Some point of V8 Angel need more improve.

For V8 angle
Freesat S805
Freesat S905X

Moderators: admin, Rambo, Freesat Team

zcache
Posts: 101
Joined: Fri Aug 12, 2016 2:42 am

Some point of V8 Angel need more improve.

Postby zcache » Tue Nov 22, 2016 2:16 am

Hi Freesat and all friends,

I would like to report after many days used, I think something need more improve.

0. ???
0.1 Turn on logo, what is this? It appear before V8 logo animation.
Image
0.2 Often(always) show like this picture every time turn it on. After press ok everything go usual.
Image


1. About timer/Schedule
1.1 Difficult/Complicate to access timer, only from menu that show booklist or something about booking.
1.2 Can't to adjust a start and end time that prefer to make a booking.
Image
Image

1.3 Duration time of add event from channel list not to understood (no unit MIN or Hour).
Image
Image

you will know what a unit after put some value in it.
Image

1.4 Can't make a booking record from channel list, it shown message something like "Scrambled channel not support PVR". What wrong this?
Image

1.5 EGP always show on Sunday
Image

2. About information on screen and GUI
2.1 Need more information showing on infobar. Picture resolution, audio codec, scrambled or descrambled type method, percent of current program has shown, etc.
Image
2.2 Often show up "no signal" every time change channel (S2 and T2)
2.3 No any message with scrambled channel just freez frame.
2.3 Still not support with Thai language in KU Band.

3. Channel and editor
3.1 Very very difficult and very complected to edit channel list.
3.2 Strongly need S2 also effective with LCN of T2 activated, also same feature with previous V8 series and also useful and full function of channel arrange program.

Please take to your consideration, it will make your box more convenient to use.

I will continue information more later...
PS, I did not use the sharing account so I can't tell about it also DVB-C, I'm sorry. Who have any information, picture please share.
Last edited by zcache on Wed Nov 23, 2016 2:21 pm, edited 1 time in total.
V8 Pro /Timing record improperly work.
V8 Golden /Tested with v.24/5/17 still unknown irdeto CA card.
V8 Angel /Cheap sold out!..

User avatar
nzl229
Posts: 44
Joined: Mon Aug 08, 2016 2:54 am

Re: Some point of V8 Angel need more improve.

Postby nzl229 » Wed Nov 23, 2016 7:39 am

Freesat team have received you advices, we add some points to ours task list.
And the problem that --- 1.4 Can't make a booking record from channel list, it shown message something like "Scrambled channel not support PVR" have been fixed in the lastest firmware.

Thanks

zcache
Posts: 101
Joined: Fri Aug 12, 2016 2:42 am

Re: Some point of V8 Angel need more improve.

Postby zcache » Wed Nov 23, 2016 9:08 am

nzl229 wrote:....
.... 1.4 Can't make a booking record from channel list, it shown message something like "Scrambled channel not support PVR" have been fixed in the lastest firmware.

Thanks


I'm already with newest firmware. I wish you recheck again
Image
1. make a record by EPG --- OK it working well
Image
2. make a record by channel list that I shown --- not yet ok
Image
V8 Pro /Timing record improperly work.
V8 Golden /Tested with v.24/5/17 still unknown irdeto CA card.
V8 Angel /Cheap sold out!..

DimkaOi
Posts: 1
Joined: Fri Oct 21, 2016 3:57 pm
Location: Qatar
Contact:

Re: Some point of V8 Angel need more improve.

Postby DimkaOi » Sat Nov 26, 2016 2:16 pm

квартиракомнатажилье
http://azindie.com/forum/showthread.php?tid=221391 сдам квартиру без посредников москва авито http://grand.orkestr.net/forum/viewtopic.php?f=8&t=66388

zcache
Posts: 101
Joined: Fri Aug 12, 2016 2:42 am

Re: Some point of V8 Angel need more improve.

Postby zcache » Sun Jan 01, 2017 2:03 pm

New firmware still not support with LCN so sad, tested littlebit point and kept it back in the box. Scrambled message still stuck on screen eventhough it was decrypted. (With CA smartcard not ccamd)

20170101_064644.jpg
20170101_064644.jpg (1.82 MiB) Viewed 2779 times


20170101_064738.jpg
20170101_064738.jpg (1.83 MiB) Viewed 2779 times

20170101_065702.jpg
20170101_065702.jpg (1.41 MiB) Viewed 2779 times
V8 Pro /Timing record improperly work.
V8 Golden /Tested with v.24/5/17 still unknown irdeto CA card.
V8 Angel /Cheap sold out!..

mahendrakaru
Posts: 2
Joined: Thu Oct 13, 2016 1:38 am

Re: Some point of V8 Angel need more improve.

