle of the process it gives me the following error .:
Please reset the STB!
BOOTROM ...
UPG ...
DDR Calibration Completed
start send upgclient
Start to check serial ...
!! UpgClientTest FAIL: Can not receive any responses from STB !!
!! UpgClientTest FAIL: Can not receive any responses from STB !!
!! UpgClientTest FAIL: Can not receive any responses from STB !!
!! UpgClientTest FAIL: RSP error !!
RS232 V8 Super
Moderators: admin, GTMedia Team
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: RS232 V8 Super
you read this here. click
or flash your box.
download new firmware and change name file "flash.bin"
copy into U-Stick.
input U-Stick at your box.
turn on your box still press menu on remote control and rapid repeating
wait firmware re-loader and finished , then reboot.
or flash your box.
download new firmware and change name file "flash.bin"
copy into U-Stick.
input U-Stick at your box.
turn on your box still press menu on remote control and rapid repeating
wait firmware re-loader and finished , then reboot.