UNEVEN SOUND - FREESAT V8 SUPER
Moderators: admin, GTMedia Team
-
- Posts: 25
- Joined: Sun Jun 24, 2018 9:23 pm
- Location: Texas, USA
UNEVEN SOUND - FREESAT V8 SUPER
I am getting an UN-EVEN sound from my Freesat V8 Super. In other words, the sound goes UP and DOWN during any show, sometimes the sound is non-existent during this. Have changed cables still un-even. Suggestions?
Re: UNEVEN SOUND - FREESAT V8 SUPER
Maybe a glitch in the system. Make a database backup, do a Factory reset and reload your database and seenanirdjeff1937 wrote:I am getting an UN-EVEN sound from my Freesat V8 Super. In other words, the sound goes UP and DOWN during any show, sometimes the sound is non-existent during this. Have changed cables still un-even. Suggestions?
Re: UNEVEN SOUND - FREESAT V8 SUPER
As you also say you are having problems with your remote, check that the left right buttons are not jammed "ON" on your remote, or are weak and work with little pressing.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: UNEVEN SOUND - FREESAT V8 SUPER
My freesat V8 Super was doing this last week, all I had to do unplug the power from the back of the receiver then plug it back in.nanirdjeff1937 wrote:I am getting an UN-EVEN sound from my Freesat V8 Super. In other words, the sound goes UP and DOWN during any show, sometimes the sound is non-existent during this. Have changed cables still un-even. Suggestions?
Re: UNEVEN SOUND - FREESAT V8 SUPER
well done iqiq180 wrote:My freesat V8 Super was doing this last week, all I had to do unplug the power from the back of the receiver then plug it back in.nanirdjeff1937 wrote:I am getting an UN-EVEN sound from my Freesat V8 Super. In other words, the sound goes UP and DOWN during any show, sometimes the sound is non-existent during this. Have changed cables still un-even. Suggestions?
I have tis issue from time to time. Just reboot the device. It should do the trick
As per your remote follow cpr43 instructions on the other thread you open. Suggestion slow down . and yes I've been there too