Postby mahendrakaru » Wed Jan 04, 2017 9:05 am

I Bought V8 Angel from Aliexpress Last week. But I cannot watch scrambled Intelsat 20 all powervu & Newsdatacom Channels (Sony, Discovery, APL, TLS, BBC & more). But I have V7HD & V8 Golden. I can watch all Powervu & Newsdatacom channels using V7HD & V8 Golden.

What can I do for V8 angel to solve this problem?

moizhesm
Posts: 31
Joined: Mon Dec 19, 2016 10:37 am

Re: Some point of V8 Angel need more improve.

Postby moizhesm » Thu Jan 05, 2017 6:14 am

I have received this box few days ago with 1.0.6 firmware installed .Basic thing,that make this box unusable is "scrambled program" message that appear on DECRIPTED channels . Sharing emulator in SAT section work fine. ( newcamd) . After firmware upgrade to last version 1.0.7 - same thing - "scrambled program" on DECRYPTED channel. I read on this forum, that problem with "scrambled channel" message exist from FW to FW and doesn't fixed up today. Can you make any patch to fix this problem ? Impossible to watch TV with a black message on the screen center :D

eumesmo
Posts: 177
Joined: Mon Aug 29, 2016 10:29 am
Location: Portugal

Re: Some point of V8 Angel need more improve.

Postby eumesmo » Thu Jan 05, 2017 10:44 am

I'm going to buy a Wetek Play 2, it's android and support 4K
http://wetek.com/product/wetek-play2

You should try it too.

price is not so different from V8 Angel, and it works!
V8 Pro/V8 Golden/V8 Angel/ eyeTV with eytvcamd

zcache
Posts: 101
Joined: Fri Aug 12, 2016 2:42 am

Re: Some point of V8 Angel need more improve.

Postby zcache » Fri Jan 06, 2017 2:49 am

eumesmo wrote:I'm going to buy a Wetek Play 2, it's android and support 4K
http://wetek.com/product/wetek-play2

You should try it too.

price is not so different from V8 Angel, and it works!


Yes, that right but in the market that I know and can found only V8 Angel capable to read the CA smartcard. I has feedback many thing to them, but they don't care. It's a good product just bad only program, so sad.
V8 Pro /Timing record improperly work.
V8 Golden /Tested with v.24/5/17 still unknown irdeto CA card.
V8 Angel /Cheap sold out!..

eumesmo
Posts: 177
Joined: Mon Aug 29, 2016 10:29 am
Location: Portugal

Re: Some point of V8 Angel need more improve.

Postby eumesmo » Fri Mar 03, 2017 10:42 am

zcache wrote:
eumesmo wrote:I'm going to buy a Wetek Play 2, it's android and support 4K
http://wetek.com/product/wetek-play2

You should try it too.

price is not so different from V8 Angel, and it works!


Yes, that right but in the market that I know and can found only V8 Angel capable to read the CA smartcard. I has feedback many thing to them, but they don't care. It's a good product just bad only program, so sad.


My TV Provider CA smart card is locked to they Box, so i won't need it, i simply need a stable box that supports DVB-C
V8 Pro/V8 Golden/V8 Angel/ eyeTV with eytvcamd

osipec
Posts: 16
Joined: Fri Mar 03, 2017 3:18 pm

Re: Some point of V8 Angel need more improve.

Postby osipec » Sun Mar 05, 2017 4:03 pm

I ask for help, please help turn off automatic channel search, the receiver itself searches for TV channels and radio, independently changes the channel list.
I noticed if I switch to the coded channel, but it did not open on time, (due to the glitch of the Oscam, for example) the signal quality fluctuates, hangs and switches to a new, just found channel. Probably he scans this transponder and when you open the list you see a bunch of unnecessary, previously deleted channels! In my opinion, somewhere in the system it is necessary to remove the appropriate tick (just do not know where), in my opinion there can not be such a glitch due to the iron.


Return to “Android box”

Who is online

Users browsing this forum: No registered users and 1 guest